9 best air screwdrivers

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Pneumatic screwdrivers are distinguished by the absence of a motor and a simpler design. This has worked for the low weight and allows you to use them without time limit. For operation, you will need a powerful compressor and a storage receiver. Such a pneumatic tool is practical in furniture factories and other assembly industries, where a durable screwdriver is required, designed for everyday use. Let's figure out which air screwdriver is the best, for which we compare the nine most popular products of this type from global brands.

Rating of the best pneumatic screwdrivers

When compiling the TOP-9 of the best pneumatic screwdrivers, we took into account both the characteristics of the tool and customer reviews. This helped to create a balanced description with the pros and cons of the products, so the review will be without rose-colored glasses.

Nomination	a place	Name of product	price
Rating of the best pneumatic screwdrivers	1	Bosch 0 607 460 400	RUB 29 406
	2	Senco SEN602C	RUB 14 628
	3	Schneider Airsystems DRS 810	RUB 26 839
	4	Senco SEN610	RUB 14,900
	5	SUMAKE ST-4488	RUB 22,644
	6	Metabo DS 14	RUB 8 449
	7	JONNESWAY JAB-1017	8 420 RUB
	8	Fubag SL120	5 382 rub.
	9	Gross G208	RUB 6,525

Bosch 0 607 460 400

Rating: 4.9

In the first place is a pneumatic screwdriver from “Bosch”, which is designed for a pressure of 6.3 atm, and also needs 810 liters of air every minute. This flow allows the pneumatic tool to spin the tooling up to 750 rpm. On the back of the pistol there is a valve for adjusting the tightening force with parameters 1.5-8 Nm. Use a 1.4-inch herringbone fitting to connect the air hose. The inner diameter of the hose from the compressor must have a cross section of at least 10 mm, then the unit will operate without loss of power. In the reviews, users like the 15 cm handle length, which is suitable for people with large hands. The owners are also pleased with the relatively low weight of the pistol, which is 800 g. It is convenient to work with it all day long, and the body is almost not heated.

We rated this air screwdriver as the best due to the screwing depth stop. This allows you to set the exact degree of screwing in the fasteners and not damage the surface of the material if it is fragile.

Advantages

• durable body;
• comfortable to hold in hand;
• weight 800 g;
• adjustment of pressure and tightening torque is provided.

disadvantages

• high price;
• loud work 84 dB;
• difficult to connect the hose to the herringbone adapter;
• a powerful compressor is required due to an air flow of 810 l / min.

Senco SEN602C

Rating: 4.8

In second place is a pneumatic screwdriver from the American brand Senco, made in an L-shaped case. The model has two rubber pads on the handle for increased grip. The pneumatically driven hex screwdriver chuck is capable of up to 800 rpm and tightens fasteners with a force of 14.7 Nm. The manufacturer has taken care of the ability to adjust the screwing hardness in order to work with the tool on both soft and hard materials. Operation will require a pressure of 8 atm and a compressor capable of providing 453 liters per minute. The pneumatic screwdriver weighs 1.1 kg and operates at a volume of 78 dB.

The pneumatic screwdriver is interesting in the presence of a second handle, which can be rotated around the body by 360 degrees. This not only improves grip reliability, but also facilitates pressure so that it is convenient to press on the fastener. Given that this instrument does not have a percussion function, this dual-handle configuration contributes to improved performance over comparable single-handle devices.

Advantages

• there is a reverse;
• rubber pads on the handle;
• durable steel body;
• provides increased performance;
• light weight 1.1 kg.

disadvantages

• when rotating, the second handle scratches the paint on the screwdriver body;
• not very convenient to switch reverse.

Schneider Airsystems DRS 810

Rating: 4.7

The pistol-type pneumatic screwdriver from Schneider Airsystems consumes 360 liters of air per minute, therefore it is less “voracious” in comparison with the participants described above. The body of the tool is made of metal, and the handle is covered with anti-slip pads, which increase the grip reliability. The model operates with a pressure of 7 atm and spins the spindle up to 1650 rpm. In this case, the tightening rigidity of the fasteners can be adjusted with a maximum of 8 Nm. To connect to the compressor, you need a hose with an inner diameter of 9.5 mm. Reviews show that the screwdriver lies comfortably in the hand, but it is inconvenient to rest with the second hand when pressing.

This pneumatic screwdriver is the best thought-out connection of the compressor hose to the gun. This is usually a weak point, since the hose is often kinked from the bend and then burst. We have to cut it off and rearrange the fitting. Here, the manufacturer produces a pistol with an already built-in communication segment, protected by a thick shell and having a dense metal crimp at the entry point. The hose from the compressor is already connected to a flat area after 50 cm, so it does not break.

Advantages

• there is an adjustment of the tightening torque;
• rubberized handle;
• reliable metal case;
• consumes 360 liters of air per minute.

disadvantages

• high price;
• slippery trigger;
• screw-in depth is not adjustable.

Senco SEN610

Rating: 4.7

And here is another American model from Senco, which consumes 540 l / min of air at a pressure of 6.3 atm, and generates a torque of up to 5.5 Nm. If necessary, the tightening force can be reduced to 0.5 Nm in order not to damage the fragile material. The pneumatic screwdriver is made in a black metal case and has two rubber pads so as not to slip in the hands. The manufacturer has taken care of the ergonomically shaped trigger, comfortable for long finger pressing. Reverse is provided on the side. In reviews, the model is liked by professionals for its narrow chuck shape, which facilitates access to small mounting holes and openings.

We have put the air screwdriver in the list of the best due to the increased number of revolutions that do not fall under load that the spindle is capable of. This model can rotate at 1800 rpm. Not all pneumatic units are capable of this, so choose this screwdriver for high performance when there is a large amount of assembly or disassembly ahead.

Advantages

• the finger does not slide off the trigger;
• there is a reverse for changing the direction of rotation;
• narrow cartridge configuration;
• ergonomic shape of the handle.

disadvantages

• needs a powerful compressor due to a flow rate of 540 l / min;
• requires constant lubrication;
• can only be purchased on order.

SUMAKE ST-4488

Rating: 4.6

And here is a professional pneumatic screwdriver from the Taiwanese brand SUMAKE. The model consumes 450 liters of compressed air with a pressure of 6.2 atm. The connection from the compressor is made through a threaded connection and a 1/4 socket. To keep the volume of air supplied at the correct level, a hose with an inner diameter of 9.5 mm is required. The pistol grip is completely covered with rubber, so the tool is securely held even during active manipulation. But the weight of this model is slightly more than the others and is 1.4 kg. In reviews, buyers like the pneumatic screwdriver with a high reverse lever, which is convenient to switch with thick work gloves.

The pneumatic screwdriver is recognized by us as the best in terms of tightening force. Among its analogues, it has a rather high indicator – 16.4 Nm. This allows fasteners with a diameter of up to 7 mm to be screwed in. But if you need to screw in something very delicately, then the tightening torque can be reduced to 5.1 Nm.

Advantages

• the handle is completely covered with anti-slip material;
• the case is resistant to damage if dropped;
• the reverse is convenient to switch even when wearing work gloves;
• able to function for a long time without overheating.

disadvantages

• weighs 1.4 kg;
• high price;
• threaded union.

Metabo DS 14

Rating: 4.5

The German brand Metabo has developed the DS 14 pneumatic screwdriver, which consumes 340 l / min at a pressure of 6.2 atm. Its twisting rigidity is adjustable in the range of 5-14 Nm, and the rotation speed of the hexagonal chuck reaches 1800 rpm. The pneumatic tool weighs 1.2 kg. The maximum diameter of screw-in fasteners is allowed up to 6 mm. The buyers in the reviews are pleased that these pneumatic screwdrivers, like all other Metabo products, undergo pre-sale training, which excludes the implementation of defects. This reduces the likelihood of buying a broken tool over the Internet. In the kit, the manufacturer immediately supplies three 1/4 nipples for a variety of connection arrangements (ISO, EURO, ARO). The company also donates a bottle of oil so that you have everything you need to get started.

This model stands out with several advantages over analogues. Firstly, it has a very comfortable grip, which, in addition to the rubber pad, also contains ergonomic cutouts for the fingers. This configuration improves grip comfort and reduces hand strain. Secondly, the pneumatic screwdriver vibrates at a level of 3.6 m / s², so the hand of the master gets even less tired (other models have an indicator of 4.0 m / s²).

Advantages

• there is an adjustment of the tightening torque;
• convenient reverse switch;
• consistently delivers the declared power, regardless of the load;
• the handle is covered with rubber.

disadvantages

• very noisy operation 94-105 dB;
• paint on the body is gradually erased.

JONNESWAY JAB-1017

Rating: 4.4

And here is another simple and very reliable air screwdriver from JONNESWAY. The tool operates on compressed air with a pressure of 6.2 atm, giving out 1800 rpm with a tightening torque of 14 Nm. The metal body is not painted with anything, so the product retains its original appearance, despite long-term use. The grip is rubber coated and has ergonomic cutouts. In the reviews, the pneumatic screwdriver is liked by the owners of the narrow shape of the cartridge, which comes in handy when screwing fasteners between closely spaced parts. Another product of the JONNESWAY brand from the category of pneumatics is distinguished by an increased warranty, for a period of 2 years, which also prompts some to make a choice in favor of this product.

We marked the pneumatic screwdriver as the best in terms of compressed air consumption. For efficient operation, 120 liters per minute is required, and this does not require a powerful compressor and a spacious receiver. But in terms of performance, this model is not inferior to those that consume 400-600 l / min, so the product looks much more profitable than competitors.

Advantages

• narrow cartridge shape;
• comfortable grip;
• the handle is completely covered with rubber;
• signed directions of the reverse switch.

disadvantages

• the reverse switch jumps at the slightest touch;
• no torque adjustment.

Fubag SL120

Rating: 4.3

The German brand “Fubag” produces one of the most powerful pneumatic screwdrivers with a tightening torque of 120 Nm. The tool chuck is able to spin up to 12,000 rpm, significantly contributing to increased productivity. To connect the gun, you need a hose with an inner diameter of 9.5 mm, as well as a pressure of 6.3 atm. The manufacturer has implemented a fundamentally different scheme for starting the reverse rotation. The trigger is made in the form of a rocker arm and pressing on one side leads to clockwise rotation, and pressing on the other edge starts the twisting of the rig. The handle is fully rubberized and does not slip out of your hands. Excess air is removed through a second channel in the gun handle.

In reviews, buyers share that this air screwdriver is very helpful when working in a confined space due to the body length of 165 mm. Other models range in length from 190 to 250 mm. In addition to compactness and extreme power, the product is notable for the most affordable price among analogues, which makes it the best.

Advantages

• quick connection of the hose through the rapid fitting;
• rubberized handle;
• exhaust air outlet through the channel in the handle;
• short length 165 mm for tight spaces.

disadvantages

• very loud work;
• awkward trigger with reverse function.

Gross G208

Rating: 4.2

The review is completed by a pneumatic screwdriver from the Gross brand, which consumes 800 l / min with a pressure of 6.3 atm. For full operation with compressed air, you need a 1/4 inch fitting and a hose with an inner diameter of 9.5 mm. The gun has a ring for adjusting the torque to a maximum of 17 Nm. The set includes a rapid connection and a key. The air flow spins the blades of the pneumatic screwdriver up to 700 rpm. The reverse rocker switch, located to the left of the trigger, is handy for quickly changing direction of rotation. The rubber grip enhances the grip.

Our experts singled out the pneumatic screwdriver as the best in terms of the long-term readiness of the manufacturer to carry out free repairs during the warranty period. This period is the longest here and is 3 years, according to the firm's statement on the official website of the Gross-Tool company.

Advantages

• adjustable tightening torque;
• narrow cartridge shape;
• the handle is covered with rubber;
• convenient switch for reverse rotation.

disadvantages

• needs a large volume of air – 800 l / min;
• weighs 1.5 kg.

---

Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.