9 best pneumatic spray guns

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

You can paint bases, structures, details in different ways. But only a spray gun can provide perfect smoothness and uniformity of the paintwork. The most popular type in our country has become a pneumatic tool. It is convenient to operate and easy to maintain. Using a spray gun, you can paint walls and ceilings indoors, car bodies, decorative elements. The only negative point when using the air method of applying paints and varnishes (LKM) is the need to use personal protective equipment. In addition, a source of compressed air is required to operate. A wide range of pneumatic spray guns is presented in the Russian trade network. Our experts will help you choose a tool with the best combination of price and functionality. The rating is based on the analysis of spray gun data on the website https://rankquality.com/spray-guns/.

Selection recommendations

Spray types. Despite the same principle of operation, pneumatic spray guns differ in the type of spraying.

1. Back in the early 20th century, the HP (High pressure) system appeared. It involves supplying compressed air to the spray gun with a pressure of 2.5-6 atmospheres. Air consumption reaches 400 l / min. Experts consider a wide torch and fast work to the pluses. The downside of the system is the low percentage of paint transfer (up to 50%) and the tendency to fogging.
2. The HVLP system boasts a large percentage of delivery of paints and varnishes (up to 65%). The inlet pressure is 2.5 atmospheres; it is enough to supply 0.6-0.7 atmospheres to the nozzle. Due to the low flow rate, an excellent coating quality is achieved. The disadvantages of the system include sensitivity to the quality of compressed air.
3. At the lowest inlet pressure (1.4-2.0 atm.), Spray guns with the LVLP spray type can operate. A pressure of 0.6-1.2 atm is applied to the nozzle, which makes it possible to achieve the maximum delivery percentage (up to 70%). At the same time, the tool uses air economically (110-200 l / min). The main disadvantage of the system is its high price.

Compressor capabilities. When choosing a spray gun, it is important to take into account the technical characteristics of the compressor that will supply compressed air to the tool. Its power must exceed the productivity of the pneumatic spray gun by at least 20%.

Dimensions of the nozzle (nozzle). In order to properly apply the paint and varnish material to the surface to be painted, it is important to choose the correct nozzle diameter. Professional painters advise you to follow a simple algorithm. The higher the density of the paint and varnish material, the more the nozzle is placed.

1. It is possible to spray thick primers with a nozzle with a hole diameter of at least 2 mm.
2. It is best to apply base paints and varnishes with nozzles 1-1.4 mm in diameter.
3. Some spray guns have an adjustable nozzle diameter, which makes the tool versatile in use.

Additional options. For ease of use and to ensure a high quality coating, spray guns are equipped with a number of useful options.

1. High-quality spraying is achieved by adjusting the air supply and paintwork, the width and shape of the torch.
2. The connection of the spray gun to the hose is carried out using a threaded or quick-release connection. The choice depends on the frequency of connecting and disconnecting the spray gun.

We have selected 9 best air spray guns for review. You can buy the tool in specialized stores in the country. When allocating seats, the editorial board of the magazine relied on the opinion of the expert community, taking into account the reviews of Russian painters.

Rating of the best pneumatic spray guns

Nomination	a place	Name of product	price
Rating of the best pneumatic spray guns	1	Walcom Genesi Top Line S GEO 1.3 mm (933013)	RUB 32,332
	2	SATAjet 100 B F RP 1.6	18 169 RUB
	3	JONNESWAY JA-LVLP-2 5G	RUB 15 900
	4	Metabo FSP 600 LVLP	12 299 RUB
	5	HUBERTH LVLP R500 (1.4)	RUB 3,499
	6	CALIBER Paint sprayer KRP-1,3 / 0,5VB PROFI	RUB 5,079
	7	Wester FPG-30 Pro	RUB 3,289
	8	Fubag MAESTRO G600 / 1.3 LVMP	RUB 3,027
	9	VOYLET H-827 1.4 mm	RUB 2,013

Walcom Genesi Top Line S GEO 1.3 mm (933013)

Rating: 4.9

A pneumatic spray gun Walcom Genesi Top Line S GEO 1.3 mm allows you to get high-quality topcoats. The experts appreciated the patented dual spray technology. Uniform spray of paintwork material is ensured by a unique nozzle shape. Pre-spraying takes place in a special microchamber with 6 nozzles. In the second step, paint passes through the spray head. The manufacturer has provided for the possibility of adjusting the air pressure (flow rate up to 360 l / min) and the shape of the jet. The spray gun can work with a wide range of materials, from primer to varnish. The model ranks first in our review.

The spray gun is in high demand among auto painters. It is praised for its excellent paintwork quality.

Advantages

• high-quality assembly;
• even spray;
• torch and pressure adjustment;
• versatility.

disadvantages

• not found.

SATAjet 100 B F RP 1.6

Rating: 4.8

The SATAjet 100 B F RP 1.6 pneumatic gun was specially designed for applying a layer of primer and working with fillers. It is allowed to take materials based on water or organic solvents into work. Experts explain the high efficiency of the tool by a decent coefficient of material transfer (over 65%). In this case, the asset of the model should include the minimum polluting effect on the environment. Thanks to the QCC system, the painter can quickly change the tank. The RPS function allows you to work without an additional adapter. The pneumatic tool becomes the silver medalist of the review.

Users speak flatteringly about the convenience of adjusting the torch shape, soft trigger travel, and reliable grip. The disadvantages of the tool include a limited scope.

Advantages

• convenient setting;
• soft trigger;
• the tank changes quickly;
• secure grip.

disadvantages

• limited scope.

JONNESWAY JA-LVLP-2 5G

Rating: 4.7

The professional tool for applying varnish and paint is the JONNESWAY JA-LVLP-2 5G pneumatic spray gun. The experts highlighted several advantages of the model. The manufacturer has conveniently positioned the torch width and paint flow controls. Thanks to the ribbed surface of the handle and the soft trigger stroke, you can operate with one hand for a long time. The presence of a special hook on the body makes it easy to store the tool. The spray gun weighs 0.53 kg and is equipped with a 0.6 liter nylon tank. It is allowed to use a nozzle with a maximum diameter of 1.8 mm, the maximum air pressure is limited to 2 bar.

Domestic painters are satisfied with the ease of use, high-quality spray, and ease of settings. They have no complaints about the operation of the tool, except that not all materials can be poured into the tank.

Advantages

• convenient location of the regulators;
• soft trigger;
• light weight;
• high quality spray.

disadvantages

• for paint and varnish only.

Metabo FSP 600 LVLP

Rating: 4.7

The German spray gun Metabo FSP 600 LVLP is made of high-grade steel. It is designed for the application of varnishes and paints by air spraying. The manufacturer has equipped his product with a flame regulator, in operating mode it is recommended to set the pressure at 1.6 bar, (maximum pressure 3 bar). The tool weighs 0.7 kg and has a 0.6 l plastic tank located at the top. The set with the spray gun includes filter elements, a nozzle with a diameter of 1.3 mm, a cleaning brush and a mounting key. Experts consider the best combination of price and quality, which allows the tool to be used in different industries.

Russian consumers are still eyeing the German spray gun. The detachable rapid connection and high-quality assembly look attractive.

Advantages

• German quality;
• good equipment;
• convenient torch adjustment;
• detachable connection.

disadvantages

• no user reviews.

HUBERTH LVLP R500 (1.4)

Rating: 4.6

The minimum air consumption (85-110 l / min) is demonstrated by the HUBERTH LVLP R500 spray gun. The tool is designed for spraying varnishes and paints. Experts note soft and fine spraying, minimal formation of paint and varnish mist. The model is completed with a filter for a reservoir, an air cap, a needle, a brush and a universal wrench. The democratic price of the tool allows beginners to try their hand at painting. The asset of the model should include a simple adjustment of the torch shape, a soft trigger stroke, a reliable grip.

Many users have managed to appreciate the capabilities of the Chinese device. They consider the spray gun to be a good budget tool. There are complaints about the quality of the sealing elements, the problem is solved by replacing the gaskets.

Advantages

• soft thin spray;
• simple torch adjustment;
• soft trigger stroke;
• affordable price.

disadvantages

• short-lived gaskets.

CALIBER Paint sprayer KRP-1,3 / 0,5VB PROFI

Rating: 4.5

The TOP-6 of the best pneumatic spray guns is closed by the Russian development KALIBR Paint sprayer KRP-1,3 / 0,5VB PROFI. Experts appreciated the convenient torch shape adjustment by rotating the nozzle and the low trigger resistance. The strength and reliability of the tool is provided by a metal case, the bracket allows you to hang the product for storage. The maximum hole size is 1.6 mm, the manufacturer has provided the possibility of adjusting the nozzle diameter. There are also regulators for pressure and spray width. Using a spray gun, it is convenient to apply varnishes and paints, including metallic ones.

Professional painters note the good build quality, reliability and practicality of the tool. They include only a lot of weight as a disadvantage.

Advantages

• adjustment of the nozzle diameter;
• high-quality assembly;
• practicality;
• durability.

disadvantages

• great weight.

Wester FPG-30 Pro

Rating: 4.4

The Wester FPG-30 pro pneumatic spray gun is very popular among Russian consumers. The model has the most reviews on NM from the owners. Experts pay attention to several advantages of the product. First of all, the spray gun attracts with its versatility, the device allows you to paint ceilings, walls, cars. The 0.6 liter tank can be filled with primer, paints and varnishes. For the manufacture of the needle and nozzle, the Chinese manufacturer used stainless steel, so the critical unit is not subject to corrosion and micro damage. Low price remains an attractive factor.

Users have no particular comments on the tool. Someone is dissatisfied with the appearance, someone does not like ergonomics.

Advantages

• versatility;
• low price;
• economical air consumption (110 l / min);
• lightness (0.6 kg).

disadvantages

• the plastic gasket wears out quickly.

Fubag MAESTRO G600 / 1.3 LVMP

Rating: 4.3

The budget air spray gun Fubag MAESTRO G600 / 1.3 LVMP is designed for application of topcoats. It is recommended to pour paint or varnish into a 0.6 liter tank. The tool body is made of aluminum alloy, the manufacturer used galvanized chromium for corrosion protection. The nozzle and needle are made of stainless steel, experts note the high-quality processing and excellent fit of the parts. The spray gun has air, torch shape and material flow control. A high-quality paint spray requires an air pressure of up to 2.5 bar. The product weighs 0.88 kg, the maximum nozzle diameter is 1.3 mm.

Domestic users are satisfied with the quality of the spray, ease of use, durability, and a large number of adjustments. They consider a strongly swirling nozzle to be a minus.

Advantages

• affordable price;
• many adjustments;
• strength;
• ease of use.

disadvantages

• difficult to unscrew the nozzle.

VOYLET H-827 1.4 mm

Rating: 4.2

The VOYLET H-827 1.4 mm spray gun will be an excellent household tool in the garage or workshop. It is suitable for painting wood, metal, concrete, fabric and other surfaces. The experts liked the fine tuning of the nozzle, which creates the desired torch configuration. The 0.6 liter tank can be filled with primer, paint and varnish. The advantages of the tool include ease of use, low price, ease of maintenance. Smooth adjustment of the material flow allows you to economically use paint. With proper preparation of the paint and varnish material, a decent coating quality is obtained.

Russian consumers liked the spray gun for its low price, lightness, compactness and ease of maintenance. Of the shortcomings, tank leaks are noted.

Advantages

• low price;
• ease of maintenance;
• high-quality spray;
• smooth feed adjustment.

disadvantages

• paint leaks from the tank.

---

Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.