8 best gas and electric cutters

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Concrete cutters are a successful symbiosis of a grinder and a circular saw. These powerful tools are designed for cutting asphalt, concrete, brick, stone, metals and pipes. Until recently, it was possible to meet concrete cutters in the hands of road workers, rescuers or builders. Today, the price of gas cutters and electric cutters has become affordable for home craftsmen. With such a technique in hand, you can safely take on the laying of paving slabs or replacing the wiring in a panel or brick house. Recommendations of our experts will help you to choose the optimal concrete cutter in terms of technical parameters.

How to choose a gas cutter

Engine's type. All concrete cutters can be divided into two groups.

  1. The most popular are gas cutters. Equipment of this type is equipped with small gasoline engines. It is irreplaceable in professional activities, suitable for gas cutters and owners of private houses under construction.
  2. Electric cutters are equipped with electric motors. These can be products with a connection to a household network (220 V) or stand-alone devices with a built-in battery. This type of concrete cutter is typically used by DIYers for small jobs.

Cutting method. You can cut concrete, stone or brick both dry and wet.

  1. In the first case, a large amount of dust is generated and enters the tool body, shortening the service life. The dry method is suitable for cutting metals.
  2. To use wet cutting, the concrete cutter must be capable of supplying water to the work area. The water not only deposits the dust, but also cools the saw blade, extending its life.

Engine power. Depending on the goals set, the motor power is selected.

  1. In professional activities, when you have to constantly work with reinforced concrete or stone, gasoline equipment with a capacity of 5 liters or more is required. from. Gas cutters with a 4-5 liter engine do a good job with asphalt or brick. from.
  2. For home use, both gas cutters (from 4 hp) and electric cutters (from 2 kW) are suitable.

Cutting depth. The choice of concrete cutter also depends on the cutting depth. The tool should provide a cut about 10-20% more than required. For example, if you have to work with a concrete slab 150 mm thick, then it is better to purchase a tool with a maximum cutting depth of 170 mm.

Disc diameter. All concrete cutters are designed to use cutting discs of a certain size. The diameter of the circle is limited by a protective cover, which is necessary for safety reasons. In the professional sphere, discs with a diameter of 350-400 mm are used, in everyday life there are often enough cutting wheels with a size of 200-300 mm.

Air cleaning. Any concrete cutter generates a lot of dust, even when using the wet cutting method. Therefore, manufacturers install special air purification systems. The more filter elements are used in technology, the longer its service life. Even household appliances should have at least two filters (external and internal).

Vibration protection. Working with concrete or stone is accompanied by strong vibration, which is transmitted to the hands of the operator. When buying a gas cutter, it is important to pay attention to the presence of soft covers of the handle, vibration damping system and special shock absorbers.

We have selected the 8 best petrol and electric saws for review. Most of them are widely represented in Russian stores. When distributing positions in the rating, the opinion of the expert community and feedback from domestic users were taken into account.

Rating of the best petrol and electric cutters

Nomination a place Name of product price
The best gas cutters 1 Oleo-Mac 963 TTA-14 3000 W 4.1 HP 350 mm RUB 57,990
2 STIHL TS 800 5000 W 6.8 HP 400 mm RUB 84,490
3 Husqvarna K 970-14 6.44 HP 350 mm RUB 78,596
4 Wacker Neuson BTS 635s 4300 W 5.8 HP 350 mm RUB 75,000
5 Solo 880-12 4000 W 5.5 HP 300 mm RUB 39,000
6 Makita DPC7330 4200W 300mm RUB 40,486
The best electric cutters 1 Messer C14 2800 W 355 mm RUB 63,454
2 STIHL TSA 230 230 mm RUB 25,990

The best gas cutters

Gas cutters can handle the most difficult tasks during construction work. This technique is distinguished by its long operating time, autonomy and high performance. The experts appreciated the capabilities of the following units.

Oleo-Mac 963 TTA-14 3000 W 4.1 HP 350 mm

Rating: 4.9

Oleo-Mac 963 TTA-14 3000 W 4.1 HP  350 mm

The highest ratings in the reviews are given by domestic consumers to the Oleo-Mac 963 TTA-14 gas cutter. This model does not have a record power (4.1 HP), but it can work with a disc with a diameter of 350 mm. Experts note the excellent value for money, which allows the equipment to occupy the top construction site of the pedestal in our rating. The model has earned praise from experts for its ease of use. The manufacturer has successfully distributed the weight in the central part of the tool, so the hands do not get tired during prolonged work. And if you take into account the low weight (10.4 kg) and the anti-vibration system, then the gas cutter is also suitable for professional activities.

Users are satisfied with the quality of the tool, its performance and availability. Only use high quality gasoline.

Advantages

  • high-quality assembly;
  • affordable price;
  • ease of use;
  • light weight.

disadvantages

  • exactingness to the quality of gasoline.

STIHL TS 800 5000 W 6.8 HP 400 mm

Rating: 4.8

STIHL TS 800 5000 W 6.8 HP  400 mm

The STIHL TS 800 gas cutter is a heavy-duty high-performance equipment. The device is equipped with a 6.8 liter gasoline engine. with., the spindle speed reaches 9000 rpm. It is allowed to install a large cutting disc (400 mm) on the gas cutter, providing a cutting depth of 143 mm. The manufacturer took care of the operator's comfort by installing an anti-vibration system. This full-fledged professional tool ranks second in our ranking. It is inferior to the winner in cost and weight (12.7 kg).

Russian builders are satisfied with the performance and power of the German gas cutter, cutting depth, and ease of operation. The model is extremely reliable and unpretentious. The disadvantages of users include high price and high weight.

Advantages

  • high power;
  • large cutting disc;
  • resourcefulness;
  • reliability and durability.

disadvantages

  • high price;
  • great weight.

Husqvarna K 970-14 6.44 HP 350 mm

Rating: 4.7

Husqvarna K 970-14 6.44 HP  350 mm

The Swedish petrol saw Husqvarna K 970-14 is designed for heavy cutting of asphalt, stone or concrete. It is widely used in the construction and road sectors. The equipment is equipped with a powerful gasoline engine (6.44 hp), thanks to which it is possible to use large diameter cutting discs (350 mm). And although the model is inferior to its eternal competitor from Germany in these parameters, the Swedish device looks more preferable in terms of cost. The experts drew attention to the built-in SmartCarb auto-compensation system, which maintains power when the filter is dirty. This reduces fuel consumption.

Users have no complaints about the work of the gas cutter, they are satisfied with the power-to-weight ratio (11 kg). The model takes a prize in our rating.

Advantages

  • power and lightness;
  • autocompensation system;
  • wear resistance;
  • low vibration.

disadvantages

  • high price;
  • expensive maintenance.

Wacker Neuson BTS 635s 4300 W 5.8 HP 350 mm

Rating: 4.6

Wacker Neuson BTS 635s 4300 W 5.8 HP  350 mm

The experts had the most pleasant impressions after testing the Wacker Neuson BTS 635s petrol saw. The model is distinguished by simplicity and reliability, convenience and comfort in work. The manufacturer has equipped its product with a 5.8 liter gasoline engine. with., which allows the use of discs with a diameter of up to 350 mm. The cutting depth is limited to 122 mm. The robust case protects critical components from dust and moisture. A special trolley and a 20 liter water tank have been developed for the gas cutter. With this equipment, you can cut concrete or asphalt for a long time.

The model stops one step away from the pedestal of our rating, since the builders note the instability of the apparatus. The model copes with hard work with sharp reinforced concrete foundations.

Advantages

  • simplicity and reliability;
  • German quality;
  • durable body;
  • ease of use.

disadvantages

  • cuts reinforced concrete with difficulty.

Solo 880-12 4000 W 5.5 HP 300 mm

Rating: 4.5

Solo 880-12 4000 W 5.5 HP  300 mm

The German Solo 880-12 gas cutter was included in our rating for the optimal combination of price availability and functionality. The model does not have a high power (5.5 HP), so the maximum disc diameter is limited to 300 mm. The cutting depth is 125 mm. But the manufacturer installed an automatic engine start system, automated the process of mixing gasoline with oil, installed vibration cleaning of the air filter. The gas saw can be used for both dry and wet cutting of stone or concrete.

Users in reviews praise gasoline equipment for its lightness and accurate weight distribution. The availability of modern options makes work comfortable and worry-free. There are problems with heat dissipation, so it is necessary to take breaks more often.

Advantages

  • lightness (10.2 kg);
  • affordable price;
  • many useful options;
  • accurate weight distribution.

disadvantages

  • limited performance;
  • heats up quickly.

Makita DPC7330 4200W 300mm

Rating: 4.4

Makita DPC7330 4200W 300mm

The lightest petrol saw in our ranking is the Makita DPC7330. This compact and convenient motorcycle is equipped with a 5.7 liter engine. with., which allows the use of cutting wheels with a diameter of 300 mm (bore 20 mm). The cutting depth is limited to 97 mm. Experts have appreciated the five-stage air cleaning, thanks to which the tool has increased productivity. The protective cover is easily adjustable, making the operator's work safe.

Domestic builders liked the lightness and compactness of the model, the quick start of the engine, and the reasonable price. The gas cutter is of increased interest among potential buyers at YAM (3135 views of the product card in 2 months).

Advantages

  • affordable price;
  • lightness and compactness;
  • effective air purification;
  • safety.

disadvantages

  • shallow cutting depth.

The best electric cutters

For home craftsmen, electric cutters are becoming a good alternative to gasoline technology. These devices can be powered by a household network or an internal battery. They are affordable, but the scope of the power tool is limited. The specialists liked the work of several models.

Messer C14 2800 W 355 mm

Rating: 4.9

Messer C14 2800 W 355 mm

The Messer C14 electric concrete cutter has gained popularity among Russian professional builders due to its simplicity and high quality workmanship. With this tool you can cut brick and stone, asphalt and reinforced concrete. The manufacturer provides for both dry and wet cutting. Experts allocate high power (2.8 kW) and electronic motor overload protection for the model. With an integrated water supply system, the cooling of the disc can be controlled. Cut-off wheels can be installed with a diameter of up to 350 mm, and the cutting depth is 125 mm. Electric cutter wins our rating.

Users liked the high performance of the device, ergonomics and balance. It is a pity that it is rather difficult to buy the device, since it has been discontinued.

Advantages

  • high power;
  • deep cut;
  • overload protection;
  • ease of use.

disadvantages

  • rarely on sale.

STIHL TSA 230 230 mm

Rating: 4.7

STIHL TSA 230 230 mm

It's hard to compete with the STIHL TSA 230 cordless electric cutter with the winner of our rating in terms of power and performance. But in mobility and lightness (3.9 kg), the model will give a head start to many. The German manufacturer has provided the ability to operate the device with different batteries (voltage 36 V). Experts believe that the best option is to use the AP 300 battery. The maximum cutting disc diameter is limited to 230 mm, while the cutting depth is 70 mm. It is possible to connect the device to a water source in a matter of seconds due to a quick-release coupling.

Domestic users in reviews praise the tool for an affordable price, reliability, and maintainability even in the cold. The duration of the work alone is not sufficient for large construction operations.

Advantages

  • mobility and maneuverability;
  • ease;
  • affordable price;
  • stable work in frost.

disadvantages

  • limited opportunities.


Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment