Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.
A battery engraver can do a lot of useful work in everyday life and in a creative workshop. The device does not have high power, therefore the scope of application is limited to small workpieces. The device is able to cope not only with soft materials (wood, plastic), but also with different types of metals. If the master has the necessary equipment, the engraver can perform such operations as cutting, cleaning, grinding, milling, drilling. A rich assortment of battery dremels is presented on the domestic market. Recommendations of our experts will help you to choose the model that is optimal in terms of price and technical parameters.
- Selection recommendations
- Rating of the best cordless engravers
- Dremel 8220-5 / 65
- BOSCH GRO 12V-35 2.0Ah х2 L-BOXX
- Dremel 8220-1 / 5
- BOSCH GRO 12V-35 0 box
- Dremel 7750-10
- Milwaukee C12 RT-0
- Bort BCT-72Li
- Hammer AMD3.6
Disk rotation speed. For the engraver, one of the most important technical characteristics is the shaft speed. The larger this value is, the higher performance the device demonstrates. This parameter is selected taking into account the diameter of the tooling, which is recommended for use in the tool. The larger the diameter of the disc (circle), the less resourceful the engraver should be. A useful option would be to adjust the rotation speed. There are slide (smooth) and position switches.
Case or box. Since there is a lot of small equipment with the engraver, a case helps to ensure the safety of the entire set. It is best when there is an insert inside with special niches for each rig. In extreme cases, you can purchase the device in a cardboard box, but it will be difficult to exclude damage and breakage of the tool and accessories during transportation.
The weight of the engraver. An important role in long-term work with the tool is its mass. It is indicated in the assembled state with a standard battery. The most productive models weigh 0.5-0.7 kg, while compact household products weigh 0.25-0.40 kg.
Battery capacity and voltage. The operating time of the cordless engraver depends on the parameters of the battery such as capacity and voltage.
- The higher the battery capacity, the longer the device can operate without charging. However, with an increase in capacity, the mass of the battery usually grows, and therefore the entire dremel. A professional tool is often equipped with two batteries: one can be used in work, the other is recharged at this time.
- The duration of the engraver's work without recharging also depends on the battery voltage. When comparing two batteries with the same capacity, the working time will be higher for the model with the higher voltage.
Functionality. Modern functions help to improve comfort and safety during work, as well as durability of the tool.
- The speed stabilization system provides automatic maintenance of the set rotation speed of the tooling, regardless of the hardness of the material or the load on the tool.
- Overload protection allows you to neutralize the negative impact on the motor and gearbox when the equipment is jammed in the material.
- The engine brake saves operator time by instantly stopping the shaft from rotating. Without a brake, you will have to hold the engraver on the weight for some time after turning it off until the rotation of the rig stops completely.
We have selected 8 best cordless engravers for review. You can buy these models in the trade network of our country. When allocating seats, the editorial staff of the journal relied on the opinion of the expert community, taking into account the reviews of Russian users.
Rating of the best cordless engravers
|Nomination||a place||Name of product||price|
|Rating of the best cordless engravers||1||Dremel 8220-5 / 65||RUB 13 162|
|2||BOSCH GRO 12V-35 2.0Ah х2 L-BOXX||RUB 10,499|
|3||Dremel 8220-1 / 5||RUB 6 393|
|4||BOSCH GRO 12V-35 0 box||RUB 5 610|
|5||Dremel 7750-10||RUB 3,470|
|6||Milwaukee C12 RT-0||RUB 5,900|
|7||Bort BCT-72Li||RUB 1,910|
|8||Hammer AMD3.6||RUB 1,850|
Dremel 8220-5 / 65
The Dremel 8220-5 / 65 cordless engraver is an easy-to-use multi-tool. The experts appreciated the high speed of the shaft (30,000 rpm), the use of high-quality materials, and the absence of vibration. To work comfortably with different materials, the manufacturer has equipped its product with a speed regulation and stabilization system. The engraver is offered in different trim levels, the richest is the Platinum series. A spacious case, two batteries, a charger and 65 attachments should be included in the asset of the model. Dremel becomes the winner of our review.
Domestic users speak flatteringly about good assembly, rich equipment, wide functionality. The only drawback is the high price.
- ease of use;
- 2 batteries;
- rich equipment.
- high price.
BOSCH GRO 12V-35 2.0Ah х2 L-BOXX
The German company BOSCH never ceases to delight consumers with reliable and efficient electrical appliances. The engraver GRO 12V-35 2.0Ah x2 L-BOXX was no exception. A powerful 12-volt 2 Ah battery generates energy that spins the spindle up to 35,000 rpm. At the same time, experts pay attention to the rich equipment of the model. The power button can be locked, the rotation speed is easily adjustable, the motor is protected from overloads. Thanks to the fixing of the spindle, the tooling changes in a matter of seconds. The product weighs 0.6 kg, there is an L-BOXX case for carrying tools and accessories.
Despite the more attractive technical characteristics and price, the engraver is inferior to the winner of the review. Users notice a noticeable shaft runout at high revs.
- 2 batteries;
- rich equipment;
- convenient L-BOXX.
- shaft runout at high speed.
Dremel 8220-1 / 5
The Dremel 8220-1 / 5 cordless engraver can handle a wide range of jobs. The device is powered by a 12-volt 2 Ah battery. The experts liked the safety of the model, after releasing the button, the brake instantly stops the engine. There is a speed switch on the body, it is convenient to use it during operation. The EZ Twist chuck provides quick keyless tool changes. LED backlighting allows you to work comfortably even in poor visibility conditions. To reduce vibration, the handle is fitted with a soft rubber grip. It prevents the tool from sliding out during operation.
Russian users appreciate the engraver for its power and quality assembly. Of the minuses, they single out one battery and the absence of a case.
- high-quality assembly;
- ease of use;
- no case;
- there is no spare battery.
BOSCH GRO 12V-35 0 box
When choosing a straight grinder, you can save a lot if you give preference to the BOSCH GRO 12V-35 0 model. It is sold without a battery, case and attachments. The battery will fit from another brand tool, the operating voltage should be 12 V. The maximum shaft speed is 35,000 rpm, the manufacturer has provided for the spindle adjustment and the power button lock. The overload protection function helps to increase the durability of the engraver. The tool comes with a cutting disc, a wrench and a box. The device stops one step away from the prize pedestal.
Domestic consumers appreciated the power, backlighting, and good equipment. Some disadvantages of the model have also been identified. This is the appearance of howling and vibration at high speeds and poor equipment.
- rich equipment;
- affordable price.
- noise and vibration at high speeds;
- poor equipment.
The Dremel 7750-10 Engraver is a good option for a number of home tasks. Lightweight (0.42 kg) and compact device successfully combines affordable price, good performance (20,000 rpm) and comfortable shape. The manufacturer took care of cooling the engine by making ventilation holes on the case. Thanks to the innovative EZ Twist tip and collet lock, tool changes are keyless. It takes only 1 hour to restore the battery capacity (4.8 V, 1.5 Ah). The set includes 10 attachments, a charger and a polishing paste.
In reviews, the engraver is praised for its quiet operation, work until the battery is completely discharged, and efficient cooling. The disadvantages of users include a positional speed controller and modest power.
- lightness and compactness;
- affordable price;
- quiet work.
- positional speed controller;
- low power.
Milwaukee C12 RT-0
The Milwaukee C12 RT-0 cordless engraver can solve a wide range of tasks in everyday life. The device is suitable for processing metal, wood and plastic workpieces. The experts appreciated the compactness and the ability to work in hard-to-reach places. The spindle speed is adjustable in the range of 5000-32000 rpm, in the collet chuck, you can reliably fix equipment with a shank diameter of 0.8-3.2 mm. The battery is not included, but you can pick up a 12-volt battery from other brand devices. Despite the high quality workmanship, the engraver closes the TOP-6 of our review.
Domestic users are unhappy with the price given the poor package bundle. The model cannot boast of any modern functions, or a case, or equipment.
- high power;
- charge indicator;
- comfortable collet.
- poor equipment;
- no modern features.
The most affordable and lightweight (0.26 kg) engraver in our review was the Bort BCT-72Li model. The rechargeable machine develops up to 25,000 rpm, when operating at maximum, the battery sits down in about 30-40 minutes. The non-removable battery recovers its strength in about 3 hours. Experts praised the engraver for its high-quality assembly, reliability and ease of use. The speed mode is regulated by a position switch every 5000 rpm. A set of nozzles (20 pieces) and a charger are included with the tool. In the asset “baby” you can bring the illumination of the working area.
Domestic users speak flatteringly about the lightness, reliability and ease of use. The disadvantages of the engraver are low power, engine overheating under high load.
- lightness and compactness;
- low price;
- high-quality assembly.
- the motor heats up quickly;
- low power.
Hammer AMD3.6 engraver can be a great tool for a novice home craftsman. The cordless mini drill is suitable for cutting, grinding, engraving, drilling and deburring small workpieces. Experts were pleasantly surprised by the large number of accessories (118 pcs.) That come with the budget tool. The manufacturer did not skimp on the functional equipment. The engraver has a power button lock, rotation speed adjustment, spindle fixation. It develops the device up to 18000 rpm, it is powered by a 1.3 Ah (3.6 V) battery.
The last line in the review is explained by the low power, frequent triggering of the motor protection. But for jewelry work, the tool is the best option.
- rich equipment;
- speed control;
- low price.
- low power;
- overheating protection is often triggered.
Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.