7 best motor pumps

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Motor pumps are actively used in construction, industry, municipal services and in domestic conditions. It is autonomous an internal combustion engine device that capable of pumping from 135 to 1800 liters of fluid per minute, and with height difference from 6 to 70 m. We have prepared a rating of the best motor pump based on product characteristics as well as reviews owners or those who worked for them. Concrete and facts will help get an idea of ​​the best devices in various categories, and choose the most suitable for upcoming tasks.

Rating of the best motor pumps

Nomination a place Name of product price
The best motor pumps for clean water 1 Hitachi a160e 25 403 rub.
2 Hammer mtp4000 15 999 rub.
3 Champion Gp26-ii 6 800 rub.
The best motor pumps for moderate water 1 Fubag pg1800t 59 770 rub.
2 Champion Gtp80 19 100 rub.
The best motor pumps for heavily contaminated water 1 DDE PTR80K 35 355 rub.
2 Elitech MB 800 D 80 G 18 601 rub.

The best motor pumps for clean water

Motor pumps in the rating are divided into categories by ability let sand and debris pass through without damaging this impeller. Clean water equipment category calculated to pump fluid without cloudy sediment. Water quality should be at the tap level. Such motor pumps are used to filling or draining tanks, organizing an irrigation system, filling or pumping the pool in the yard.

Hitachi a160e

Rating: 4.9

Hitachi A160e

This item from the rating belongs to the Japanese corporation Hitachi, using a Honda engine in the design. Power four stroke the installation has a volume of 163 cm3 and consumes 0.8 gasoline per hour work. The grease is poured separately into a container of 0.6 l. Branch pipes are convenient to connect, and adapters are already included. ICE and the pump is enclosed in a sturdy square frame that performs a protective function. It’s convenient to carry equipment for it. Owners in reviews like the endurance of a Japanese motor that works even in frost -20 degrees for 12 hours without stopping.

Experts rated the model as one of the most productive. To do this, she has an outlet of 80 mm and a 5.5 hp engine pumping up to 1000 liters per minute. Motor pump able to pick up liquid from a depth of 8 m and feed it to a height of 32 m, which can even be used to extinguish high-altitude fires buildings.

Advantages

  • huge power 4000 W;
  • high productivity of 1000 l / min;
  • spacious fuel tank 3.6 l;
  • hardy Japanese engine Honda;
  • lifting height 32 m.

disadvantages

  • a fragile strainer is installed inside – it often breaks in winter.
  • Starts only with a manual starter;
  • plastic half nuts;
  • it is difficult to find a suitable hose for the outlet diameter 80 mm.

Hammer mtp4000

Rating: 4.8

Hammer Mtp4000

The motor-pump is placed in a strong frame on three levels of the base. All alloys are made of alloy metal and are joined in half a turn for quick connectivity. The motor has a volume of 196 cm3 and a power of 5.44 hp, therefore it is able to draw fluid from a depth of up to 8 m. The four-stroke unit runs on gasoline. Users mark in reduced vibration due to the presence in the design of rubber bushings inserted between the engine and the frame. Fence hole air carried up and ensures stable operation of the internal combustion engine. Air cooling helps prevent overheating. At the entrance to the air duct is fitted with a filter, as in a car, so that the trash got in.

The model entered the rating as the best for organizing irrigation on large garden plot. Its capacity is 600 l / min and the ability to raise head up to 25 m will help create an irrigation system from the dug tanks on the farm.

Advantages

  • the shoulder blades are not damaged even when stones hit (only rotation stops);
  • easy to select hoses for a diameter of 2 inches;
  • starts from the first jerk;
  • all metal connections.

disadvantages

  • weight 26.5 kg hard to bear;
  • consumption of almost 1000 ml of gasoline per hour;
  • oil filling point in the crankcase with a very narrow neck.

Champion Gp26-ii

Rating: 4.7

Champion Gp26-ii

The product in the rating is a product of a Russian company, but manufactured at production facilities in China. As power source and create torque applied power two-stroke unit with a volume of 32.6 cm3. Power the engine is 1.2 hp and the performance reaches 130 l / min In this case, the device will be able to capture liquid from a depth of 8 m and bring it to a level of 30 m. To connect the hoses, use branch pipes with a diameter of 25 mm. The motor pump is located on the H-shaped the base of the profile pipe, and the handle for transportation screwed to the top of the pump. Reviewers inform owners thanks to the gasoline pump, the equipment starts up easily.

Experts rated the pump as the lightest in the ranking. Weight 7.2 kg will not be a problem for transferring even to a weaker sex. Wherein compact baby will be able to fill or deflate the outdoor pool 6 m3 in one hour. The product is useful to owners of private houses with fountains or swimming areas in the yard.

Advantages

  • convenient to carry due to the low weight of 7.2 kg;
  • takes up little space during storage;
  • wide rubber pads reduce vibration and prevent movement of a motor-pump;
  • easy to buy impeller oil seal in case of leakage.

disadvantages

  • very small tank 0.7 l;
  • when atmospheric pressure fluctuates, the engine speed “floats”;
  • you need to mix oil and gasoline yourself;
  • no active air cooling.

The best motor pumps for moderate water

Motor-pumps for medium-contaminated liquids are designed for skipping through an impeller of particles of sand and debris from 10 to 25 mm in diameter. Such units are suitable for landscape designers involved in the creation of artificial ponds in the territory, as well as for pumping flooded basements, garages and cellars. You can also use them organize the supply of water for technical needs directly from the river or rate.

Fubag pg1800t

Rating: 4.9

Fubag Pg1800t

The model in the ranking belongs to the German brand and is equipped with engine F188. The unit delivers power of 9560 W, raising the pressure to a height of up to 26 m. The equipment is fixed in a tubular strong frame. Suction and discharge nozzles are located on one end parties, which simplifies the connection. The motor pump is able to continue impeller rotation with sediment and even small stones. If she clogged, then a convenient system for quick disassembly of the pump is provided to clean up what I like in the reviews of those who worked on it. The huge 6.5 liter tank does not require frequent refueling.

In the category of pumps for slightly polluted water, this is the most productive device. It is equipped with huge pipes with with a diameter of 100 mm and a power of 13 hp, which ensures pumping up to 1800 liters in one minute. The motor pump is ideal for enterprises on which require the injection or drainage of huge tanks, wagons and car tanks.

Advantages

  • extension screws are provided for quick disassembly of the pump and blade cleaning;
  • there is a technical channel for removing sludge from the chamber with impeller;
  • all connections are metal;
  • spacious tank of 6.5 l, contributing to long-term operation;
  • Uninterruptedly functioning, passing garbage in the sizes 25х25 mm

disadvantages

  • it is difficult to find hoses with a cross section of 100 mm;
  • the huge weight of 70 kg complicates the transportation;
  • loud engine noise;
  • manual starter.

Champion Gtp80

Rating: 4.8

Champion Gtp80

The model ranks second in the ranking category among devices for slightly polluted water, since it is slightly inferior in the performance of the previous motor pump is 1300 l / min, against 1800. But it is easier to equip it with hoses with an output diameter of 75 mm. The motor pump is designed to draw fluid from a depth of 8 m and remove head to a height of 26 m vertically. Four stroke engine unpretentious in maintenance, and it’s convenient to fill gasoline through a wide neckline. But there are no rubber bushings on the unit, so put it preferably on a soft base so that it does not shake much vibrations.

Users in the reviews note that if the candle is coked, then it’s easy to choose a new one – the same candles are suitable for this motor pump, as on VAZ cars. But the frame is estimated as weak for weight 43 kg, therefore, with regular transportation, it is advised to strengthen seams by re-welding. Our experts recommend a product in the ranking for watering fields located near a reservoir (river, lake, bids). The motor-pump easily transfers a large volume, having fed it to horizontal distance up to 300 m.

Advantages

  • power 7 hp;
  • fuel tank 3.3 l;
  • good maintainability – easy to get parts oil seals;
  • quick disassembly of the pump chamber for cleaning.

disadvantages

  • wires are loose attached to the housing – they can be accidentally tear off;
  • weight of 43 kg makes it difficult to transfer the motor pump to the place operation;
  • “gluttonous” – consumption of gasoline 1.2 l per hour;
  • oil change is required twice as often as indicated.

The best motor pumps for heavily contaminated water

Products in this rating category are designed to pass stones in pump chamber with dimensions up to 40×40 mm. This allows you to apply motor pumps during construction or for clearing underground channels, technical mines, as well as for pumping water with sludge after flooding. The cost of motor pumps of this category is more expensive, but the price is justified performance and reliability in environments where other the equipment does not cope.

DDE PTR80K

Rating: 4.9

DDE PTR80K

This product from the rating belongs to the American manufacturer, characterized by high build quality. Motor pump is capable pump liquids with mechanical impurities due to increased channels in the pump chamber. ICE has a volume of 270 cm3 and gives out power 9 h.p. This allows up to 1000 l / min. Complete to motor pump manufacturer attached a candle key, a set of filters and branch pipes, as well as detailed instructions. The engine is mounted on trapezoidal coasters associated with the frame rubber thick vibration damping pads. Cleaning chamber disassembled less in less than 30 seconds thanks to four thick screws.

Our experts added a motor pump to the rating of the best for pumping dirty water from excavation pits at a construction site. Particle pass 28×28 mm not will quickly clog the chamber or damage the impeller blades. IN reviews of the master report an easy pumping of liquid with sand, clay and garbage, which confirms the suitability for harsh construction conditions.

Advantages

  • good head with a productivity of 1000 l / min;
  • water removal to a height of up to 30 m;
  • capacious fuel tank of 6 l;
  • 1.1 L oil tank for less time for service.

disadvantages

  • loud work;
  • plastic fittings;
  • harder to find spark plugs to replace;
  • weight 63 kg.

Elitech MB 800 D 80 G

Rating: 4.7

Elitech MB 800 D 80 G

This is another domestic product from the ranking, possessing 196 cm3 gasoline engine and 6.5 hp The unit sucks from a depth of 6 m and carries the flow to 30 m high. The four-stroke ICE has a separate supply of gasoline from tank 3.6 l and oil, for which there is a capacity of 0.6 l. Power up installation from a manual starter with a cable at the rear engine compartment. Connection is via metal branch pipes with a diameter of 80 mm.

According to our experts, this motor pump from the rating is the best for utilities. This is facilitated by: bandwidth capacity 800 l / min, battery life at one gas station up to 2.5 hours, as well as an affordable price that has no analogues in the category rating. With the help of this motor pump, you can quickly drain the basements and technical wells for workers access to repair communications.

Advantages

  • low cost;
  • admission of sand and stones with dimensions up to 25×25 mm;
  • cheap components;
  • lifting height 30 m.

disadvantages

  • it’s more difficult to choose equipment for 80 mm nozzles;
  • no anti-vibration inserts;
  • loud work;
  • weight 36 kg.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply