Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.
Soldering lamps are widely used in various construction and installation processes, and are always useful on the farm. With their help, you can warm up the oil in the crankcase of a car when there is severe frost outside -25 … -35 degrees. Others are suitable for annealing rusty carvings, removing old paint, firing bristles on pork carcasses, tin soldering, and heat shrinking insulation. Soldering torches are also used for roofing work to warm up bitumen on roofing felt. Let's figure out how to choose such a device for household needs and which models are most popular with buyers and experts.
- How to choose a blowtorch
- Rating of the best blowtorches
- The best gas blowtorches
- DREMEL VERSAFLAME 2200-4
- Advantages
- disadvantages
- KEMPER 1060 pz
- Advantages
- disadvantages
- EXPRESS 8700
- Advantages
- disadvantages
- WESTER GG02
- Advantages
- disadvantages
- The best gasoline blowtorches
- SIBRTECH 91442
- Advantages
- disadvantages
- BARS 91452
- Advantages
- disadvantages
- SPARTA 91443
- Advantages
- disadvantages
How to choose a blowtorch
If you need a blowtorch, then pay attention to the following parameters when choosing:
- Flame temperature. The torch of the burner can have a temperature of 1100-2000 degrees, which affects the heating rate and what materials the lamp can melt.
- Ignition type. Models with piezo ignition are more convenient and safer as they are started by pressing one button. Otherwise, you will have to set fire to the flame with matches or a hand lighter.
- Weight and dimensions. The weight of a blowtorch varies from 200 g to 3 kg. Equipment sizes also vary. Consider this when working in a confined space, such as in the engine compartment of a car or a ventilation pipe.
- Burning time. On one refueling, the lamp can burn from 20 to 180 minutes. The higher the indicator, the longer it will be possible to work without distractions for refueling or changing the cartridge.
- Equipment. Soldering irons can be equipped with extensions and nozzles with different diameters, which expands their soldering capabilities. The presence of a suitcase simplifies the issue of transportation and storage.
Blow lamps are available in gas and gasoline (kerosene). They differ structurally and in size. It is in these two categories that our review is divided.
Rating of the best blowtorches
Nomination | a place | Name of product | price |
The best gas blowtorches | 1 | DREMEL VERSAFLAME 2200-4 | RUB 2,997 |
2 | KEMPER 1060 pz | RUB 2,761 | |
3 | EXPRESS 8700 | RUB 1,688 | |
4 | WESTER GG02 | RUB 1,099 | |
The best gasoline blowtorches | 1 | SIBRTECH 91442 | RUB 1,013 |
2 | BARS 91452 | RUB 1,528 | |
3 | SPARTA 91443 | RUB 1,137 |
The best gas blowtorches
Gas blowtorches have cartridges that are attached to a reducer with a nozzle. From the cartridges, liquefied gas (propane-butane) is supplied under pressure to the nozzle and ignited. These are compact models that are easy to handle in tight spaces. If necessary, the lamp can be disassembled, which increases the convenience of transportation and safety. Gas soldering irons are also practical because they are immediately ready for use after connecting the cylinder.
DREMEL VERSAFLAME 2200-4
Rating: 4.9
The first place comes from the American brand Dremel. The gas lamp is produced with its own non-removable cylinder, which provides for gas filling from below through the fitting. The end is closed with a plastic stand, which ensures a secure positioning of the device on the table. The lamp has a piezo ignition with a button that does not require a hold. The model weighs only 227 g and is very easy to manipulate. The curved nozzle provides a slightly upward slope of the flame. The butane-fueled soldering station works and the torch temperature reaches 1200 degrees. The length of the flame can be adjusted with a wheel on the side.
This blowtorch is the best in the package. It comes with a regular nozzle, a flame extension nozzle, a blue tip nozzle, a box for storing small parts and flux, a suitcase for transportation. There is also an insert with a catalyst that improves fuel combustion. If you need a gas-powered soldering iron with ample opportunities, then this is the best option.
Advantages
- no need to keep the button pressed;
- piezo ignition;
- stable base;
- a tube with a catalyst.
disadvantages
- sold not filled;
- does not work in the cold;
- does not turn on the first time;
- sprays a little gas when refueling.
KEMPER 1060 pz
Rating: 4.8
In second place is a soldering device from the Italian brand Kemper. The lamp weighs 570 g and consists of the burner itself and the attached cylinder. Convenience is that the lamp does not need to be refilled – when the gas runs out, you need to disconnect the empty bottle and connect a new one. For an hour of operation, the burner burns 110 g, so a 400 g capacity is enough for almost 4 hours. The reservoir is threaded and does not come loose. The cylinder has its own valve, which increases the safety of operation and transportation. The torch and cartridge can be separated for storage. Igniting the flame in the lamp with a piezoelectric element simplifies getting started. A wheel on the handle allows you to adjust the torch length. Users in reviews praise the soldering torch for its ergonomic grip.
This model is the best in terms of heating temperature, which reaches 1900 ° C. This allows you to melt not only copper and brass, but also steel. Another distinctive feature of the lamp is the permitted operating temperature of -17 degrees, at which other soldering units simply freeze.
Advantages
- piezo ignition of the flame;
- torch length adjustment;
- parts of the lamp can be stored separately;
- no need to refill the cylinder.
disadvantages
- without case;
- high price.
EXPRESS 8700
Rating: 4.7
If you need an even more powerful heat source, then take a look at the Express blowtorch. It runs on liquefied propane-butane with a flow rate of 110 g / h and is capable of pumping a torch temperature of 2010º C. There is a 190 g cartridge inside the mini soldering station, which is enough for 1.5 hours of continuous burning. A flame force regulator is provided in the upper part of the body. In the reviews, the owners praise the metal nozzle, which will last more than one year with regular use.
This lamp features a separate handle for increased grip comfort. In most competitors, the operator holds the soldering torch by the gas tank itself, and here is an ergonomic handle with a stop stop at the end. Another feature of the product is the protective design of the fuel container. The cartridge is housed inside a metal casing so it is not exposed to sunlight or heat from other heat sources. The steel double shell protects the vessel from mechanical damage, so we recommend the lamp for the most severe operating conditions.
Advantages
- convenient top regulator;
- hardy nozzle;
- high strength construction;
- easy to manipulate with long-term hold.
disadvantages
- enough for only 1.5 hours;
- larger than other soldering devices, so it is not suitable everywhere in a limited space.
WESTER GG02
Rating: 4.6
Completing this category is a refillable propane-butane blowtorch. The fire is ignited by a piezoelectric element by pressing a button in front. The torch length can be adjusted by turning the wheel at the end. The lamp has a small rectangular base, which serves as both a stand for two-handed operation and a stopper that prevents the soldering iron from falling out of hands. The lamp reservoir holds 17 g of gas. In the reviews, the owners are pleased with the presence of a safety switch that will not allow the flame to ignite spontaneously if you accidentally press the button in your pocket. This increases the safety of operation and allows the soldering machine to be worn simply in work clothes.
This soldering torch is perfect for an electrician to heat insulated wires. The lamp fits in the hand and does not protrude beyond its dimensions. Due to its small size, such a soldering “lighter” can be easily pushed into the panel door.
Advantages
- light ignition of the flame;
- can be bought in any city;
- stable base;
- torch length and temperature regulator.
disadvantages
- shipped unfilled;
- enough for 10-15 minutes of work.
The best gasoline blowtorches
Kerosene lamps can run on gasoline or aircraft fuel. They have a metal tank where fuel is supplied. After the pump is screwed in, pressure builds up on the side. When everything is ready, the petrol jet opens and the flame is ignited. The pressure can be controlled by the built-in pressure gauge or the sound of combustion. They are more reliable machines suitable for large jobs, but they take up more space and are heavier.
SIBRTECH 91442
Rating: 4.9
In this category, the first place is a blowtorch from the domestic brand “Sibrtech”. The gasoline plant is capable of heating objects up to 1450 degrees and consumes 900 g of fuel per hour. The soldering torch is located on a 1.5 liter tank. This supply is enough for 90 minutes of work. There is a pre-ignition tray under the nozzle. The user opens the tap and gasoline begins to drip there, which must be ignited with a match. After that, the feed is increased and a powerful torch is obtained. Gasoline is filled through a single neck with a pump, so first you need to get the rod with the cylinder. On the back, there is a knob with reliefs, which is convenient to twist even with work gloves.
This model got into the review of the best as the most “unkillable”. It is used on construction sites and in workshops, where it withstands falls, bumps, low-quality gasoline and frosts with dignity. If you need a blowtorch with a high resource, then pay attention to this product.
Advantages
- heats well;
- not whimsical in operation;
- tray for safe pre-ignition;
- volumetric handle.
disadvantages
- the black paint on the burner swells from heat;
- there is a little air coming from the closed supply valve;
- the filler neck is integrated with the screw-in place of the pump.
BARS 91452
Rating: 4.8
The second domestic brand “BARS” produces blowtorches with a 2 liter reservoir, which will be enough for almost 2 hours of continuous operation. The model has a robust steel body and is powder coated to prevent corrosion. The lamp weighs 1.7 kg without fuel. Refueling, as with the previous burner, takes place through the pump connection. Its neck has a steel butterfly stop to make it easier to unscrew the lid. The handle is closed so that no water can collect in it. Owners in the reviews like the plastic cap that turns the handle into a small compartment for storing small things.
The blowtorch is recognized by the experts as one of the best for its preheating system. Here, gasoline vapors pass through the hot jacket before entering the nozzle pipe. This raises their temperature and promotes even greater pressure and volatility. As a result, the stability of the combustion of the flame increases, which is confirmed by buyers in the reviews. If you need an even torch or have to work in the wind in cold conditions, then this lamp is the best option.
Advantages
- relatively small dimensions 270x160x290 mm;
- weighs 1.7 kg;
- voluminous handle makes it easier to hold;
- high quality painted body.
disadvantages
- sloppy welding seams;
- filling through the pump attachment point.
SPARTA 91443
Rating: 4.7
The product from SPARTA rounds off the category of gasoline lamps. The soldering machine has a 1.5 liter tank. The fuel consumption is 900 g / h. The burner weighs 2 kg. The closed handle prevents water from collecting in it, therefore it stays without corrosion longer. The pump throat is offset to the side wall (on top of competitors), which makes the nozzle more compact for pushing into tight spaces. The temperature of the fire can rise to 1100 degrees. Judging by the reviews, the narrowed shape of the nozzle makes the torch sharper, so heating can be done more accurately. Customers also praise the product for quick ignition and warming up. The soldering torch is actively used for waterproofing roofs and heating liquids.
In our opinion, this gasoline soldering lamp is the best in terms of safety. For ignition, competitors use an open tray where gasoline is dripping and it must be set on fire with a match. Here, the fuel pre-supply chamber is closed and has only a small hole for the entry of a match. This protects the operator from splashes and increases operational safety.
Advantages
- closed version of the handle;
- there is a torch level regulator;
- the embossed swivel wheel is easier to turn when wearing work gloves;
- tapered nozzle lengthens the torch.
disadvantages
- no preheating;
- tight valve;
- some have it crooked;
- it is difficult to buy a repair kit for the pump
Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.