6 best industrial heat guns

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Modern managers of enterprises and organizations devote close attention to the issue of a comfortable indoor microclimate. The regulatory framework (SanPiN indicates the permissible temperature ranges (13-28C), which must be maintained in work area. Industrial heaters are becoming a serious helper guns. With their help, you can quickly increase the air temperature or ventilate the room. On the domestic market its products offer both Russian and foreign manufacturers. Potential buyers will help determine the choice recommendations of our experts.

Recommendations for choosing a heat gun

Types of energy. All heat guns can be divided into several groups according to the type of energy used. Regardless principle of operation, all models require electrical energy to a fan.

  1. Diesel heat guns burn diesel fuel to produce heat. They have high power and performance.
  2. Gas models can run on natural or liquefied gas. If the company has a main gas (methane), then it is more profitable purchase a natural gas-fired heat generator. Liquefied fuel (in cylinders) can be of different types (propane, butane, their mixture), the choice is determined by the air temperature in the gun’s operating area.
  3. Electric models are powered by a three-phase network, they are not require additional energy sources, comparing favorably environmental friendliness and safety.
  4. Universal heat guns can work on diesel fuel or gas. This requires the purchase and installation of a suitable burner.

Thermal power. The heating power is considered one of determining parameters when choosing an industrial gun. This quantity It is selected taking into account the area of ​​the heated room. Calculation It looks simple: 100 watts of heat energy is required for heating area of ​​1 square. m. You should pay attention to the fact that electrical models there is still such a value as consumed power. It summarizes the power of the heater and fan. Higher thermal power, the larger the room will be able to warm device.

Installation method. For industrial installation heat generators used two methods.

  1. Stationary units are most often connected to trunk pipelines through which gas or electricity is supplied. They have high performance, and heat is distributed only in one room.
  2. Mobile devices are compact and smaller weight. Manufacturers equip such guns with wheels and a handle for ease of moving. Although some models are inferior to stationary heat generators in productivity, but with the help of one A mobile unit can heat several rooms.

We selected 6 of the best industrial heat guns in the review. They implemented in the trading network of our country. When allocating seats the editorial staff of the magazine relied on the opinion of the expert community, given the reviews of Russian consumers.

Rating of the best industrial heat guns

Nomination a place Name of product price
Rating of the best industrial heat guns 1 Master BV 690 FT (220 kW) 424 400 rub.
2 Ballu Biemmedue Jumbo 235T (400V-3-50 / 60 Hz) 453 180 rub.
3 Teplomash KEV-100T20E (100 kW) 49 770 rub.
4 Ballu Biemmedue SP 150 Metano 545 220 rub.
5 Alvin EK-42P (42 kW) 18 592 rub.
6 Master RS ​​40 (40 kW) 90 000 rub.

Master BV 690 FT (220 kW)

Rating: 4.9

Master BV 690 FT

Diesel fuel required Master industrial heat gun BV 690 FT to provide a comfortable microclimate in production hall, warehouse or hangar. The model wins in our review thanks to high power (220 kW) and performance (12500 cubic m / h), moisture-proof housing and lack of smell. The manufacturer equipped the unit with a thermostat with the possibility of manual restart, electronic flame stabilization system, camera stainless steel combustion. So that diesel fuel does not freeze in the cold, there is a fuel heater. Experts liked mobility installation, it comes with a handle for moving and wheels.

Users praised the performance of the gun, efficient removal of combustion products, preliminary system heating diesel fuel.


  • high performance;
  • effective gas removal;
  • summer mode (ventilation);
  • mobility.


  • high price.

Ballu Biemmedue Jumbo 235T (400V-3-50 / 60 Hz)

Rating: 4.8

Ballu Biemmedue Jumbo 235T (400V-3-50 / 60 Hz)

The universality of hydrocarbon consumption stands out Italian gun Ballu Biemmedue Jumbo 235T. She can successfully turn both diesel fuel and blue fuel into heat. However burners will have to be ordered separately, they are not included. Experts noted reinforced inner frame, improved soundproofing, built-in automation. The design is heated combustion chambers, restrictive and safety thermostat. The device is capable of operating in extreme climatic conditions. (to -40 ° C).

Users use a heat generator to dry and heat premises, maintaining the necessary pressure in the network. Disadvantages owners charge high price and expensive service.


  • high performance;
  • universality of fuel use;
  • rich equipment;
  • robust construction.


  • high price;
  • No adapters and burner included.

Teplomash KEV-100T20E (100 kW)

Rating: 4.7


Electric energy is used by the heat gun Teplomash KEV-100T20E. This industrial heat generator is easy to manage and maintenance. Domestic manufacturer installed a powerful heater; providing thermal power of 100 kW and maximum air exchange up to 6000 cubic meters. m / h The gun is designed for heating, as production shops, so housing stock and offices. It allows you to maintain indoor temperature in the range +5 … + 40 ° С. If the unit deviates from its working position, automation turns off the product.

Russian consumers appreciate the electric gun for environmental friendliness, quiet operation, good performance. By cons they include stationarity and high power consumption.


  • environmental friendliness;
  • ease of management and maintenance;
  • affordable price;
  • safety.


  • stationary installation;
  • high power consumption.

Ballu Biemmedue SP 150 Metano

Rating: 4.7

Ballu Biemmedue SP 150 Metano

Ballu gas gun has all the modern features. Biemmedue SP 150 Metano. Already from the name it becomes clear that in Methane (natural gas) is used as fuel. Installation mounted permanently in buildings where main gas is supplied. In addition, the unit requires a three-phase connection power networks. Experts praised the benefits of the model, such as combustion chamber preheating, stabilization system flame option ventilation, dual thermostat with manual override launch. The area of ​​the room in which the Italian is mounted gun, can reach 1740 square meters. m

Since the model is a leader in terms of cost, then There are still few buyers in our country.


  • high power
  • ventilation function;
  • electronic flame stabilization system;
  • high efficiency.


  • limited scope;
  • high price.

Alvin EK-42P (42 kW)

Rating: 4.6


The most affordable price in our review is electric heat gun Alvin EK-42P. It produces 42 kW of thermal energy with with a productivity of 2100 cubic m / h The manufacturer has relied on simplicity and reliability of the design. Experts note light weight heat generator (35 kg), which makes it a mobile source of heat. For operation, the device will need a power supply network (380 V), power is regulated by a manual switch. Model equipped with options such as auto-purge and air stabilization flow.

In reviews, Russian development is praised for an affordable price, fast heating of the room, stepwise adjustment of power. TO disadvantages they include difficulties with connecting and lack of electric cable kit.


  • low price;
  • step power adjustment;
  • fast heating;
  • mobility.


  • complex connection;
  • no power cord.

Master RS ​​40 (40 kW)

Rating: 4.5

Master RS ​​40 (40 kW)

Thermal can become a powerful source of heat in any room gun Master RS ​​40. The electric heat generator is equipped with a powerful a heating element that requires three-phase power current with a voltage of 380/400 V. The manufacturer equipped his product high wheels and an ergonomic handle for easy handling unit weighing 46 kg. The gun has a thermal power of 40 kW, maximum air exchange is 3100 cubic meters. m / h Overheating the device switches itself off, and maintain the set temperature allows thermostat. In the summer heat you can use device as a powerful fan.

Owners like the gun for environmental friendliness, multifunctionality, safety and durability. Model closes the TOP-6 for a modest heat output and high price.


  • mobility;
  • environmental friendliness;
  • safety;
  • ventilation option.


  • limited power;
  • high price.

Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment