5 best glass insulators

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

A popular material for roofing is glass. This web roll has a flexible fiberglass backing or fiberglass, which makes the work simple and convenient. Base on both of the parties is covered with a special astringent based on bitumen, therefore, when bending, the roof does not crack, maintaining water resistant. To prevent the layers from sticking together during storage, the bottom the part is protected by a polymer film, it melts easily when heating up. As a topcoat can be used special lining or topping. Choose the appropriate glass insulation not will be difficult if you heed the recommendations of our experts.

How to choose glassisol

Destination. Stekloizol finds wide application in construction. For different designs, a canvas with certain properties.

  1. When it comes to waterproofing a foundation, floor, or the device of the intermediate layer in the roofing cake, you can use available types of glassisol with the designation of HPP. Lining improves heat and noise insulation design, improves water resistance.
  2. CCI products have a more solid foundation. This the material can also be used for waterproofing the foundation and overlap. In addition, it is perfect for the device inexpensive roofing of a garage or barn, which rarely someone is walking.
  3. They are characterized by maximum resistance to mechanical stress. rolled materials with the designation HKP and TKP. To achieve wear resistance and durability, manufacturers succeed due to sprinkle the top with crushed granite or slate. Appointment of such a canvas is the top (top) layer of the roof.

The basis. In the marking, the first letter indicates the type the basics.

  1. Fiberglass (X) allows you to get an inexpensive roll product, which is used in cases where it is not constant high load. Stekloizol on this basis is applied for waterproofing the foundation and floors. In the roofing cake he takes the place of the lining.
  2. Fiberglass (T) is highly durable. Stekloizol with with such markings is able to withstand frequent walking of people in the roof. Therefore, its scope is the formation of the upper layer roofing.

Density. Stekloizol differs in thickness, and how consequence, density (kg / sq. m). The higher the density, the better insulating properties of the material. But this increases the load on the building structure. The thickness ranges from 2-5 mm. Thin material (2-3 mm) is suitable as a lining, and for it is better to give preference to a coating with a thickness of 3-4.5 mm

We selected 5 best glass insulators for review. In distribution places in the ranking took into account the opinion of the expert community and reviews consumers.

Rating of the best glass insulation

Nomination a place Name of product price
The best glass insulation 1 Technonikol HPP 3.0 1×10 m 530 rub
2 Plywood – HPP-2 mm 541 rub
The best glass insulation CCI 1 TechnoNIKOL TPP-3.0 10×1 m 1 277 rub.
The best glass insulation HKP and TKP 1 Tekhnonikol Tekhnoelast TKP slate gray 10×1 m 2 540 rub.
2 KhKP-350 top layer basis fiberglass 9 m2 461 rub

The best glass insulation

The most affordable variety of glass isol is the HPP brand. Its basis is fiberglass (X), located on top lining layer (P), and on the bottom surface polymer is glued film (P). The material is intended to be used as the intermediate layer between the base and the upper roofing coated. Experts praised the properties of the following materials.

Technonikol HPP 3.0 1×10 m

Rating: 4.9

TechnoNIKOL Stekloizol HPP 3.0 1x10 m

Completely waterproof lining material is Technonikol Stekloizol KhPP 3.0 1×10 m. Experts consider this a rolled product is the best option for a tile underlay. The manufacturer offers several varieties of HPP, which differ in thickness. The basis of the product is fiberglass, which impregnated on both sides with bitumen. Material can be used for waterproofing devices for above-ground and underground structures, as well as as a finishing roofing (provided there is no load). The product becomes a winner in our ranking.

Domestic roofers praise TechnoNIKOL HPP. They highlight benefits such as durability, reliability and high quality workmanship. By cons, users include only a lot of weight.

Advantages

  • high quality;
  • durability;
  • strength;
  • affordable price.

disadvantages

  • a lot of weight.

Plywood – HPP-2 mm

Rating: 4.8

Plexiglas - Stekloizol HPP-2 mm

A very effective way to waterproof slabs overlapping is the use of glassizol Orgkrovlya HPP-2 mm. TO the advantages of the material experts attribute good sound and thermal insulation, which is especially important at the junction of the heated and unheated tier. It is ideal for lightweight designs, because the density is 2.1 kg / sq. m. As basics manufacturer used fiberglass that is not subject decay and decay. For high flexibility, affordable price and long lifetime waterproofing rolls falls into our rating.

Professional builders note ease of use, good Adhering to the base, low thermal conductivity. But with negative temperatures (below -15 ° C) the bitumen filler may crack.

Advantages

  • simplicity of laying;
  • full water tightness;
  • a light weight;
  • low thermal conductivity.

disadvantages

  • cracking in severe frost.

The best glass insulation CCI

Glass roofing is considered a full-fledged roofing material with CCI designation. The base is made of fiberglass (T) with lining (P) and film (P) coating. It is highly durable, that allows you to use as the top of the roof with condition of rare walking on it. Professionals liked one thing rolled web.

TechnoNIKOL Stekloizol TPP-3.0 10×1 m

Rating: 4.8

TechnoNIKOL Stekloizol TPP-3.0 10x1 m

For the installation of a roof on outbuildings or garages suitable stekloizol Technonikol TPP-3,0. The material withstands high load, it is sometimes allowed to walk on it. Therefore, the manufacturer recommends applying the canvas on concrete or metal constructions with a slight slope and without it. Experts note decent breaking load (400-500 N), resistance to high (up to + 80 ° С) and low (-40 ° С) temperature, possibility of deposition on vertical bases. Even when formed on a flat surface puddles, full water resistance is maintained. Product becomes winner of our ranking.

For roofers, positive emotions evoke such qualities goods, such as ease of laying on mastic, installation up to -15 ° C, ease cutting, flexibility. By cons include the high price.

Advantages

  • stored without gluing layers;
  • elasticity;
  • resistance to biodefeat;
  • simplicity in laying.

disadvantages

  • high price.

The best glass insulation HKP and TKP

On the basis of fiberglass (X) or fiberglass (T) are created rolled materials for the device of the upper layer of the roof. From above coarse topping (K) is applied, providing resistance to mechanical stress. The lower part has a film (P) surface that melts when heated. Builders most often use the following models of glass.

Tekhnonikol Tekhnoelast TKP slate gray 10×1 m

Rating: 4.7

Tekhnonikol Tekhnoelast TKP slate gray 10x1 m

In all climatic regions of Russia it is allowed to use stekloizol Tekhnonikol Tekhnoelast TKP. Roofing material differs in the increased reliability that allows to mount continuous coatings on roofs of buildings or create airtight waterproofing the foundation. As a basis, the manufacturer used reinforced fiberglass. Sprinkled on top of the canvas slate, and the bottom surface is covered with an indicator film. At glass thickness of 4.2 mm, weight 1 square. m flexible roof is 5 kg For high strength, resistance to decay, durability (more 25 years) experts gave the product first place in our ranking.

Russian builders praise the ease of installation, the possibility of working at low temperature (up to -25 ° C), reliability and elasticity.

Advantages

  • resistance to decay;
  • strength;
  • durability;
  • elasticity.

disadvantages

  • a lot of weight.

KhKP-350 top layer basis fiberglass 9 m2

Rating: 4.6

Stekloizol HKP-350 top layer basis fiberglass 9 m2

Available roll waterproofing material is Stekloizol HKP-350. It can be used as a top layer when installing a roofing cake. The canvas consists of fiberglass and bitumen coating. The top side of glass sprinkled with gray slate. On the bottom surface of the web material the film is glued. Experts pay attention to some restrictions. The angle of inclination of the roof should not be more than 10 degrees, and the load on the roofing must be minimized. Therefore, the product ranks second in our ranking.

Professionals praise products for their wide scope in any climatic conditions. Only install roofing the coating should be at a positive temperature (+5 … + 40 ° C).

Advantages

  • low price;
  • light weight (3.5 kg / sq. m);
  • resistance to decay;
  • universality of application.

disadvantages

  • restrictions on the slope of the roof;
  • afraid of high load.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment