14 best tire changers

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

More and more people are thinking about their own business. Many motorists faced seasonal queues at service stations that are engaged in tire fitting. Therefore, the organization of a specialized wheel maintenance workshop looks promising in our country. The tire changer will be the key figure in it. A wide range of domestic and foreign equipment is presented on the Russian market. The recommendations of our experts will help potential buyers choose the machine with the best combination of price and functionality.

Selection recommendations

Nutrition. Electricity is required to operate the tire changer. The choice of the machine directly depends on the type of power supply in the workshop or garage.

1. You can start your own business in your own garage, where there is a 220 V socket.In this case, the search narrows down, the list includes models powered by a single-phase network. But the productivity of the machine will be limited.
2. A specialized car service requires professional equipment that runs on three-phase electricity. Such machines boast versatility and productivity. But their cost will be high.

Types of equipment. All modern tire changers can be divided into two groups.

1. Automatic models practically exclude the use of physical force of the operator during dismantling or mounting tires on wheels. All control is carried out by pressing the pedals. The pneumatics retracts the mounting rack, the device independently sets the gaps between the disc and the tire. Maximum productivity is achieved with automatic equipment.
2. On semi-automatic machines, the rack must be moved manually. On the one hand, the load on the operator's hands increases, but on the other hand, space in the workshop is saved. Semi-automatic machines are also preferable in terms of cost.

Diameter of discs. Before buying a tire changer, you should think about what size wheels will be serviced in the workshop.

1. Most passenger cars are equipped with 12-24 inch rims. If the entrepreneur plans to service only cars, then you can save money and purchase a compact machine with a small table.
2. Wheels for commercial and commercial vehicles are based on discs up to 56 inches in diameter. The best option would be equipment designed to work with large wheels.
3. In some cases, the purchase of universal equipment will be justified. Most often, it is equipped with special devices that allow you to quickly switch from mounting / dismounting passenger wheels to servicing trucks.

Additional functions. To perform a wider scope of work, as well as to alleviate the fate of the operator, manufacturers offer a number of additional options.

1. The third hand is a special tool that is designed to handle low profile rubber. Its task is to reduce the burden on the operator when performing tire fitting of Run Flat, RTF, CRS, EMT tires, etc. The third hand helps to crimp, spin and install low-profile tires.
2. Explosive inflation helps to quickly fill the tire with air, creating high pressure. This is necessary when working with tubeless tires, which do not always sit tightly on the rim. The supply of compressed air is stored in a receiver (booster) with a volume of 25-40 liters.

Our review includes 14 of the best tire changers. This equipment can be purchased in the Russian trade network. When allocating seats, the editors of the journal relied on the opinion of the expert community, taking into account the feedback from domestic users.

Rating of the best tire changers

Nomination	a place	Name of product	price
Best automatic tire changers	1	HOFMANN MONTY 3300-24 SMARTSPEED GP PLUS	RUB 279 085
	2	Giuliano S 225 EVO	RUB 278 800
	3	HOFMANN MONTY 3300-22 SMARTSPEED	RUB 271 759
	4	AE&T 220В M-231BP36	RUB 206 051
	5	Trommelberg 1885	RUB 120,960
	6	AE&T M-221B 380В	123 237 RUB
	7	KronVuz KV-505	RUB 89,000
The best semi-automatic tire changers	1	HOFMANN MONTY 1270 SMART	RUB 107,000
	2	Giuliano Silverline SL 11	RUB 142,500
	3	NORDBERG 4639,5_380V	RUB 110,639
	4	WIEDERKRAFT WDK-752622U	RUB 126,075
	5	Trommelberg 1860 3P	RUB 109 550
	6	Stankoimport GT-303	RUB 129,900
	7	KronVuz KV-503	RUB 48,000

Best automatic tire changers

For professional activities related to tire works, automatic machines are best suited. A distinctive feature of such equipment is the ability to control the pressure head without physical impact from the operator. Although the machines are more expensive, they pay off quickly enough. Experts have identified several effective models.

HOFMANN MONTY 3300-24 SMARTSPEED GP PLUS

Rating: 4.9

A wide range of tire fitting operations allows the HOFMANN MONTY 3300-24 SMARTSPEED GP PLUS stand to be performed in the workshop. Experts note the careful attitude of the equipment to UHP and Run Flat wheels, as evidenced by the WDK certificate. The automatic machine of German-Italian production is equipped with an external explosive pumping device, allowing to carry out assembly work with passenger and cargo wheels. The stand should include compact dimensions (1900x1600x1850 mm) and low weight (330 kg). The model becomes the winner of our review.

Craftsmen praise the equipment for the short stroke of the sliding cams, they show great strength and save time. Convenience in work is provided by a cabinet with shelves for tools and accessories.

Advantages

• multifunctionality;
• performance;
• short cam stroke;
• explosive pumping.

disadvantages

• not found.

Giuliano S 225 EVO

Rating: 4.8

The Giuliano S 225 EVO tire changer will become an effective equipment for small car services. It can handle small to medium workloads. Experts point out a universal mounting head that fits standard and low profile tires. Double-acting accessory (third hand) included as standard. The advantages of the model include a tiltable vertical stand (back), the ability to adjust the mounting console. The machine weighs a little (310 kg), it has compact dimensions (1590x1820x1910 mm). Clamping range from the inside is 12-24 inches, from the outside this range is 10-22 inches.

Car service specialists liked the equipment for its ease of use, compatibility with a third hand, and reliability.

Advantages

• ease of use;
• third hand;
• compactness;
• reliability.

disadvantages

• no explosive swap.

HOFMANN MONTY 3300-22 SMARTSPEED

Rating: 4.7

The developers applied the new SmartSpeed ​​inverter technology when creating the HOFMANN MONTY 3300-22 SMARTSPEED stand. The automatic machine has high productivity, the rotation speed of the working table is automatically selected. Given the small footprint, experts recommend equipping small service stations or gas stations with equipment. The strength and reliability of the machine is provided by a new electric motor and an improved gearbox. A spacious cabinet with 4 shelves is available for storing tools and accessories. The 2 (pcs) clamping cylinders deserve praise, thanks to which the force is increased by a third compared to single-cylinder models.

Users are satisfied with the reliability and manufacturability of the machine. Some owners lack explosive swap.

Advantages

• reliability;
• automatic speed control;
• spacious wardrobe;
• powerful clamping force.

disadvantages

• no explosive swap.

AE&T 220В M-231BP36

Rating: 4.6

В любом СТО или даже гараже можно установить шиномонтажный станок AE&T 220В M-231BP36. A distinctive feature of the model is power supply from a 220 V electrical network. The automatic stand is designed for boarding the wheels of cars and trucks. Thanks to the third hand function, the assembly and disassembly of the low profile rubber is accelerated. The manufacturer has installed 4 control pedals, they allow you to work comfortably and accurately. The experts drew attention to the presence of explosive pumping. The clamping range of the disc is 14-26 “inside, 12-23” outside. The maximum air pressure is limited to 8 atm.

Domestic consumers speak flatteringly about the automatic head retraction, economical power consumption (550 W), high-quality workmanship. Of the minuses, there is a high price.

Advantages

• connection to a household network;
• 4 control pedals;
• third hand;
• explosive pumping.

disadvantages

• high price.

Trommelberg 1885

Rating: 4.5

The experts found the optimal combination of price and quality in a tire changer Trommelberg 1885. The equipment operates on a 380 V network, the scope of application is limited to discs with a bore diameter of 20 inches for aluminum casting and 23 inches for steel stamping. The manufacturer has automated the operation of the main units, thereby improving operator comfort. The high durability of the equipment makes it possible to use it both in small auto repair shops and in large service stations. The stand should include compact dimensions (900х1310х1910 mm) and small weight (220 kg).

Russian users note such advantages of the machine as a low table, an adjustable chop paddle, and a convenient arrangement of pedals. The disadvantages are high oil consumption from the lubricator.

Advantages

• low table;
• affordable price;
• convenient location of the pedals;
• lightness and compactness.

disadvantages

• high oil consumption.

AE&T M-221B 380В

Rating: 4.5

Еще один шиномонтажный стенд фирмы AE&T попал в ТОП-6 нашего обзора. This time the attention of experts was attracted by the model M-221B powered by a three-phase network. The automatic machine is equipped with an explosive pump, tilted by a mounting stand. The equipment is designed to service wheels with disks with a diameter of 10-24 inches. The rim is not damaged due to the special pad on the release foot. Comfortable control of the machine is provided by 4 pedals located at an equal distance from each other. For fixing the stand on the support base, fixing holes are made.

Domestic craftsmen praise the stand for a convenient rotating table with pneumatic clamps, affordable price, explosive pumping. Some owners lack the third hand option.

Advantages

• explosive pumping;
• affordable price;
• comfortable table;
• respect for the disc rim.

disadvantages

• there is no third hand option.

KronVuz KV-505

Rating: 4.4

The KronVuz KV-505 tire changer stands out from the competition with the most attractive price. The equipment is suitable for workshops and garages where there is only a household electrical network of 220 V. The automatic equipment is equipped with a pneumatic rear console with an inclination. The experts liked the working mechanism, it is made of durable steel. A plastic cap can be attached to the mounting head, it will keep the rim and tire from damage. A 2-cylinder clamp is responsible for precise alignment and secure fixation of the disc. The stand should include the ergonomic arrangement of the pedals.

Novice tire changers are satisfied with the work of the Czech stand, light weight (208 kg), single-phase power supply. On the downside, they include the absence of a third hand and explosive pumping.

Advantages

• single-phase connection;
• careful installation;
• low price;
• ergonomics.

disadvantages

• modest equipment.

The best semi-automatic tire changers

In semi-automatic machines, the operator's hand controls the working head. Such machines are affordable, but the efficiency of the equipment is somewhat lower. Experts drew attention to several models.

HOFMANN MONTY 1270 SMART

Rating: 4.9

The maximum set of options is possessed by the HOFMANN MONTY 1270 SMART semi-automatic tire changer. Experts believe that the main feature of the equipment is purely Italian origin. All units, modules and individual parts are made at a factory in Italy, which has a positive effect on the reliability and durability of the model. A number of original ideas can be found in the design, thanks to which the work will be comfortable and the tire fitting will be gentle. Soft pads gently slide along the rim of the disc, leveling the awkward actions of a beginner. The powerful compressor is capable of delivering record air pressure (12 atm.). The stand wins gold in our review.

Users are satisfied with the versatility of the machine, workmanship, and work comfort. The only drawback is the high price.

Advantages

• high quality workmanship;
• multifunctionality;
• comfort at work;
• powerful compressor.

disadvantages

• high price.

Giuliano Silverline SL 11

Rating: 4.8

Another Italian tire changer made it to the prize podium of our review. The 11th series Giuliano Silverline SL is designed to work with the wheels of passenger cars. The equipment allows servicing discs with a diameter of 10-24 inches. The machine is equipped with all modern functions that make the operator's life easier. The mounting console easily tilts to the side, all control is carried out using 3 pedals, 4 pneumatic clamps provide reliable fixation of the disk. The experts appreciated the robustness of the mounting head and the quality air preparation lubricator.

Russian consumers liked the reinforced structure, the powerful bead squeezing device, and the sturdy mounting head. The disadvantage of the equipment is the high price.

Advantages

• wide functionality;
• convenient control;
• reliable disk fixation;
• sturdy mounting head.

disadvantages

• high price.

NORDBERG 4639,5_380V

Rating: 4.7

The tire changer NORDBERG 4639,5_380V is able to work with disks from different alloys. Structurally, the use of an additional device third hand is allowed. The manufacturer has taken care of vibration reduction, so the operator can work tirelessly for a long time. The experts liked the screw handle, which can be used to adjust the height of the pneumatic drive strut. The container for the assembly paste is conveniently located, the placement of three control pedals does not cause any complaints. The 25-inch table has reversible cams to handle a wide variety of tasks.

Masters consider the German-Chinese model to be the best option for working with stamped discs. But the casting tire requires skillful handling.

Advantages

• low vibration;
• sustainability;
• repositionable cams;
• affordable price.

disadvantages

• difficult to work with casting.

WIEDERKRAFT WDK-752622U

Rating: 4.6

Experts consider the German tire changer WIEDERKRAFT WDK-752622U to be multifunctional equipment. The model is equipped with a third hand, allowing you to work with low profile tires. For comfortable work, the manufacturer has installed a tiltable mounting stand. The machine can be used to service wheels with discs with a diameter of 14-26 inches. A distinctive feature of the model is the power supply from a 220 V power network. Combined control of the pedals and the panel helps to solve tasks of different complexity. The clamping jaws can be fitted with special protectors to protect the disc from damage.

Users are satisfied with the wide functionality of the equipment, respect for disks, single-phase power supply. Of the minuses, they note the high price.

Advantages

• explosive pumping;
• third hand;
• tiltable mounting rack;
• single-phase power supply.

disadvantages

• high price.

Trommelberg 1860 3P

Rating: 4.5

The Trommelberg 1860 3P tire changer belongs to professional equipment. The stand is powered from a three-phase network; the manufacturer has provided for the possibility of upgrading the model. Expand your machine's capabilities with additional options such as blast pumping, third arm and chuck jaws for large discs (up to 30 inches). The standard equipment includes a two-speed table with 4 clamping jaws and plastic protectors, a lubricator filter, a mounting paddle, a shelf for storing tools and accessories, and a gun.

Russian craftsmen speak flatteringly about the wide blade, comfortable foot control system, and the democratic price of the machine. The disadvantages include a minimum of modern functions in the basic configuration.

Advantages

• affordable price;
• wide scapula;
• powerful compressor (up to 10 bar);
• reliability.

disadvantages

• modest basic equipment.

Stankoimport GT-303

Rating: 4.4

The Russian machine Stankoimport GT-303 also got into the TOP-6 of our review. Experts believe its strong point is the presence of a pneumatic lever, which is installed on the pressure head. Such a device greatly facilitates the fate of the operator. A special pad on the foot prevents damage to the disc rim. The equipment can be used to service the wheels of cars and trucks. The explosive pumping option should be added to the asset of the semi-automatic machine. The manufacturer took care of the safety of the equipment; there are many warning signs and inscriptions on the case.

Domestic users like to work at the stand, tire fitting does not take a lot of physical strength. But they consider the price too high.

Advantages

• explosive pumping;
• respect for the rim;
• pneumatic lever on the pressure head;
• safety at work.

disadvantages

• overcharge.

KronVuz KV-503

Rating: 4.3

An excellent option for starting a small business in a garage is the KronVuz KV-503 tire changer. It stands out from the competition for its low price. Experts believe that another advantage is power from a household network (220 V). The equipment is designed for mounting and dismounting of rubber with a bore diameter of 10 … 24 inches. The model is also equipped with such useful options as an auxiliary arm and an explosive pumping module. The Czech machine is made of high-quality steel, the precise alignment of the disc and reliable fixation are provided by the pressure cylinders (2 pcs.). The control pedals are conveniently positioned with easy access to the lubricator and lever.

Russian garage craftsmen liked the machine for its wide functionality, affordable price and single-phase power supply. Of the minuses, there is little power.

Advantages

• two clamping cylinders;
• ease of use;
• low price;
• single-phase power supply.

disadvantages

• low power.

---

Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.