14 best plasters

Ratings of the best repair products

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Plaster mixes are widely used in the construction industry. If earlier this material was used exclusively for leveling walls and ceilings, today some compounds are used for decorative finishing. Accordingly, the range of plasters has also expanded. Today it is already difficult to find builders who prepare cement-lime mortars on their own. They were replaced by innovative developments that simplify not only the preparation of the solution, but also the application and leveling. Once in a construction supermarket, a simple layman can easily get confused. In order not to be mistaken in choosing a plaster, it is worth reading the recommendations of specialists.

Criteria for choosing plaster

  1. First of all, the master must roughly determine the thickness of the leveling layer. Most often, plaster is resorted to when deviating from the ideal by at least 3 mm. It is possible to plaster large irregularities in several layers, but due to the long drying of the surface, precious time is lost. In this case, pay attention to the maximum permissible thickness of one layer.

  2. When choosing a composition, it is important to consider the type of substrate. If almost any plaster is perfectly combined with concrete bases, then you will have to carefully select a mixture for gypsum-containing bases.

  3. Some types of plasters can be used to prepare the surface for laying tiles, other solutions allow you to create modern decorative surfaces.

  4. Not all plasters retain their qualities equally well in dry rooms and outdoors. If a wide range of compositions is suitable for interior work, then for finishing external bases it is better to buy products that are resistant to moisture, frost and ultraviolet light.

  5. Plasters differ in composition. Cement mixes are good for outdoor use and are the most affordable. Gypsum plasters dry quickly and are usually limited to dry rooms. The most expensive are synthetic compounds. They give the master a wide field for activity.

Our review includes the best plasters. When compiling the rating, the following criteria were taken into account:

  1. appointment;

  2. the composition of the product;

  3. price;

  4. expert opinion;

  5. consumer reviews.

Advantages and disadvantages of various types of plasters

Plaster type

Advantages

disadvantages

Cement

+ low price

+ resistance to weathering

+ vapor permeability of the coating

– used only for leveling bases

– lack of elasticity

Gypsum

+ plasticity

+ fast drying

+ can be used for decorative purposes

+ thick layer

– afraid of atmospheric influences

– does not withstand mechanical stress

Synthetic

+ plasticity

+ versatility

+ high adhesion

+ decorativeness

– high price

– low vapor permeability

– gets dirty easily

Rating of the best plasters

Nomination a place Name of product Rating
The best cement plasters 1 PLITONIT Т1 + 4.9
2 Knauf Grunband 4.8
3 Weber.vetonit TT40 4.7
4 Ceresit CT 29 4.7
5 Kreps Master 4.6
6 KM Profi with reinforcing fiber 4.5
The best gypsum plasters 1 Knauf Rotband 4.9
2 Vetonit Profi Gypsum Reinforced (Weber Vetonit) 4.8
3 VOLMA Layer 4.8
4 Ceresit CT 35 4.7
5 Unis Teplon 4.6
6 Founding Gipswell 4.5
The best synthetic resin plasters 1 Caparol streichputz 4.8
2 Mapei Nivoplan 4.7

The best cement plasters

The main purpose of cement plasters is to level internal and external substrates. After drying, it forms a durable coating that is resistant to water, frost and sunlight. The experts chose several compositions popular in Russia.

PLITONIT Т1 +

Rating: 4.9

PLITONIT Т1 +

PLITONIT T1 + plaster is a cement-based composition, which contains water-repellent components and reinforcing fibers. The mixture can be used for leveling indoor and outdoor substrates. Experts highly appreciated the versatility of the application, the plaster adheres perfectly to concrete, brick, aerated concrete surfaces. The material was deservedly recognized as the winner of the rating. It has good adhesion, is easy to apply and does not crack after drying.

Finishers respond positively to the viability of the prepared solution (240 minutes), a wide range of thicknesses (from 2 to 30 mm). Plaster can be applied manually or with the help of mechanization.

Advantages

  • wide range of thicknesses;

  • low consumption;

  • moisture resistance and plasticity;

  • applied by hand or by machine.

disadvantages

  • not found.

Knauf Grunband

Rating: 4.8

Knauf Grunband

Knauf Grünband cement plaster can be a very profitable option for finishing a house or apartment. The porous structure, which is provided by expanded polystyrene granules, gives the layer thermal insulation properties. At the same time, experts note the uniformity of the composition and the ease of application to the base. Due to its moisture resistance, the material is successfully used for both interior and exterior decoration. Considering all these qualities, the squad is worthy of the second line of our rating. In contrast to the winner, the thickness range looks somewhat more modest (10-30 mm).

Professional builders highlight one more feature of plaster, it is striking in its economical consumption. For leveling 1.4 sq. m 15 mm thick, one bag weighing 25 kg is enough.

Advantages

  • thermal insulation properties;

  • uniformity of composition;

  • moisture resistance;

  • economical consumption.

disadvantages

  • insufficient strength.

Weber.vetonit TT40

Rating: 4.7

Weber.vetonit TT40

Weber.vetonit TT40 cement plaster has universal qualities. It is suitable for leveling concrete, brick, expanded clay concrete and stone foundations. The composition retains its properties both in heated dry rooms and in outdoor conditions. The solution is applied manually or by machine. The versatility of the product did not go unnoticed by experts; plaster was included in the top three of the rating.

Finishers include a wide range of thicknesses, from 5 mm to 40 mm, to the strengths of the material. After cooking, the master will have 2 hours to work out the solution. For high-quality hardening in dry rooms, it is required to moisten fresh plaster with water for the first 2 days.

Advantages

  • universality of application;

  • high strength;

  • moisture and frost resistance;

  • large thickness of one layer.

disadvantages

  • does not adhere well to the wall.

Ceresit CT 29

Rating: 4.7

Ceresit CT 29

The quality of Ceresit CT 29 cement plaster is so high that in some cases, after leveling the walls or ceiling, no further filling is required. To make the cement composition more malleable, the manufacturer added reinforcing fibers and polymer additives. The scope of application is somewhat limited, the mixture is suitable for leveling bases of brick, concrete or plastered surfaces. Therefore, the material is only in fourth position in the rating.

Finishers use plaster not only to decorate walls and ceilings, but also to form window slopes. Particular praise was given to such qualities as efficiency and manufacturability.

Advantages

  • multifunctionality;

  • smooth surface;

  • suitable for finishing slopes.

disadvantages

  • high price;

  • low crack resistance.

Kreps Master

Rating: 4.6

Kreps Master

Russian plaster Kreps Master is a dry composition of fine sand, cement and plasticizers. With its help, you can level walls and ceilings made of concrete, brick, aerated concrete, reinforced concrete. Material consumption is 1.5 kg / sq. m with a layer thickness of 1 mm. According to experts, the plaster keeps well both in dry rooms and in outdoor conditions.

A place in the ranking of the composition was also ensured by good reviews of the finishers. The mixture is easy to prepare and apply, it has excellent adhesion, after drying, the layer does not crumble. The plaster hardens quickly, so the master has about 8-10 minutes to apply and level. You can work with the solution either manually or with the help of mechanization tools.

Advantages

  • excellent adhesion;

  • easy to prepare and apply;

  • durable layer.

disadvantages

  • the solution dries very quickly.

KM Profi with reinforcing fiber

Rating: 4.5

KM Profi with reinforcing fiber

An excellent combination of availability and quality is noted in the KM Profi cement plaster with reinforcing fiber. It adheres well to concrete, brick, cement-lime and cellular substrates. Strength and elasticity is provided by reinforcing fiber, the material does not lose its condition in a humid environment and at low temperatures. Therefore, plaster deservedly gets into our rating. Only the composition is not suitable for leveling gypsum-containing surfaces.

High quality material is achieved through the use of ingredients such as Portland cement, lime, fine sand. After drying, the layer does not crack, since modifying plasticizers are added to the mixture.

Advantages

  • easy to prepare and apply;

  • durable layer.

disadvantages

  • poor adhesion;

  • high consumption.

The best gypsum plasters

Gypsum-based plasters allow not only leveling the bases, but also completely preparing the surface for painting or pasting. These compounds have proven themselves best when decorating interiors. The following mixtures are included in our rating.

Knauf Rotband

Rating: 4.9

Knauf Rotband

Knauf Rotband plaster has been used by Russian builders for many years. In a variety of comparative tests, this composition invariably falls on the pedestal. Our rating was no exception, experts gave Rotband the winner's laurels. The basis of the mixture is gypsum, to which polymer components and plasticizers are added. The mixture is intended for leveling walls and ceilings inside buildings. At the same time, due to moisture resistance, the material can be used even in baths, bathrooms or kitchens. The mortar adheres perfectly to various substrates, be it concrete or brick. The layer thickness can vary from 5 to 50 mm.

Professional builders note excellent adhesion, plasticity, fast drying. The advantages of the composition include fire resistance, vapor permeability and environmental friendliness.

Advantages

  • excellent adhesion;

  • universality of application;

  • high plasticity;

  • environmental friendliness.

disadvantages

  • high price.

Vetonit Profi Gypsum Reinforced (Weber Vetonit)

Rating: 4.8

Vetonit Profi Gypsum Reinforced (Weber Vetonit)

Plaster Vetonit Profi Gips confidently took the second place in the rating for a number of reasons. The composition has increased adhesion to a wide range of substrates, from concrete to gypsum surfaces. Due to the presence of microfibers and plasticizers, a layer up to 50 mm thick can be applied in one pass. In addition, these additives prevent the plaster from cracking after drying.

Finishers call Vetonit Profi Gypsum the most plastic material. It is easily leveled, and the formed layer is even and uniform. The color of the coating depends on the plaster; there may be different shades in white.

Advantages

  • reinforced with microfiber;

  • easy to draw and align;

  • no cracks form upon drying;

  • high plasticity.

disadvantages

  • plaster comes across with instant solidification.

VOLMA Layer

Rating: 4.8

VOLMA Layer

Domestic VOLMA Layer plaster is sold at the most attractive price. The composition is based on high-quality gypsum, mineral and chemical components are added to it. The mixture adheres perfectly to concrete, brick, aerated concrete and plasterboard bases. The main advantage of this material, according to experts, is the glossy surface of the applied layer. Therefore, finishers often exclude the filling operation. The plaster was included in the top three of the rating also for its environmental friendliness, which is confirmed by the relevant certificates.

The exceptional purity of the composition allows its use in children's and medical institutions. Breathable plaster maintains an optimal indoor climate.

Advantages

  • excellent adhesion;

  • environmental friendliness;

  • exceptional purity of the composition.

disadvantages

  • elasticity is lost 30 minutes after mixing.

Ceresit CT 35

Rating: 4.7

Ceresit CT 35

The quality of Ceresit building mixtures is well known throughout the post-Soviet space. Ceresit CT 35 decorative plaster has all the advantages of German-Russian products. The main purpose of the composition is the decorative finish of already plastered or previously prepared surfaces. The product can be purchased in different colors. Most often, craftsmen use the mixture simultaneously with the thermal insulation device. Taking a higher position in the rating was prevented by the cost of plaster. And the life time of the finished mass is limited to 1 hour.

Builders use materials for finishing indoor and outdoor bases. After drying, the coating becomes resistant to low temperatures and ultraviolet light.

Advantages

  • German quality;

  • there is a choice of colors;

  • resistance to low temperatures and ultraviolet light.

disadvantages

  • high price;

  • fast hardening.

Unis Teplon

Rating: 4.6

Unis Teplon

Unis Teplon gypsum plaster has one important advantage over competitors. After drying, the surface acquires a snow-white color. Therefore, after sanding, you can start painting or pasting. Experts also note the possibility of applying a thick layer in one pass (up to 50 mm). The scope of application of the composition is limited only to the internal premises, which influenced the place in the ranking. Craftsmen also note the fast setting time of the prepared solution (50 minutes). But it is possible to apply plaster on the walls not only by hand, but also with the help of mechanization means.

Users in reviews express satisfaction with the affordable price, economical consumption and clear instructions for use. Poor adhesion spoils the pleasant impression.

Advantages

  • affordable price;

  • snow-white color;

  • large thickness of one layer.

disadvantages

  • poor adhesion;

  • the scope of application is limited.

Founding Gipswell

Rating: 4.5

Founding Gipswell

The biggest smoke break can be afforded by finishers using Osnovit Gipswell gypsum plaster. The prepared solution has a pot life of 90 minutes. Another advantage allowed the material to get into our rating. This is a record range of single layer thickness (3-80 mm). Due to its good adhesion, the composition can be applied on concrete, brick, plaster substrates. The only limitation will be the use in dry heated rooms.

Craftsmen also highly appreciate the condition of the surface after drying. After sanding, you can start decorating walls or ceilings. The consumer will receive all this set of qualities at an affordable price.

Advantages

  • duration of viability;

  • wide range of single layer thicknesses;

  • acceptable price.

disadvantages

  • cracks after drying;

  • unstable quality.

The best synthetic resin plasters

The most modern types of plasters are compounds based on synthetic resins. The mixes are easy to prepare, apply and level. Synthetic plasters are often used to decorate walls and ceilings. Here are some quality products.

Caparol streichputz

Rating: 4.8

Caparol Streichputz plaster

Caparol Streichputz matt plaster allows to create high quality thin-layer and weather-resistant coatings. The basis of the German composition is synthetic resin, the material can be diluted with water to the desired consistency. Experts gave the material the palm for a wide range of applications. With the help of a plastic mass, it is possible not only to level the bases, but also to produce various types of modern finishes (dusting of mosaics, imitation of sgraffito).

High marks from professional builders received such qualities of plaster as durability, environmental friendliness, low odor, no cracking after drying. The mixture is easy to apply and level.

Advantages

  • weather resistance;

  • strength and ductility;

  • environmental friendliness;

  • wide range of applications.

disadvantages

  • high price.

Mapei Nivoplan

Rating: 4.7

Mapei Nivoplan

Experts attribute a reasonable price, good adhesion and high elasticity to the strong qualities of Mapei Nivoplan synthetic plaster. Therefore, the composition has established itself as a versatile material that allows not only leveling the outer and inner bases. With the help of the mixture, it is possible to carry out the restoration of plastered surfaces, to prepare the walls for laying tiles. The elasticity of the mortar, combined with good adhesion, allows it to be applied to the ceiling. The thickness of one layer is limited to 30 mm.

Before starting work, it is important to properly prepare a dry composition by mixing it with water. Plaster is not suitable for leveling gypsum-containing substrates. These properties did not allow the material to become the winner of the rating.

Advantages

  • universality of application;

  • affordable price;

  • good adhesion.

disadvantages

  • rarely found in the retail network;

  • not suitable for plaster surfaces.


Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment