14 best hacksaws

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Despite the abundance of electric tools for cutting materials, traditional hacksaws are also used in human activities. With their help, you can quickly cut workpieces of different density. At the same time, there is no need to unwind the electric wire, refuel the equipment with gasoline, the tool does not take up much space in the trunk of the car. The low price allows you to have hand tools not only for professionals, but also for home craftsmen. Today there are many different models, expert advice will help you make the right choice.

How to choose a quality hacksaw

1. For working with wood, both one-handed and two-handed models are suitable. It is better to cut off branches with a tool with narrow saber-shaped blades. And it is more convenient to work with boards or bars with a classic hacksaw with a wide, even blade. Firewood can be quickly prepared using a traditional two-handed saw.
2. To work with harder materials based on wood and cardboard (laminate, parquet, chipboard, MDF, etc.), a special hacksaw is required. She has a different blade shape, hardness and sharpening of the teeth.
3. For cutting popular gas silicate blocks, you must use a special hacksaw with large teeth. The cutting part is equipped with carbide inserts, they remain sharp even after the construction of several buildings.
4. On the contrary, a hacksaw for metal is equipped with narrow blades with the smallest teeth. Most often, such a tool has a frame structure.
5. There are special hacksaws for cutting drywall. They have a special tooth configuration to make an even cut.
6. When choosing a hacksaw, it is important to pay attention to the convenience of the handle. They come in many shapes and are made from traditional and modern materials. The main thing is to have a reliable and comfortable grip.
7. Since during long-term operation from friction there is a strong heating of the blade, only carbon and high-speed steel grades are able to maintain hardness and sharpness. The hardness of the cutting edge should be at the level of 60-65 HRC, and the blade itself should be 45 units.

Our review includes 14 of the best hacksaws. When compiling the rating, the opinion of experts and user reviews were taken into account.

Rating of the best hacksaws

Nomination	a place	Name of product	price
The best hacksaws for wood	1	Bahco 2600-16-XT11-HP	RUB 1,895
	2	Stanley 2-20-180	RUB 1,857
	3	Fiskars 124810	RUB 1,260
	4	Gross 23100	RUB 1,049
	5	Zubr 1524-100	649 r
The best hacksaws for aerated concrete	1	IRWIN 10505549	3 400 rub.
	2	Zubr 15157-70	RUB 1,080
	3	STAYER 2-15096	RUB 920
The best hacksaws for metal	1	Bahco 325	RUB 2 850
	2	Stanley 0-20-108	649 r
	3	Gross 77604	1 390 rub.
Best drywall hacksaw	1	Stanley 2-20-149	RUB 2,085
	2	Bahco PC-24-PLS	RUB 1,625
	3	IRWIN 10505705	RUB 1,062

The best hacksaws for wood

It is better to choose a hacksaw for wood depending on the purpose. A saw that has a blade length of 450-500 mm with an average size of teeth is a universal saw. It is more convenient to cut the garden with a shortened bow or circular model. And only a long two-handed saw can handle logs. The experts have selected several quality products.

Bahco 2600-16-XT11-HP

Rating: 4.9

The Swedish Bahco 2600-16-XT11-HP hacksaw can handle various materials on a wooden base. The model of the universal type is designed for cross-cutting, although longitudinal cutting will also be possible in skilled hands. The experts praised the unusual geometry and long-lasting sharpness of the teeth, giving the model the first place in our rating. It should be noted the presence of a low-friction coating, it reduces friction during operation. This has a positive effect not only on the worker's fatigue, the canvas heats up less. In addition, the protective layer prevents corrosion. The handle has a two-component structure, it has a comfortable grip and reliable attachment to the canvas.

Users are particularly fond of the quality cut. The disadvantages include the blackening of the cut at the initial stage of application.

Advantages

• high quality;
• light weight (0.45 kg);
• comfortable handle;
• perfect cut.

disadvantages

• high price.

Stanley 2-20-180

Rating: 4.8

The Stanley 2-20-180 hacksaw was created especially for laminate flooring. The manufacturer made the blade from a high-strength quick cut. The latest heat treatment technology is used to harden the teeth. It allows you to withstand high loads without additional sharpening. At the same time, working with hand tools is quick and comfortable. The American hacksaw is light enough (0.46 kg), the blade length (450 mm) is enough for cross-cutting laminate and parquet boards. The tool is well gripped in the hand thanks to the ergonomic two-component handle.

Finishers praise the Stanley 2-20-180 hacksaw, highlighting the quality of the materials used and an even cut. In terms of cutting speed, a hand tool is not inferior to a jigsaw, winning in accuracy. The model is in the second position.

Advantages

• high-quality manufacturing;
• precise cut;
• unique hardening of teeth;
• long service life.

disadvantages

• high price.

Fiskars 124810

Rating: 4.7

The Fiskars 124810 bow saw is designed for pruning trees in the garden. The model has a collapsible design, the cutting blade can be changed quickly and without keys. The hacksaw is not very light (0.77 kg), so it will be tedious to cut branches with an outstretched arm. If necessary, you can help with the other hand by grasping the metal arc. For a comfortable grip, the manufacturer made special notches for the fingers. The saw frame is protected from corrosion by paint and varnish. With a hacksaw length of 700 mm, it is optimal to work with branches with a diameter of 50-80 mm.

Users have no special complaints about the quality of the hacksaw, except that there is a slight shift of the canvas to the side. But the main problem for domestic owners is finding spare canvases. Therefore, the hacksaw ranks third in the ranking.

Advantages

• light weight;
• comfortable grip;
• compactness;
• high quality canvas.

disadvantages

• no spare canvases on sale.

Gross 23100

Rating: 4.7

The Gross 23100 circular hacksaw is able to work with different materials. This is not only wood, composites (laminate, MDF, chipboard, etc.), but also various polymers (polyurethane, expanded polystyrene). The saw is designed by a renowned German manufacturer and manufactured in Taiwan. The main part of the product is a Japanese steel cutting blade. The teeth are 3D sharpened, so the cut is high quality and the cutting speed is high. A polymer coating is used to protect the canvas from rust. The grip is based on durable plastic, the grip has a special soft pad.

Many craftsmen have in their arsenal a circular saw Gross 23100. They note the lightness (0.188 kg) and compactness of the model. Only the performance of the hacksaw is severely limited. The model does not make it into the top three of the rating.

Advantages

• lightness and compactness;
• 3D teeth;
• affordable price;
• comfortable handle.

disadvantages

• low productivity.

Zubr 1524-100

Rating: 4.6

The two-handed saw, which used to be in every home, today has become a real rarity. What should motivate the buyer to purchase the Zubr 1524-100? It's not just nostalgia or a desire to get in shape. First of all, the low price attracts. The second point that worries travelers, fishermen or hunters is compact size and mobility. Removing a fallen tree from the road or preparing a few logs for the camp is as easy as two people. With the right skill, even one person can make a cut. The blade looks simple and practical, sharp 2D teeth instantly dig into the wood.

The wooden handles are somewhat upsetting for fastidious users, for which it is inconvenient to hold the tool, as well as the working position when cutting. The product closes our rating.

Advantages

• compactness;
• practicality;
• low price.

disadvantages

• wooden handles;
• uncomfortable posture when cutting.

The best hacksaws for aerated concrete

Foam and aerated concrete blocks have become a popular building material for wall construction. Coarse-toothed hacksaws are used to cut the dense structure. The blade length varies in the range of 500-700 mm, the teeth must be tipped with carbide. Experts have identified several good models.

IRWIN 10505549

Rating: 4.9

A necessary tool for a bricklayer is a hacksaw for aerated concrete. The IRWIN 10505549 saw is designed for long-term work with block materials. The safety margin is enough for the construction of several houses. The blade is 700 mm long and made of 1 mm thick Swedish steel. The cutting part is made using TGT technology (triangular sharpening), every second tooth is carbide soldered. For comfortable work of the operator, the manufacturer has equipped the hacksaw with a soft ergonomic handle. It connects to the canvas using a screw fastening. During storage and transport, the blade is protected by an interactive case.

Users refer to the saw as one great asset. With its help, an accurate and smooth cut is possible, the tool has been serving for many years. The model ranks first in our rating.

Advantages

• Swedish steel;
• carbide-tipped teeth;
• triangular sharpening;
• ergonomic handle.

disadvantages

• high price.

Zubr 15157-70

Rating: 4.8

Decent quality at an affordable price allowed the Zubr 15157-70 hacksaw to take second place in the ranking. To work with hard material, the manufacturer has applied several new technologies. The steel sheet is protected from corrosion and mechanical impact by an anti-friction coating. Special large teeth are “VK8” carbide-tipped. To connect the carbide to steel, a special brazing technology was used. The blade is attached to the 2-piece handle with 3 screws. High impact plastic combined with a soft polymer pad. It is possible to store the hacksaw in a suspended position thanks to the hole in the edge of the blade.

The builders note the high-quality production of the saw, the reasonable price. But in order to get an even cut, it is necessary to adapt to the slipping of the blade.

Advantages

• carbide teeth;
• hanging hole;
• acceptable price.

disadvantages

• there is a shift of the canvas to the side.

STAYER 2-15096

Rating: 4.7

At the most affordable price, the STAYER 2-15096 aerated concrete hacksaw is sold in the domestic market. The German-Chinese instrument is suitable for home craftsmen who build houses, garages and outbuildings with their own hands. Unlike the leaders in the rating, the model has a shorter steel blade (500 mm), protected by an anti-friction coating. Coarse teeth with carbide inserts are spaced 20 mm apart. The plastic handle has a rubberized insert, which makes the work comfortable. The hacksaw can be hung during storage thanks to the hole in the blade.

In the reviews, users consider the hacksaw to be the most suitable option for home construction. Only it is difficult to make longitudinal cuts because of the short blade.

Advantages

• low price;
• ergonomic handle;
• sharp carbide teeth.

disadvantages

• teeth quickly become blunt;
• short web.

The best hacksaws for metal

The narrow and thin blade of a hacksaw for metal is able to penetrate into the most inaccessible places where it is impossible to get close with a grinder. Making cuts in different directions will be easier if you can turn the blade to the desired angle. Here are some effective tools.

Bahco 325

Rating: 4.9

A unique hacksaw for metal professionals is the Bahco 325. It has a sturdy aluminum frame with a spring tension mechanism. This design allows you to quickly and conveniently replace the hacksaw blade. After installation, the cutting element is centered, resulting in a perfect balance. The blade can be installed at an angle of 55 degrees. The manufacturer equips its product with a Sandflex bimetallic blade 300 mm long. Due to its high hardness, sharp sharpening remains for a long time.

The Bahco 325 hacksaw is considered by artisans to be the best tool for cutting metal. Experts highly appreciated the quality of the product, giving it the first place in our rating.

Advantages

• high quality;
• aluminum frame with spring mechanism;
• bimetallic blade;
• two cutting corners.

disadvantages

• high price.

Stanley 0-20-108

Rating: 4.8

The experts gave the second place in our rating to the Stanley 0-20-108 hacksaw-transformer. The manufacturer has developed a unique frame design that allows you to choose one of five configurations depending on the cutting conditions. With the help of a file, it is possible not only to saw metal workpieces, but also to align the edges. The blade can also be rotated 45 degrees. The base of the hacksaw is a fiberglass-coated steel frame. It has a special compartment for storing the cutting blade. The tool can be held with both hands and one. A two-piece handle provides a comfortable hold.

The hacksaw has earned praise for its versatility and from consumers. Bright coloring is also a plus of the model. But the build quality does not allow the product to surpass the leader.

Advantages

• multifunctionality;
• ease of use;
• stylish design;
• strength.

disadvantages

• poor quality assembly;
• great weight.

Gross 77604

Rating: 4.7

Simple and affordable hacksaw Gross 77604 took third place in our rating. The model has a steel frame protected from corrosion by paint and varnish. The manufacturer equipped his product with a lever mechanism, he is responsible for the maximum tension of the cutting blade. The blade can be rotated 45 and 90 degrees. The bimetallic blade is made of carbon steel, to which a fast cutting strip with teeth is welded. Thanks to the specially shaped grip and rubberized insert, it is convenient to hold the tool, reducing fatigue during long sawing.

Users in the reviews are flattering about the quality of the materials used, the reasonable price and the lever mechanism. But the quality of the canvas leaves much to be desired.

Advantages

• beautiful appearance;
• robust construction;
• comfortable to hold in hand;
• tension lever mechanism.

disadvantages

• the canvas wears out quickly.

Best drywall hacksaw

When cutting drywall, the hacksaw has to go through the paper structure, and then the plaster. Therefore, the blade must not only be hard and sharp, but also have a certain tooth configuration. Hacksaws with a classic shape are suitable for craftsmen, and for beginner finishers it is better to use a compact and lightweight tool in the form of a knife. Experts advise paying attention to the following models.

Stanley 2-20-149

Rating: 4.9

The Stanley 2-20-149 hacksaw has a robust design. It is designed to make precise and even cuts in difficult materials such as gypsum boards and panels. For the manufacture of the blade, the manufacturer used high-strength high-speed steel U8A. Experts drew attention to the triangular sharpening of the teeth, for hardening the cutting part was subjected to selective heat treatment. The handle not only has a comfortable shape and a pleasant to the touch surface. The angle between the cutting edge and the worker's hand line is very well chosen. The model becomes the winner of our rating.

Users have no complaints about the quality of the hacksaw. With its help, it is possible to smoothly and quickly make cuts in drywall.

Advantages

• triangular sharpening of teeth;
• convenience at work;
• two-piece handle;
• anti-friction coating.

disadvantages

• high price.

Bahco PC-24-PLS

Rating: 4.8

The Swedish plasterboard hacksaw has a special cutting configuration. First there is a line of small teeth (GT geometry), and then several groups of teeth (4 each), alternating with depressions, follow. Thanks to this distribution of cutting elements, it was possible to increase the sawing efficiency due to the timely removal of chips and dust. The blade length is 600 mm, which is optimal for working with drywall. It is very convenient to work with a hacksaw, one of the reasons for comfort is the two-component handle.

Many finishers use the Swedish hacksaw, praising the quality and efficiency of the use. Serious problems arise only with blade sharpening. The experts gave the instrument the second place in the rating.

Advantages

• unique configuration of the cutting part;
• two-component handle;
• durable canvas;
• efficient sawing.

disadvantages

• complex sharpening.

IRWIN 10505705

Rating: 4.7

The most compact and convenient tool for cutting drywall is the IRWIN 10505705 hacksaw. The American manufacturer made it in the form of a large knife, the blade of which has teeth. The total length of the model is 345 mm, of which 150 mm falls on the blade. In addition to drywall, the tool copes well with wood and plastic, which makes it versatile. The blade is made of strong steel and tapered towards the end. This shape allows the craftsman to cut different shapes. The lightweight hacksaw (0.13 kg) is easy to hold in your hand thanks to the two-component handle.

Many users rave about the compactness and lightness of the hacksaw. It has an affordable price and does not interfere during work. The disadvantages include low performance when performing large-scale projects.

Advantages

• compactness and lightness;
• narrow blade;
• low price;
• comfortable handle.

disadvantages

• poor performance.

---

Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.