14 best brushless screwdrivers

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Brushless screwdrivers have a compact size, stable speed and a long service life. The motor works thanks to magnetic coils. Friction on the graphite brushes does not occur due to their absence, so the rotor rotates without sparks, which allows the use of the tool in places where gas accumulation is possible (mines, tunnels, etc.). We analyzed a huge range of brushless models and highlighted the TOP-14, dividing it into categories. Here you will find a proven tool with good features, which experts and users like.

Best brushless screwdrivers

First, consider screwdrivers with bit-only chucks. This is a power tool that is used to install fasteners (screws, screws, screws). If there is a reverse, the equipment is suitable for dismantling building structures and disassembling various equipment. Due to the special hexagonal shape of the chuck socket, it will not work to fix the drill in such a device.

Nomination a place Name of product price
Best brushless screwdrivers 1 DeWALT DCF620D2K 30 Nm RUB 15 545
2 Makita DF032DWAX1 35 Nm RUB 11,908
3 Hitachi WM18DBL 33 Nm RUB 14,460
4 BOSCH GSR 18 V-EC TE 0 25 Nm RUB 11,759
5 Makita DDF083Z 40 Nm RUB 5,900
Best brushless drills 1 Milwaukee M18 FDD-502X 135 Nm RUB 43 300
2 Metabo BS 18 LTX BL I 5.2Ah x2 Case 120 Nm RUB 23,451
3 Makita DHP481RTE 115 Nm RUB 24,916
4 DeWALT DCD996P2 820 W 95 Nm RUB 24,536
5 AEG BSB 18CBL LI-402C 75 Nm RUB 25,519
6 BOSCH GSR 18 VE-EC 5.0Ah x2 L-BOXX 75 Nm RUB 31,990
7 DeWALT DCD791D2 70 Nm RUB 15 326
8 Makita DF332DWAE 35 Nm RUB 10,836
9 BISON DAI-18-2-Li KNM4 60 Nm RUB 8 635

DeWALT DCF620D2K 30 Nm

Rating: 4.9

DeWALT DCF620D2K 30 Nm

In the first place is the DCF620D2K brushless screwdriver, which runs on batteries with a voltage of 18 V. It is capable of developing up to 4400 rpm and a tightening force of 30 Nm. The set includes two batteries, with a capacity of 2.0 A / h and a case, as well as two bits. The screwdriver weighs 1.9 kg. His rotation speed is regulated by the force of pressing the trigger. It is not possible to quickly set a constant value. At the end of the cartridge there are three light diodes, which facilitate visibility in poorly lit areas. The masters in the reviews like that the battery is charged within an hour, so while one is discharged, the second will be completely ready.

We recommend this screwdriver for installing drywall sheets in large volumes. The brushless model perfectly withstands loads for 6-8 hours of continuous operation. The kit also includes a nozzle for tape feed of fasteners, which significantly saves time and increases productivity. The stem adjustment allows you to set the desired twist depth.

Advantages

  • fits comfortably in the hand;
  • reliable model;
  • roomy case;
  • quite quiet operation of the brushless motor.

disadvantages

  • no step speeds;
  • there is no engine brake;
  • sometimes the reverse switch is accidentally hit.

Makita DF032DWAX1 35 Nm

Rating: 4.8

Makita DF032DWAX1 35 Nm

In second place is the brushless kid from “Makita”, which runs on a 10.8 V battery. The set comes with two batteries with a capacity of 2.0 A / h. Unlike the brushless power tool described above, there is a speed selector to quickly set the desired speed, moving from one process to another. The speed is not the highest – 1500 rpm, but the torque reaches 35 Nm. Owners like the presence of a charge indicator to find out how full the battery capacity is. The backlight also shines with a delay here, so after screwing in the fasteners, you can see the final result without pressing the trigger.

We recommend this screwdriver as one of the smallest and lightest in its class. Its weight is only 870 g. The length of the case with a brushless motor and a cartridge does not exceed 124 mm, so it is convenient for them to crawl into the narrowest places. The steel clip allows you to quickly free your hands, and no special belt is required for hanging in the air.

Advantages

  • there is a lamp for spot illumination;
  • locking the start button;
  • two speeds;
  • good equipment.

disadvantages

  • there is no magnetic bit holder;
  • there is a slight backlash at the point where the tooling enters the chuck

Hitachi WM18DBL 33 Nm

Rating: 4.8

Hitachi WM18DBL 33 Nm

The Hitachi brand offers the WM18DBL brushless screwdriver with a torque of 33 Nm. The model is powered by 18 V battery and has one speed. You can change the intensity of rotation by pulling the trigger. The maximum speed is 1100 per minute. Buyers in the reviews are satisfied with the presence of two batteries with a capacity of 3.0 A / h in the set, which lasts longer than 2.0 A / h. They charge in 45 minutes, so there will be no downtime. The brushless tool weighs 1.7 kg and the body length is 162 mm. A metal clip is provided for wearing on the belt. The back and top of the plastic cover are covered with rubber to prevent damage in the event of a fall.

We considered the screwdriver the best because this brushless model has an impact function. Thanks to the tapping of the chuck with a striker, the screws are screwed in much faster. In case of dismantling, the hammer mechanism will help to move old fasteners out of place.

Advantages

  • spotlight lamp;
  • the power button is locked;
  • the handle is rubberized on all sides;
  • clip for hanging on the belt.

disadvantages

  • it is difficult to maintain the required speed constantly;
  • for some, the batteries stop charging after a couple of years of use.

BOSCH GSR 18 V-EC TE 0 25 Nm

Rating: 4.7

BOSCH GSR 18 V-EC TE 0 25 Nm

Among the brushless screwdrivers there is a model from “Bosch”, which stands out for its unusual L-shaped case with an extension. The back of the handle is fitted with a rubber grip, so the tool does not slip out of your hands. The brushless motor is capable of spinning the spindle up to 4200 rpm, and the torque is 25 Nm. The product has an electronic speed control and a reverse function. To free your hands, a metal bracket is provided at the bottom. The manufacturer has equipped the screwdriver with illumination, but the diode is located at the bottom and does not always fall into the working area (it can be covered by the hands of the master, other building elements in the structure). The product is sold without a battery, but has an insert for a case and one bit.

Customers in reviews love the narrow and elongated shape of the screwdriver, which makes it easier to access confined spaces, such as when assembling furniture. At the same time, the body length is 251 mm, so it will be possible to install the fasteners by inserting the cartridge between other building partitions, and not immersing the entire tool inside the structure.

Advantages

  • convenient trigger for several fingers;
  • clip for hanging;
  • bits do not fall out of the cartridge;
  • relatively light – 1.6 kg.

disadvantages

  • sold without battery;
  • the backlight comes from the bottom, so sometimes it is not enough.

Makita DDF083Z 40 Nm

Rating: 4.7

Makita DDF083Z 40 Nm

Completing the category of brushless screwdrivers is another model from Makita. It is sold at a better price, but does not come with a battery and charger. The device has two operating speeds to quickly switch between processes on materials of different density. The spotlight lamp is located under the socket and shines exactly in the working area. The screwdriver weighs only 1.1 kg. Powered by an 18 V battery makes this “baby” very powerful. In the reviews, the masters are satisfied with the comfortable grip of the brushless tool and the fact that it does not get warm during prolonged use.

This is another of the shortest Makit screwdrivers, having a length of 124 mm, which makes it easy to access and screw fasteners in the most inconvenient places. Unlike other compact brushless models, the tightening force is even greater here at 40 Nm, so the machine can handle screws 60-80 mm long.

Advantages

  • rubberized body;
  • two speeds of work;
  • weighs 1.1 kg;
  • quick hanging on the belt.

disadvantages

  • no battery included;
  • inconvenient to rotate the tightening adjustment ring;
  • sometimes you can accidentally hit the reverse.

Best brushless drills

The brushless drills are equipped with a chuck capable of holding both bits and drills. The dimensions are larger due to the chuck, but the power tool has an increased tightening force. This expands the range of applications of the equipment and makes it more versatile for carpenters, furniture assemblers, plasterboard installers, etc.

Milwaukee M18 FDD-502X 135 Nm

Rating: 4.9

Milwaukee M18 FDD-502X 135 Nm

The Milwaukee M18 FDD-502X brushless drill comes first. Thanks to the 24-step adjustable torque ring, it can be used as a screwdriver. The three-blade chuck is capable of clamping drills with a diameter of 1.5-13 mm. The tool weighs 2.5 kg. It has two speeds with a range of 0-550 and 0-2000 rpm. The set already contains two batteries 5.0 A / h with a voltage of 18 V. The time for a full charge is only 1 hour. You can control the degree of discharge by three diodes on the side. Keyless chuck simplifies tool changes. Reviews show that the T-body screwdriver fits comfortably in the hand and does not slip even in hot weather. Redlink Plus electronic protection prevents the screwdriver winding from burning out in case of overload.

This brushless model stands out with a torque of 135 Nm, one of the largest in the category. This drill can handle drilling in steel and wood without significant effort. The second handle facilitates pushing and increases productivity.

Advantages

  • there is a battery capacity indicator;
  • anti-slip handle;
  • two speeds of work;
  • The chuck is designed for drills with a diameter of 13 mm.

disadvantages

  • high price;
  • no kick function.

Metabo BS 18 LTX BL I 5.2Ah x2 Case 120 Nm

Rating: 4.8

Metabo BS 18 LTX BL I 5.2Ah x2 Case 120 Nm

This brushless drill is only slightly inferior in screwing force to the previous one – the maximum tightening torque is 120 Nm versus 135. The product is delivered in a plastic case with a charger and two 5.2 A / h batteries. In the reviews, the owners are happy with how long the screwdriver holds a charge. It is impossible to achieve two discharged batteries with alternate use. Keyless chuck of the screwdriver is able to fix drills and bits in diameter from 1.5 to 13 mm. Two speeds with a switch on the top are convenient for easy transition from one mode to another. The maximum rotational speed is 1850 rpm. The spindle locks in here, making tool changes even easier.

This drillable screwdriver features a safety clutch. If the drill gets stuck in the material, the chuck will disengage from the brushless motor shaft to avoid damaging the key assembly.

Advantages

  • powerful maximum tightening torque 120 Nm;
  • 3-year manufacturer's warranty;
  • high bump stop on the additional handle;
  • keyless chuck.

disadvantages

  • high price;
  • if you often use a drill in the cold, then the capacity of the battery decreases.

Makita DHP481RTE 115 Nm

Rating: 4.7

Makita DHP481RTE 115 Nm

And here is a brushless drill-screwdriver from “Makita”, powered by a voltage of 18 V and untwisting the rig up to 2100 rpm. The speeds can be controlled using a switch on top. In addition to drilling and tightening fasteners, there is a hammer drilling function. The frequency of the latter reaches 31,500 per minute. The tightening force can be set in one of 21 positions. In the reviews, the owners are satisfied with the roomy suitcase, which also allows the carcass from the grinder to be transported in it. This allows you to transport the main tools for work in one case and not forget anything.

This brushless drill / driver stands out for its short length of 205 mm and an impressive torque of 115 Nm. Due to its compact dimensions, the tool is convenient to climb into hard-to-reach places. Whenever you need to use the full power of the brushless motor, an extra handle is provided to push the machine harder. But unlike other models, the handle is carried out on a long bar that does not block the operator's view, which is what the masters like in their reviews.

Advantages

  • there is a case and a charger;
  • drilling depth limiter is provided;
  • there is a kick function;
  • battery charging in 45 minutes.

disadvantages

  • high price;
  • the weight of 2.7 kg is already heavy for long-term use.

DeWALT DCD996P2 820 W 95 Nm

Rating: 4.7

DeWALT DCD996P2 820 W 95 Nm

The screwdriver operates on 18 V and includes two 5.0 A / h batteries. The brushless machine is capable of simply drilling and doing it with a blow. The frequency of the latter reaches 38250 per minute. Spindle rotation at maximum is 2250 rpm. The tightening force is adjustable up to 95 Nm. The chuck is capable of clamping tooling with a diameter of up to 13 mm. All customers in the reviews like the tightening torque regulator, equipped with rubber raised lugs. It is convenient for them to use both with and without work gloves.

The brushless tool is notable for a 3-speed gearbox, which can be switched by a three-position slider located at the top of the body. This allows you to quickly switch from drilling soft to hard materials or fastening screws. If you often have to switch from one installation process to another, take a closer look at a three-speed screwdriver.

Advantages

  • convenient setting of the tightening torque;
  • rubberized body;
  • additional handle;
  • blocking the start key.

disadvantages

  • the backlight diode for some shines by;
  • the battery is weakly attached to the handle;
  • there is no place in the case for storing drills;
  • poorly drills concrete.

AEG BSB 18CBL LI-402C 75 Nm

Rating: 4.6

AEG BSB 18CBL LI-402C 75 Nm

The brushless drill from AEG is equipped with two batteries with a capacity of 4.0 Ah and a voltage of 18 V. The tightening torque has a maximum of 75 Nm. Two speeds make it easy to transition between processes. Maximum rotation is reached at 2100 rpm. The screwdriver is able to handle old fasteners thanks to its 27,500 impact function per minute. The manufacturer has provided electronic overload protection. The keyless chuck holds drills with diameters from 1.5 to 13 mm. In the reviews, the masters are pleased that the rubber pads on the handle are equipped with additional pimples that increase grip on the skin on the hands. There is also a charging indication and a backlight with a delay function.

Among the brushless drills that can work as a screwdriver, this model stands out for one of the shortest bodies of 193 mm combined with a tightening torque of 75 Nm. Use the product to make fasteners in narrow niches or wherever the tool needs to be turned 90 degrees.

Advantages

  • copes with all the tasks of assembling partitions;
  • two speeds of work;
  • there is a second handle;
  • rubber pads have additional relief.

disadvantages

  • there is no clip for quick hanging;
  • the cartridge has a slight backlash;
  • the second handle scratches the gear case.

BOSCH GSR 18 VE-EC 5.0Ah x2 L-BOXX 75 Nm

Rating: 4.5

BOSCH GSR 18 VE-EC 5.0Ah x2 L-BOXX 75 Nm

And here is another brushless drill / driver with a body length of 198 mm. The product is completed with a capacious suitcase, two batteries and a charger. The screwdriver weighs 2.2 kg. The maximum spindle speed reaches 2000 rpm, but there is no impact function here. The three-jaw chuck is capable of gripping drills up to 13 mm in diameter. Reverse and fixation of the spindle is available to the user. The electronic system monitors the operation and switches off the device in case of overload. The speed control is achieved both by pressing the button and using a 2-position switch. The torque setting has 21 positions with a maximum of 75 Nm.

This is another brushless screwdriver with an extra-handle extended tripod. Thanks to this design, the master sees the working area better, and it is much more convenient to hold the tool itself. If comfort is a priority for you, then pay attention to this brushless model.

Advantages

  • there is overload protection;
  • fixing the tool on the belt;
  • illumination of the working area;
  • convenient setting of the twisting force.

disadvantages

  • high price;
  • there is no impact function.

DeWALT DCD791D2 70 Nm

Rating: 4.5

DeWALT DCD791D2 70 Nm

The DeVolt line includes one of the smallest hammerless drills with a brushless electric motor – DCD791D2. The model has two speeds and a tightening force of 70 Nm. Together with it, the manufacturer supplies two 18 V batteries with a capacity of 2.0 A / h, which have no “memory”. You can charge them at any time and to any level. The spindle rotates at a maximum of 2000 rpm. In the reviews, buyers report that the product comes with a sealed case, confirming the integrity of the factory complete set and the originality of the parts used. The screwdriver is also praised for its reliable bracket, so that it does not fall out of the belt when you try to sit down or climb on a ladder.

This model beats others in terms of length 175 mm and weight 1.5 kg, despite the fact that it can accommodate drills with a diameter of 13 mm. This compactness allows the brushless screwdriver to be used in very confined spaces, such as in the engine compartment of a car.

Advantages

  • comfortable to hold in hands thanks to the weight of 1.5 kg;
  • able to tighten even self-tapping screws with a length of 120 mm;
  • high-quality assembly without backlash;
  • keeps well on clothes at the time of squatting.

disadvantages

  • sometimes it is difficult to hold a small tool in your hands at the moment of tightening (trying to break free);
  • the petals of the cartridge do not close completely;
  • the clamping mechanism sometimes “bites”.

Makita DF332DWAE 35 Nm

Rating: 4.4

Makita DF332DWAE 35 Nm

In the penultimate place is a brushless kid with a rubberized handle and a quick-release chuck. It has a two-speed gearbox and reverse. Fastener screwing hardness adjustment has 20 steps. The illumination directly under the chuck is not obscured by the user's hands and is directed exactly to the working area. The kit already contains two batteries 2.0 A / h. The maximum rotational speed is reached at 1500 rpm. For long-term operation, the start button can be locked to relieve stress on the hand.

The brushless model is notable for a weight of 1 kg and a length of 154 mm, but its power is inferior to those described above due to the power supply from the battery 10.8 V versus 18 V, so the tightening torque is only 35 Nm. Another compact screwdriver is able to clamp shanks with a maximum diameter of 10 mm, which is also below the rating of the leaders in the review. We recommend using this drill for repairing household appliances, since the tool fits easily inside the case of a washing machine, refrigerator or microwave oven.

Advantages

  • rich equipment;
  • two speed modes;
  • easy to manipulate;
  • built-in backlight.

disadvantages

  • there is no impact function;
  • clamps only drills up to 10 mm in diameter;
  • during intensive use, the spindle may fall out of the spilled chuck.

BISON DAI-18-2-Li KNM4 60 Nm

Rating: 4.3

BISON DAI-18-2-Li KNM4 60 Nm

The review is completed by a brushless model from the Zubr brand, which is powered by 18 V and generates 60 Nm of tightening torque. The screwdriver has two speeds and reverse. The manufacturer has installed overload protection. The device weighs 1.7 kg. In the reviews, buyers are satisfied that the gearbox housing is made of metal. This improves heat dissipation and allows you to use the brushless tool for longer during the day. The chuck here is a quick-release type and is also made of steel. It is capable of fixing rigs up to 13 mm in diameter. Craftsmen share that “wood grouses”, 200 mm long, he twists into a bar without much effort. But the wrist strap is flimsy here and it is better not to wear it, otherwise it may break off and the instrument will fall from a height.

We considered the screwdriver with the ability to drill the best in terms of price-performance ratio. This is one of the most affordable brushless models with a tightening rigidity of 60 Nm and immediately everything you need in a set for operation.

Advantages

  • light weight 1.7 kg;
  • there is electronic overload protection;
  • fast charging in 60 minutes;
  • backlight with delay;
  • a charge indicator is provided.

disadvantages

  • the chuck does not grip drills with a diameter of less than 2 mm;
  • battery capacity is only 1.5 A / h;
  • flimsy wrist strap;
  • gear shifting is carried out with a crunch;
  • the handle has a holder for only one bit.


Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment