13 best manufacturers of steel bathtubs

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

In the modern plumbing market, fierce competition continues between cast iron, steel and acrylic bathtubs. Each of these species is in steady demand among the population. Steel baths have been made for a long time, users have managed to identify the strengths and weaknesses of these products. Many manufacturers have seriously worked on the shortcomings, which has increased the number of fans of steel models. The consumer is offered a wide selection of models of imported and domestic production. Expert advice will help you find the most suitable bath.

Recommendations for choosing a steel bath

Material. The following materials are used for the manufacture of steel baths.

  1. Despite its positive qualities, stainless steel has not found wide application due to its high price. The disadvantages of experts include the loss over time of a presentable appearance. Of the strengths, it should be noted absolute safety for humans and resistance to corrosion.
  2. Structural steel is considered the main material for making bathtubs. To protect the product from rust, manufacturers cover the surface with a layer of enamel. In addition to preventing corrosion, enamel makes bathroom maintenance simple and convenient. It is only important to maintain the integrity of the protective coating.

Wall thickness and weight. When choosing a bath, you need to pay attention to two interdependent parameters.

  1. The thickness of the steel sheet that the manufacturer used to make the bath affects the strength and reliability of the structure. Usually this figure is in the range from 2.5 to 4.0 mm. If users have an average weight, then it would be optimal to buy a bath with a wall thickness of 3 mm. Large people are better off choosing a model made of steel 3.5-4.0 mm. Otherwise, during bathing, deformation of the bowl may occur, which will eventually lead to delamination of the enamel.
  2. However, the thicker the sheet, the heavier the sanitary ware becomes. If the bathroom is very small, then only strong installers can install a bath with a large weight.

Bowl shape. Meeting consumers halfway, manufacturers produce several popular bowl shapes.

  1. Rectangular models are considered classics, which are most convenient for bathing an adult.
  2. Round baths are bought by discerning users, who select plumbing fixtures for the interior of the room and their needs.
  3. Oval designs successfully combine practicality and aesthetics. They fit perfectly into the classic style due to the softness of the shapes and the absence of corners.
  4. Corner baths will be an excellent solution to the problem of cramped spaces. But when buying a model with such a shape, it is important to take into account several nuances. Designs are symmetrical and asymmetrical, right and left-handed.

Colour. To make the bath fit into the interior of the room, it is important to guess the color.

  1. Traditional white bathtubs are considered a versatile option that suits many styles.
  2. Blue is associated with the element of water. In such a bath, the user will feel serene and calm.
  3. Green color contributes to maximum relaxation of a person while bathing.
  4. The yellow bath not only calms and relaxes, but also fills the wearer with a charge of vivacity.
  5. The red bowl gives a person a sense of security. Bathing improves blood circulation and metabolism.

Insulation. To eliminate such disadvantages of a steel bath as noise and rapid cooling of water, manufacturers apply a layer of insulation to the outer surface. For this, thin modern materials are used, which are mounted with glue.

We have selected 13 best steel bath manufacturers for our review. Their products are widely represented in the trade network of our country. When distributing places in the rating, the opinion of the expert community and reviews of Russian users were taken into account.

Rating of the best manufacturers of steel baths

Nomination a place manufacturer rating
Rating of the best manufacturers of steel baths 1 Milldue 5.0
2 Roca 4.9
3 KALDEWEI 4.8
4 BETTE 4.7
5 LAUFEN 4.6
6 Jika 4.5
7 Noken 4.4
8 GALA 4.3
9 Estap 4.2
10 Reimar 4.1
11 White wave 4.0
12 Koller pool 3.9
13 Donna vanna 3.8

Milldue

Rating: 5.0

Milldue

The Italian company Milldue strictly follows its main goal – to bring unique projects to life using modern materials. From the first days of its activity (since 1976) the company was engaged in the production of bathroom furniture. Already in the year of its foundation, the company took part in the SAIE exhibition, where it made a splash. In the 90s, the manufacturer focused on the design and manufacture of steel bathtubs, shower trays and sinks. Today the company skillfully combines manual labor with automated equipment. The wide variety of collections pushed the firm to create brands such as Noorth and Vitage.

The experts gave the palm to the brand for innovation and originality. Users say the only drawback is the high price.

Advantages

  • own developments;
  • a combination of manual labor and automatic lines;
  • quality materials;
  • variety of collections.

disadvantages

  • high price.

Roca

Rating: 4.9

Roca

The Roca brothers founded the Spanish company Roca in 1917, which today occupies a leading position in the bathroom furniture industry. The concern includes 78 enterprises and 170 representative offices in different parts of the world. Experts drew attention to the constant renewal of collections, where steel bathtubs take the leading place. The manufacturer cares about the comfort and safety of users, so the bowls are large, comfortable handles and a bottom with an anti-slip coating. Numerous know-hows did not go unnoticed by specialists, for which the brand gets the second place in the ranking.

Domestic users in reviews praise Roca steel bathtubs for affordable prices, high quality, a wide selection of shapes and sizes. Anti-slip coating spoils the appearance somewhat.

Advantages

  • regular updating of collections;
  • comfort and safety;
  • ease of use;
  • quality workmanship.

disadvantages

  • humble design.

KALDEWEI

Rating: 4.8

KALDEWEI

The German company KALDEWEI specializes in the production of steel baths. Experts point out that all products are manufactured in Germany. Therefore, the quality of the baths is beyond doubt. Throughout its history, the brand has won more than 150 awards and prizes in the design category. The manufacturer managed to achieve such results thanks to close cooperation with renowned design studios. The catalog contains the largest baths (volume 206 l) and the lightest models (50 kg). For German quality, thoughtful designs and aesthetics, the brand receives the bronze in our rating.

Domestic consumers praise KALDEWEI steel bathtubs for their beautiful shapes, a variety of sizes, and a comfortable back support. Among the shortcomings, there is a small selection of colors and a high price.

Advantages

  • aesthetics;
  • variety of sizes;
  • comfortable support for the back;
  • durability.

disadvantages

  • high price;
  • a modest selection of colors.

BETTE

Rating: 4.7

BETTE

Since 1952 the German company BETTE has been operating on the European market. She specializes in the manufacture of bathroom furniture. A distinctive feature of the brand is the use of glazed coated titanium steel. Thanks to the unique technology, the manufacturer manages to create original products that have different shapes, sizes and colors. The experts praised the 30-year warranty, which speaks of the durability of the product. Many collections have received prestigious awards for their modern design (Red Dot Design Award, Interior Innovation Award, MIAW Awards). The brand is on the fourth line of the rating.

On thematic forums, models with a circular support surface are most discussed, which take up minimum space in cramped rooms. Of the minuses, there is a high price.

Advantages

  • rich assortment;
  • unique materials;
  • modern design;
  • durability.

disadvantages

  • high price.

LAUFEN

Rating: 4.6

LAUFEN

The roots of the Swiss company LAUFEN go back to 1878, when the first workshops were built. But even then the company tried to automate the production of bathroom furniture. The basis for the quality of steel baths has been formed in the markets of Austria, Czech Republic and Switzerland. Today the manufacturer specializes in premium products. Customers are offered both freestanding bathtubs and built-in models. The experts appreciated the presence of noise-insulating coating in the steel bathtubs. But the company does not shine with a variety of forms, which was reflected in the final position in our rating.

The strengths of LAUFEN bathtubs are high quality, effective sound insulation and durability. Of the minuses, one shape (rectangular) and the poverty of colors can be distinguished.

Advantages

  • high quality;
  • reliable sound insulation;
  • durability;
  • stable demand.

disadvantages

  • one form;
  • one color (white).

Jika

Rating: 4.5

Jika

The company from the Czech Republic Jika amazed the experts with a successful combination of tradition and quality. The brand's production sites are located in the small towns of Znojmo and Bechin. The buyer is offered a wide range of sanitary ware and accessories. The company demonstrates a high level of social responsibility, baths are equipped with special devices to facilitate bathing for pensioners and people with disabilities. The combination of advanced technologies and modern materials allowed the brand to get into the TOP-6 of our rating.

The users liked the anatomical shape of the bathtubs from the collections of Tanza, Riga, Praga, Alma. Of the minuses, one should highlight the unsuccessful blocking of the drain and inconvenient sides.

Advantages

  • modern design;
  • high quality;
  • thoughtful designs;
  • Hi-tech.

disadvantages

  • incomplete drain;
  • uncomfortable sides.

Noken

Rating: 4.4

Noken

The Spanish company Noken makes high demands on its products. It specializes in the production of premium bathroom fittings. The range of the brand includes steel bathtubs, faucets, fittings, accessories and furniture. All products have environmental certificates, they save electricity and water resources. The experts highly appreciated the collaboration of the firm with the advanced European designers. This was one of the main reasons for getting into our rating. In addition, experts pay attention to the developed dealer network, which includes more than a hundred countries around the world.

Users also draw attention to the sophisticated style and functionality of steel bathtubs in reviews. The disadvantages include a modest lineup and high prices.

Advantages

  • high quality;
  • environmental friendliness;
  • energy efficiency;
  • stylish design.

disadvantages

  • high price;
  • modest lineup.

GALA

Rating: 4.3

GALA

Another Spanish manufacturer of steel bathtubs made it to our rating. GALA has been operating in the European sanitary ware market for over 50 years. Experts consider a unique style to be a distinctive feature of the brand. Thanks to high performance and modern design, the products find buyers all over the world. The manufacturer boasts a wide range of products with symmetrical shapes. The brand ranks eighth in our ranking.

So far, domestic users have little experience in the use of steel baths GALA. The owners are pleased with the harmonious shapes, quality workmanship and original style. Potential buyers are stopped by the high price and shortage of products in the Russian retail network.

Advantages

  • modern design;
  • high performance;
  • harmonious forms;
  • high quality.

disadvantages

  • high price;
  • a modest assortment in stores.

Estap

Rating: 4.2

Estap

Estap, a young company from Slovakia, relies on the uniqueness of its products. One of the highlights of the brand is the application of powder paint to the steel bath, which provides reliable protection against corrosion. The high quality of Slovak products is confirmed by international certificates ISO 14001, ISO 9002. The catalog contains 9 collections, which are offered in 13 colors and 140 modifications. The Exclusive series, consisting of 7 hydro-massage baths, aroused particular interest among the experts. Branded LED backlighting will not remain unnoticed by users.

The low place in the rating is explained by not the most successful forms, as well as by the unstable position of the baths during installation. Therefore, you have to independently strengthen the legs and foam the perimeter.

Advantages

  • affordable prices;
  • powder paint coating;
  • branded LED lighting;
  • high quality.

disadvantages

  • unsuccessful forms;
  • unstable position.

Reimar

Rating: 4.1

Reimar

The Russian steel bath manufacturer Reimar is famous for its three-layer “pie”. Many years of experience have proven the effectiveness of the Three-Ply Technology system, which harmoniously combines a steel layer with a safe polymer coating and glassy enamel. The result is a smooth, snow-white surface that retains its properties for many years. The manufacturer gives a 15-year warranty for its products. The experts liked the large thickness of the baths (6 mm) and the high resistance to biological damage. The brand is in the top ten of our rating.

Users have a few serious complaints about Reimar steel bathtubs. This lack of structural rigidity and a tendency to scratch. The pluses include affordable prices and low weight.

Advantages

  • unique protection against corrosion;
  • perfect smoothness;
  • affordable prices;
  • resistance to biological damage.

disadvantages

  • lack of rigidity;
  • tendency to scratch.

White wave

Rating: 4.0

White wave

The Kazakh company Santekhprom produces steel bathtubs and shower trays under the White Wave brand. The plant has been operating since 1960, having gone through more than one modernization. The manufacturer managed to preserve human potential, thanks to which it was possible to reach a new technological level. Experts highly appreciated the availability of quality certificates for the entire range of products, a wide range of models, and constant staff training. For structural strength, dazzling whiteness and optimal price-quality ratio, the brand gets into our rating.

The owners of White Wave steel bathtubs are satisfied with the affordable price, light weight and snow-white color of the coating. But the coating is easily damaged and the bathtub makes a lot of noise when filled with water.

Advantages

  • affordable price;
  • light weight;
  • a wide range of;
  • beautiful coating.

disadvantages

  • tendency to scratch;
  • sonority.

Koller pool

Rating: 3.9

Koller pool

Among budget steel baths, the attention of experts was attracted by the products of the Ukrainian company Koller Pool. The manufacturer offers about 10 collections at affordable prices. Standard rectangular bathtubs, as well as models with a seat, are available to the Russian consumer. You can also choose the thickness of the bowl (2.5 mm, 2.8 mm or 3.5 mm). Experts pay attention to the fact that the warranty period for products depends on the thickness of the bath (10 or 30 years). The specialty of the company is a miniature bathtub 1050 mm long and 700 mm wide. It is of great interest to customers.

The trade mark is included in our rating for reasonable prices, nice colors, interesting design. Domestic users have found such disadvantages as unstable coating and difficulties with installation in steel Koller Pool bathtubs.

Advantages

  • affordable prices;
  • variety of models;
  • interesting design;
  • the presence of legs and handles.

disadvantages

  • unstable coating;
  • complex installation.

Donna vanna

Rating: 3.8

Donna vanna

The Russian company Donna Vanna closes our rating of the best manufacturers of steel bathtubs. The products are manufactured at the Verkh-Isetsky Metallurgical Plant, which has been operating since 1726. The production of steel baths was established in 1993. Today, the enterprise boasts modern equipment, which makes it possible to produce high quality products at an attractive price. The experts liked the mounting structure with support stand. A special antibacterial additive is introduced into the enamel, which prevents the growth of microorganisms.

In reviews, users praise Donna Vanna baths for their ease of care and rich colors. The disadvantages include the leakage of the drain plug, ineffective sound insulation and poor fastening of the legs.

Advantages

  • low price;
  • variety of colors;
  • antibacterial enamel;
  • ease of use.

disadvantages

  • ineffective noise insulation;
  • weak attachment of the legs.


Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment