12 best wall chasers

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Wiring a house with concrete or brick walls is one of the dirtiest and most time consuming jobs. Similar problems lie in wait for homeowners who want to hide the plumbing in the wall or floor. To alleviate the fate of installers, as well as to reduce the pollution of premises, wall chasers or furrow makers are capable of. These devices allow you to get neat grooves where different communications are completely hidden. Thanks to the diamond discs, the cut is of perfect quality, and by connecting the vacuum cleaner to a special nozzle on the casing, you can collect all the debris even at the stage of formation of the groove. Today, this type of electric tool is widely represented in the domestic market. In order to choose the most suitable wall chaser, experts advise you to pay attention to the following parameters.

How to choose a wall chaser

1. Disc diameter. One of the defining moments when choosing a wall chaser is the diameter of the disc to be installed. The larger it is, the deeper it will be possible to make the groove.
2. Power. As the disc size increases, so does the engine power. It is advisable that the electric motor has some reserve, otherwise the tool will often overheat and shut down.
3. Appointment. When purchasing a device, it is important to consider the frequency of its use. For major repairs in one or more rooms, a budget chasing cutter is suitable. But builders who use the device on a daily basis choose professional models, despite the high cost.
4. Design. Structurally, single-disc and multi-disc chasing chasers are distinguished. A single disc device produces a groove with the same width. And in two-disc models, the cutting width can be adjusted. However, in this case, the groove is not always completely cleaned of concrete, which requires additional labor costs.
5. Functionality. The functional content may not worry too much for amateur craftsmen. But when using a wall chaser for several hours, the operator will immediately feel the advantage of devices with a soft start, electronic speed control, an anti-vibration system, and overload protection.

Our review includes 12 of the best wall chasers. When selecting applicants, the opinion of experts and feedback from builders was taken into account.

Rating of the best wall chasers

Nomination	a place	Name of product	price
The best wall chasers with a disc diameter of 125 mm	1	Metabo MFE 40	22 402 RUB
	2	AEG MFE 1500	RUB 24 699
	3	Hitachi CM5SB	RUB 9 636
	4	Fiolent B2-30	RUB 5,630
Best wall chasers with a disc diameter of 150 mm	1	Messer T1455	16 150 rub.
	2	Makita SG150	RUB 40,992
	3	Hammer STR150	RUB 6,500
	4	ZUBR ZSH-1500	RUB 7 709
The best wall chasers with a blade diameter of 230 mm	1	BOSCH GNF 65 A	RUB 51 592
	2	Hitachi CM9UBY	RUB 19,962
	3	ZUBR Shtroborez (furrower) ZSH-P65-2600 PVSTK	RUB 12,460
The best wall chasers with a blade diameter over 300 mm	1	Makita 4114S	RUB 39,999

The best wall chasers with a disc diameter of 125 mm

For sawing small and neat grooves in concrete or masonry structures, a 125 mm diameter wall chaser is suitable. Most often, such devices can be seen in the hands of electrical wiring installers. The experts selected several effective devices.

Metabo MFE 40

Rating: 4.9

The Metabo MFE 40 professional wall chaser is a powerful and reliable device for quickly producing furrows with a depth of 10-40 mm in concrete or brick substrates. The model is ahead of its closest competitors in a number of key parameters, winning in our rating. The powerful 1.9 kW electric motor allows you to set the maximum slitting speed, varying the groove width from 9 to 35 mm. During operation, the electronics maintains a predetermined number of revolutions, making the advance even. A critical load is signaled by an LED indicator. Soft start and automatic overload clutch are responsible for the safety of work.

Users note ease of use, the ability to connect to a vacuum cleaner, stability during strobing.

Advantages

• convenient adjustment of the depth and width of the groove;
• light weight;
• high-quality assembly;
• high performance.

disadvantages

• high price.

AEG MFE 1500

Rating: 4.8

The capabilities of the AEG MFE 1500 wall chaser look somewhat more modest. The model is inferior to the rating winner in the maximum depth (30 mm) and width (26 mm) of the groove, power (1.5 kW), and the absence of electronic maintenance of constant speed. The performance of the device was achieved due to the high rotation speed (9500 rpm). Experts speak positively about the convenience of work. For operator comfort, a smooth start is provided, an additional handle is attached, and a reliable protective cover is installed. A vacuum cleaner can be connected to the device in order to immediately remove the dust generated during the chasing process.

Builders are pleased with the compactness and ease of use of the wall chaser. Users call the disadvantages of the device a lack of power and an overpriced price.

Advantages

• compactness;
• ease of use;
• smooth start;
• maneuverability.

disadvantages

• insufficient power;
• high price.

Hitachi CM5SB

Rating: 4.7

The best combination of price and quality can be found in the Japanese Hitachi CM5SB wall chaser. It is ideal for making grooves up to 30 mm deep and 34 mm wide. Experts point out two important advantages of the model. Structurally, the device stands out among the competitors by its single-disk equipment. The operator does not have to remove concrete or brick that remains between two cuts. The second plus of the device is lightness. With a weight of 2.9 kg, furrows can be made tirelessly on ceiling panels. The manufacturer took care of the operator's comfort by making an ergonomic handle with soft inserts.

Experienced craftsmen, along with positive qualities, discovered a significant drawback. The device is not equipped with rollers, which makes chipping in brickwork an inconvenient task. The model is ranked third.

Advantages

• lightness and maneuverability;
• ergonomics;
• affordable price;
• good build quality.

disadvantages

• there are no videos.

Fiolent B2-30

Rating: 4.6

To carry out repair work in an apartment or house on your own, an inexpensive domestic wall chaser Fiolent B2-30 is suitable. The two-disc device is capable of making high-quality grooves with a maximum size of 30×30 mm. Despite its availability, the device is not inferior to competitors in such parameters as power (1.6 kW), stepless adjustment of the depth and width of the cut, soft start, start button lock, additional handle. The manufacturer also thought about the safety of his product, equipping it with protection against overheating and accidental start, a reliable casing.

The builders have some complaints about the operation of the device. They are unhappy with the short power cord, the inconvenient handle for securing the casing. Therefore, the slitting depth is limited to 25 mm. The model does not make it into the top three of the rating.

Advantages

• low price;
• overload protection;
• smooth start;
• power.

disadvantages

• poor casing fastening design;
• short wire.

Best wall chasers with a disc diameter of 150 mm

It is possible to mount electrical wiring, hide water supply in walls and floors using universal wall chasers. They are equipped with saw blades with a diameter of 150 mm. Here are the top representatives in this category.

Messer T1455

Rating: 4.9

High power, unique 5-disc design and reasonable price allowed the Messer T1455 wall chaser to prevail in our ranking. The cutting depth is adjustable from 1 to 42 mm and the maximum slot width is 38 mm. Water is supplied to the cutting zone to extend the life of the diamond blades. This is especially true given the high power (2.5 kW) and the high speed (8500 rpm). The manufacturer has thoroughly thought over the anti-vibration system, so even with prolonged work, the operator does not get tired.

Professional builders speak flatteringly about power, democratic price, ease of use. The weak point in the device is the design of the dust separator, which is especially felt when using a disc with a diameter of 150 mm.

Advantages

• high power;
• high-quality cut;
• anti-vibration system;
• ease of use.

disadvantages

• ineffective dust removal;
• heavy weight (8.5 kg).

Makita SG150

Rating: 4.8

The reliable and durable Makita SG150 wall chaser falls short of the winner in performance and price. The model is equipped with a 1.8 kW motor, which in combination with two cutting discs allows obtaining a furrow up to 45 mm deep and up to 35 mm wide. The strengths of the device are considered by experts to be high comfort and convenience for the operator during operation. The device weighs a little (5.7 kg), has a soft start system, and has a spacious case for transportation. An anti-vibration pad on the handles reduces the impact of the powerful tool on the user's hands. The kit includes intermediate rings, a finger and a wrench, but the discs will have to be purchased separately.

Builders are satisfied with the ease of movement, precise adjustment of the cutting depth, and the presence of an overload indicator.

Advantages

• convenience and comfort;
• light weight;
• good casing;
• reliability.

disadvantages

• high price;
• it is difficult to make vertical grooves.

Hammer STR150

Rating: 4.7

The perfect combination of power (1.7 kW), lightness (5.5 kg) and equipment is available in the Hammer STR150 wall chaser. The model is easy to use due to the presence of a soft start and maintaining constant speed. The manufacturer has provided protection against accidental activation. Another important advantage of the device is the 5-year warranty, which confirms the high quality of workmanship. The metal casing provides reliable protection of the operator from dust and debris. The maximum groove depth is 43 mm, and the width can be adjusted in the range of 1-30 mm.

Users find this wall chaser to be a convenient and reliable tool. It can be seen in the hands of electricians and plumbers. Of the shortcomings, the low efficiency of the dust removal system is often mentioned, even when a construction vacuum cleaner is connected.

Advantages

• affordable price;
• 5-year warranty;
• ease;
• rich functional content.

disadvantages

• dust is poorly removed.

ZUBR ZSH-1500

Rating: 4.6

The ZUBR ZSH-1500 wall chaser has not the highest power (1.5 kW) among competitors. However, the device is capable of making a decent furrow (45×45 mm) in concrete and brick foundations. Therefore, the model is perfect for the role of a universal tool, allowing you to mount both electrical networks and plumbing. I pleasantly impressed the Russian-Chinese product with a durable aluminum case, while competitors offer traditional plastic. Also, the advantages of the device include low weight (5.9 kg) and the presence of a soft start option. Experts note the convenient design of the saw blade changer.

With all the advantages, the wall chaser is only in fourth place in the rating due to user reviews. They are unhappy with the short cord and the lack of power to handle concrete.

Advantages

• low price;
• durability;
• comfortable grip.

disadvantages

• short cord;
• lack of power for slitting concrete to the maximum depth.

The best wall chasers with a blade diameter of 230 mm

When building new houses or carrying out major renovations in buildings, a tool with a disc diameter of 230 mm is often required. They are powerful yet heavy. Experts paid attention to the following models.

BOSCH GNF 65 A

Rating: 4.9

Wall chaser BOSCH GNF 65 A was created for professional work. You can guess this from the blue color of the instrument and the high price. The engine power (2.4 kW) is enough to make deep grooves up to 65 mm deep and 40 mm wide in concrete or masonry. For comfortable operation, the manufacturer has equipped the device with a soft start, limiting the starting current and a protective cover with keyless adjustment. A wide range of domestic and foreign vacuum cleaners can be connected to the wall chaser. The model is perfectly balanced, the high power did not significantly affect the weight (8.4 kg). Experts gave the German instrument the palm in the ranking.

Professional builders confirm the performance and ease of use of the wall chaser. The cutting depth and width is sufficient for both electricians and plumbers.

Advantages

• power;
• fits with different vacuum cleaners;
• large cutting depth;
• long cord.

disadvantages

• high price.

Hitachi CM9UBY

Rating: 4.8

One of the most powerful (2.6 kW) wall chasers in its class is the Hitachi CM9UBY model. At the same time, the motor is capable of gaining a record speed (6600 rpm). Thanks to these characteristics, the device with one disc is able to make a deep (60 mm) and wide (80 mm) groove in brick or concrete. To operate such a device tirelessly for a long time, the manufacturer made an ergonomic handle with a grooved coating. Important safety elements include a safe shutdown button, a protective cover. The durability of the electric motor ensures efficient ventilation and protection against overheating.

The Japanese wall chaser lost to the winner of the rating in detail. Fasteners can be loosened from vibration, the suitcase is made too large and heavy, the dust extraction is not durable.

Advantages

• high performance;
• wide groove;
• light weight (8.1 kg);
• ease of use.

disadvantages

• the bolts are unscrewed;
• flimsy dust extraction.

ZUBR Shtroborez (furrower) ZSH-P65-2600 PVSTK

Rating: 4.7

High power (2.6 kW) and low price have become the key factors in the popularity of the ZUBR ZSH-P65-2600 PVSTK wall chaser. The manufacturer is so confident in the build quality of its product that it gives the tool an extended 5-year warranty. The furrow cutter can make deep grooves (65 mm) with a maximum width of 40 mm. Of the useful functions, it is worth noting soft start, overload protection and a constant speed control system. This two-disc device is inferior to the leaders of the rating in weight (10 kg).

The users liked the simple stepless adjustment of the cutting depth, effective anti-vibration protection, and effective dust extraction. It is convenient to carry the device together with the accessories in the proprietary case.

Advantages

• high power;
• low price;
• anti-vibration system;
• infinitely adjustable cutting depth.

disadvantages

• great weight.

The best wall chasers with a blade diameter over 300 mm

The deepest cuts can be made by chasers equipped with a saw blade with a diameter of more than 300 mm. With such a device, you need to carefully saw through thin walls and panels so as not to accidentally make a through hole. The experts liked one device.

Makita 4114S

Rating: 4.9

When you need a part deep grooves in concrete or masonry, then you should pay attention to the Makita 4114S single-disc chasing cutter. A powerful device (2.4 kW) is able to sink into the base up to the 125 mm mark. The model is equipped with a diamond blade with a diameter of 355 mm. Smooth start allows you to make a neat cut, and to protect the gearbox and the operator in the event of a disk blockage, a unique drive design with a clutch was invented. The metal cover completely covers the saw blade, the effective dust extraction system allows you to carry out construction work with minimal contamination.

Professional builders prefer the Makita 4114S wall chaser for its deep groove capability. In this case, such parameters as high price and heavy weight (10.3 kg) go to the background.

Advantages

• the deepest cut;
• convenience and comfort in work;
• clutch drive;
• safety at work.

disadvantages

• high price;
• great weight.

---

Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.