12 best tile adhesives

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Tiled materials are widely used in the decoration of residential, industrial and office premises. Since this type of cladding is expensive for property owners, tile adhesive plays a huge role in the durability of the coating. There is a huge range of compounds on the construction market, among them there are universal products and mixtures with narrowly focused specialization. Many domestic and foreign manufacturers are fighting fiercely for the Russian consumer. When it becomes necessary to purchase an adhesive, it is best to consult with a professional tiler who will deal with the design of the facing surface. Otherwise, you will have to choose the material based on the recommendations of experts.

The main criteria for choosing tile adhesive

1. First of all, it is important to determine the operating conditions of the tiled coating. In a bath, shower, sauna, pool, only a composition with high moisture resistance can be used. On terraces, balconies, facades, resistance to low temperatures is also needed. On the contrary, when installing underfloor heating, the glue must withstand high temperatures.
2. An important factor is the ease of preparation of the working solution. Most of the compositions mix well with water, and some modern products are made using a special dust-free technology. The absence of dust has a beneficial effect not only on the cleanliness of the adjacent premises, but also on the health of employees.
3. Tilers are very scrupulous about the behavior of the prepared solution. Good adhesion to the base, plasticity, absence of tile slipping and shrinkage after drying are highly appreciated. It is desirable that the viability of the mixture was at least 2-3 hours, then after a smoke break or tea drinking, you will not have to clean the container from the frozen glue.

Our review includes the best tile adhesives. When selecting candidates, the following criteria were taken into account:

1. the appointment of the composition;
2. specifications;
3. price;
4. expert opinion;
5. consumer reviews.

Rating of the best tile adhesives

Nomination	a place	Name of product	price
Best Tile Bath Glue	1	Knauf fliesen	297 r
	2	Ceresit CM 11 PLUS	304 RUB
	3	UNIS 2000	279 r
	4	OSNOVIT MASTPLIX T-12	284 r
	5	IVSIL MOSAIK	RUB 590
	6	SOPRO 450	650 RUB
	7	BERGAUF MOSAIK	622 RUB
The best tile adhesive for porcelain stoneware	1	Volma Ceramic	233 r
	2	Unis Granite	375 RUB
	3	Bergauf Keramik	199 RUB
The best tile adhesive for underfloor heating	1	LITOFLEX K80	547 r
	2	Mapei Keraflex	845 RUB

Best Tile Bath Glue

In the bathroom, as well as in the shower room, sauna or bath, there is high humidity. Therefore, the tiles should be glued using a waterproof compound. It should hold tiles equally well on the wall and floor. The experts have selected several products.

Knauf fliesen

Rating: 4.9

Knauf Fliesen glue has all the necessary qualities for laying tiles in the bathroom. It is made on a cement basis, therefore it is highly resistant to water, mixes well with water. The material is suitable for bonding ceramics, porcelain stoneware or stone. In reviews, many professional tilers call glue the best at work. The tile does not move, it is quickly fixed on the wall. Experts also note the good adhesion of the adhesive to a variety of substrates, from concrete slabs to plasterboard structures.

Thanks to its affordable price and economical consumption, Knauf Fliesen tile adhesive becomes the winner of our rating. The elastic mass lends itself perfectly to the leveling with a trowel and comb, which allows you to finish the most problematic areas of the bathroom.

Advantages

• moisture and frost resistance;

• high adhesion;

• acceptable price;

• good mixing with water;

disadvantages

• not identified.

Ceresit CM 11 PLUS

Rating: 4.8

According to user reviews, Ceresit CM 11 PLUS tile adhesive does not lag behind the winner. The higher price and lack of versatility (not suitable for some types of tiles) prevented the product from reaching the first line of the rating. But the advantages of the material were highly appreciated by both professional craftsmen and novice tilers. First of all, it is worth noting the possibility of external use. The glue is resistant to moisture and can be applied over a wide temperature range (+5 … + 30 ° C). There are also no problems at the cooking stage, with proper mixing, a homogeneous mass without lumps is obtained. The glue holds well both small and large tiles. The working solution retains its elasticity for about 3 hours, and adjustments in the veneer can be made within 10 minutes.

Advantages

• quality composition;

• plastic;

• good strength and adhesion;

• suitable for ceramics and porcelain stoneware;

disadvantages

• not detected.

UNIS 2000

Rating: 4.7

The UNIS 2000 tile adhesive looks worthy in the top three in the rating. In some respects, the product even surpasses the winner. This applies to drying speed and adhesive properties. The mortar remains viable for 3 hours. The master will have 10 minutes to make changes to the tile coating.

The seam feels confident not only in the humid environment of the bathroom, but also outside buildings in severe frost. High elasticity allows the composition to withstand deformation, changes in humidity and temperature. The glue hardens completely within 24 hours, after which you can walk on the tiles or fill the joints and voids with a joint.

Tile adhesive is advantageous in terms of economy, it has a low price and an acceptable consumption.

Advantages

• dries quickly;

• elasticity of the seam;

• low price;

• good adhesion;

disadvantages

• found in the composition of coarse sand;

• quickly gives off moisture.

OSNOVIT MASTPLIX T-12

Rating: 4.6

When it is necessary to level the wall and glue the tiles in the bathroom in one operation, experts recommend paying attention to the OSNOVIT MASTPLIX T-12 glue. It is the leveling quality that allows the product to successfully compete with the leaders of the rating. The material will not save even with serious surface drops. This fact is not taken from the manufacturer's advertising brochure, it is confirmed in the reviews of professional tilers. Tile adhesive can be used for laying ceramic tiles, porcelain stoneware and stone.

After mixing, the composition acquires good adhesion, the tile does not slide down even with a large thickness of the adhesive seam. The basic thickness can be 20 mm, and in confined areas, depressions up to 30 mm can be leveled.

Advantages

• excellent leveling ability;

• good adhesion;

• universality of application;

disadvantages

• shrinkage of the tiles may occur.

IVSIL MOSAIK

Rating: 4.5

In terms of price and adhesion strength, IVSIL MOSAIK tile adhesive can be classified as a professional material. He often makes top positions in various rankings and lists of tilers. The experts were most impressed by the wide range of finishing materials that can be glued with the composition. Due to its high adhesion and snow-white color, the product is recommended for laying mosaic tiles, translucent and glass elements, natural stone. After drying, the elastic seam is not afraid of moisture and temperature extremes. Therefore, this tile adhesive can be used not only in the improvement of the bathroom, but also in the design of swimming pools, baths and outdoor bases.

The adhesive allows you to lay tiles on concrete, plastered or brick substrates. The viability of the solution is 2-2.5 hours.

Advantages

• high strength;

• snow-white color;

• wide range of applications;

disadvantages

• high price.

SOPRO 450

Rating: 4.5

Tile adhesive SOPRO 450 was created for professional use. It ensures the durability of the cladding, prevents splitting of tile products due to the presence of reinforcing fibers in the composition. The product could not get into the leaders of the rating due to a very thin layer (5 mm) that is allowed to be applied. Although such technical indicators as elasticity and adhesion, the material is at its best.

Experts also note such an advantage of the composition as increased water repellency. The tile adhesive is recommended for use not only in bathrooms, but also in saunas and swimming pools. In addition, external bases such as facades, balconies and terraces can be finished. The prepared solution remains viable for 4 hours, and the seam dries completely only after 672 hours.

Advantages

• seam strength;

• increased water resistance;

• the presence of reinforcing fibers;

disadvantages

• high price;

• thin seam.

BERGAUF MOSAIK

Rating: 4.5

The BERGAUF MOSAIK tile adhesive has been developed especially for the installation of such a capricious facing material as mosaics. Although the manufacturer allows the product to be used for traditional cladding (ceramic tiles, stone, large panels). The white compound can be used when working with marble or translucent mosaics. Professional tilers note high adhesion, ductility and joint strength.

The adhesive composition is easy to prepare, it is pleasant to apply it on horizontal and vertical surfaces, as well as on substrates such as plywood, metal, plaster. This work can be done not only by a professional cladder, but also by a beginner. The manufacturer practically does not limit the scope of application. Only the price discourages domestic buyers.

Advantages

• high adhesion;

• wide scope;

• durable and elastic seam;

disadvantages

• high price.

The best tile adhesive for porcelain stoneware

A special tile material is porcelain stoneware. For its installation, tile adhesive is required, which has high adhesion, plasticity, as well as moisture and frost resistance when decorating external bases. Here are some quality formulations.

Volma Ceramic

Rating: 4.9

An excellent combination of availability and quality was achieved by the domestic developers of Volma Ceramic glue. The cement-sand composition can be used both inside buildings and outside. Within a day, you can move around the laid tiles or seal the seams. The mixture holds both small tiles and large porcelain stoneware panels securely.

Experts gave the product first place in the rating for its excellent adhesion and high plasticity. Tilers note the ease of mixing, as well as a fairly high vitality of about 5 hours. Even heavy elements do not float after gluing, and adjustments can be made within 10 minutes. Tile adhesive should be used on prepared, leveled substrates, since the joint thickness should be 2-5 mm.

Advantages

• profitability;

• easy to apply;

• affordable price;

• prepares quickly;

• good adhesion;

disadvantages

• not found.

Unis Granite

Rating: 4.8

Tile cladding can cope with the highest loads if you use Unis Granite glue in your work. Due to its unique strength, the product took the second line of our rating. It can withstand heavy slabs of materials such as porcelain stoneware and marble. Experts highlight such properties of the adhesive as safety and workmanship. It can be used both inside and outside buildings. The material is resistant to mechanical stress and temperature extremes.

Tilers appreciate the ease of preparation, the plastic mass smooths out all the irregularities on the base well. This tile adhesive is quite versatile; it is used for decorating bathtubs, as well as for installing a warm floor.

Advantages

• high strength;

• safety and environmental friendliness;

• universality of application;

disadvantages

• high price.

Bergauf Keramik

Rating: 4.7

Another Russian glue for porcelain stoneware was included in the top three. Bergauf Keramik composition has won a high position due to its increased elasticity and excellent adhesion. Several factors prevented the product from becoming the winner. It dries longer than its competitors (48 hours). The tiler must have a certain skill, since it will be possible to change the position of the tile only within 7 minutes.

The manufacturer recommends applying a layer of mortar with a thickness of 3-10 mm. It should be noted that the composition is economical. Adhesive consumption for a layer of 1 mm is only 0.83 kg / sq. m. The properties of the seam after complete drying are preserved in a wide temperature range (-50 … + 70 ° C). The product has received a lot of positive reviews from professional tilers.

Advantages

• high elasticity;

• economical consumption;

• excellent adhesion;

disadvantages

• dries for a long time.

The best tile adhesive for underfloor heating

Many adhesives dry out and crack when exposed to high temperatures. Therefore, when installing a warm floor, you should select heat-resistant products. Experts advise paying attention to the following formulations.

LITOFLEX K80

Rating: 4.9

The winner of our ranking among tile adhesives for underfloor heating is LITOFLEX K80. The adhesive mixture of the well-known company Litokol is intended for laying tiles inside and outside buildings. Due to its elasticity and good heat resistance, it is recommended to use it when installing heated floor coverings. Excellent resistance to glue and vertical loads. The scope of the material is wide enough. It can be used to mount ceramic tiles, porcelain stoneware and stone. Moreover, laying tiles on tiles is allowed.

Experts note the greater thickness of the seam (15 mm), which the manufacturer allows. The dust-free composition is easily mixed with water, and the prepared solution can be worked out within 7-8 hours.

Advantages

• heat resistance and elasticity;

• acceptable price;

• safety and environmental friendliness;

• long-term viability;

disadvantages

• high consumption.

Mapei Keraflex

Rating: 4.8

Mapei Keraflex, a popular adhesive composition from Italy, has won acclaim from decorators for its excellent quality and versatility. The product is created on a cement basis using a special Dust Free technology (no dust). A lot of praise can be read on the thematic forums regarding the composition. The high strength of the adhesive mixture allows the installation of large-sized tiles made of ceramics, porcelain stoneware and natural stone. Good adhesion allows tiles to be laid on a wide variety of substrates. And resistance to high temperatures is appreciated by builders when installing underfloor heating.

The product is inferior to the winner in the maximum layer thickness (5 mm) and price. The glue is moisture and frost resistant, which expands the scope of application.

Advantages

• high quality composition;

• heat resistance and moisture resistance;

• no dust when mixing;

• good adhesion;

disadvantages

• high price.

---

Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.