11 best grinders with speed control

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

A wide range of applications in everyday life and production are grinders with speed control. Angle Grinders (UShM) allow you to perform a number of operations, starting with cutting and ending with grinding. The tool is suitable for processing various materials, whether soft plastic or hard concrete. Today on a wide range of grinders with speed control. They differ in both cost and technical parameters. Choose the most suitable model will help recommendations of our experts.

Selection recommendations

Types of angle grinders. All grinders can be divided into 4 groups according to type of food.

  1. The most popular are network machines powered by household network (220 V). They combine affordable price, good power. and rich feature set. But you can only work with the tool in close proximity to an electrical outlet.
  2. Battery energy is also used grinders. They are characterized by mobility and ease of use. However the duration of their work is the smallest.
  3. The largest are gas grinders. They apply with industrial or construction industry where required non-volatility, high power and performance. The downside will be the additional costs of gasoline and consumables materials, as well as high noise.
  4. The pneumatic tool has become a popular tool on the factory floor. Angle grinder. It is characterized by low weight, high rotation speed, noiselessness and fire safety. But such models are expensive, nearby should be a source of compressed air.

Power. One of the main technical parameters grinder is power. It may vary within 0.5 … 3.0 kW. The greater the load is on the machine and the larger the disk, the more powerful the motor should be. In everyday life, most often grinders are used with power from 0.5 to 2.0 kW. In construction industry or manufacturing sector, this figure reaches 3 kW

Rotational speed. In grinders, in addition to the engine, there are gearbox. It is responsible for the spindle speed. The choice of this The parameter depends on the nature of the work performed.

  1. In everyday life, you can successfully use machines with a rotation speed snap up to 7000 rpm.
  2. It is more convenient to polish wooden products at a speed of 7000-11000 rpm
  3. High speed is required to strip the car body Angle grinder (up to 15000 rpm).

Instrument weight. Since the grinder always has to hold in hands, then with prolonged work plays a significant role tool weight.

  1. The lightest models weighing from 1.2 kg are convenient when working on outstretched arms. Duration of work can reach 4 hours.
  2. It is more convenient to work with more powerful and heavy (2-3 kg) machines. on a table or workbench. But after 2-3 hours in humans fatigue builds up.

Additional options. Modern grinders have a number of additional options.

  1. Convenience of movement of the tool together with equipment provides a case.
  2. Reduce engine load in the first moments of work Allows a smooth start.
  3. In order not to keep your finger on the power button during long the operation is performed, the locks are set in the grinders buttons.
  4. Maintaining the desired speed regardless of the load helps electronic speed stabilization system.
  5. Unintended start protection will be useful when online electric current disappears. The tool itself will not turn on when the appearance of tension.

We selected the review of the 11 best grinders with speed control. All of them are sold in the trading network of Russia. When allocating seats the editorial staff of the magazine relied on the opinion of the expert community, given the feedback from domestic consumers.

Rating of the best grinders with speed control

Nomination a place Name of product price
Rating of the best grinders with speed control 1 DeWALT DCG412M2 4.0Ah x2 case, 18 V, 125 mm 22 109 rub.
2 BOSCH GWS 18-125 SL, 1800 W, 125 mm 10 486 rub.
3 Metabo WEV 17-125 Quick box, 1700 W, 125 mm 7 948 rub.
4 Hitachi G15VA, 1500 W, 150 mm 10 199 rub.
5 Makita 9565CVL, 1400 W, 125 mm 8 658 rub.
6 BOSCH GWS 17-125 CIE box, 1700 W, 125 mm 8 120 rub.
7 Metabo WEV 15-125 Quick box, 1550 W, 125 mm 6 840 rub.
8 DeWALT DWE4257, 1500 W, 125 mm 6 977 rub.
9 AEG WS 13-125 XE, 1300 W, 125 mm 6 270 rub.
10 Makita 9565CVR, 1400 W, 125 mm 7 208 rub.
11 BOSCH PWS 1000-125 CE, 1010 W, 125 mm 4 950 rub.

DeWALT DCG412M2 4.0Ah x2 case, 18 V, 125 mm

Rating: 4.9

DeWALT DCG412M2 4.0Ah x2 case, 18 V, 125 mm

The advantage to the master in mobility is given by a rechargeable grinder DeWALT DCG412M2. It can be used for stripping. hard to reach places, grinding, cutting of various materials. Model equipped with a powerful electric motor, which develops up to 7000 rpm. The tool is equipped with two batteries with a voltage of 18 V and capacity 4 Ah. Experts drew attention to the low profile gearbox. For maximum convenience, the manufacturer made rubberized on-off handle. Comfortably carry the product allows a roomy case. Maximum disc diameter is 125 mm, landing size is 22.2 m.

Most users in reviews praise the grinder for lack of wire. Small gear head makes it convenient stripping of welds. The disadvantage of the product is the high price.

Advantages

  • mobility;
  • small gearbox;
  • 2 batteries;
  • capacious case.

disadvantages

  • high price.

BOSCH GWS 18-125 SL, 1800 W, 125 mm

Rating: 4.8

BOSCH GWS 18-125 SL, 1800 W, 125 mm

Among the network grinders, the clear leader is the BOSCH GWS model 18-125 SL. The machine is equipped with a powerful electric motor (1.8 kW), which spins the shaft to 12,000 rpm. Manufacturer equipped his product with a number of useful functions. The grinder is protected from overloads, it has a stabilization system of revolutions and blocking power buttons. Experts appreciated the comfortable grip, making pulling a typewriter out of hands is virtually impossible. Under the off button is located by hand, so at a critical moment will be able to stop the tool motor. But even price superiority did not allow angle grinders to circumvent the winner of the review.

Domestic users liked the power of the device, its equipment, quality assembly. Of the minuses noted difficulty turning on the button.

Advantages

  • high power
  • resourcefulness;
  • multifunctionality;
  • high-quality assembly.

disadvantages

  • it is difficult to turn on the start button.

Metabo WEV 17-125 Quick box, 1700 W, 125 mm

Rating: 4.7

Metabo WEV 17-125 Quick box, 1700 W, 125 mm

The new Metabo Marathon engine is equipped with a network corner machine Metabo WEV 17-125 Quick. Motor is different from predecessor higher torque (50%) and resistance to overloads (up to 20%). Unit power is 1.7 kW, and the speed varies from 2800 to 11000 rpm. To the grinder can be equipped with a maximum diameter of 125 mm and landing size 22.2 mm. Experts noticed good equipment tool. There is a soft start option, overload protection, system stabilization of revolutions. In the asset of the model should be a long wire (4 m). Bulgarian takes an honorable third place in our review.

Russian users are satisfied with power, reliability and ergonomic apparatus. Of the shortcomings, they note the erasure paints on a casing and a reducer.

Advantages

  • powerful motor;
  • long wire;
  • smooth start;
  • speed stabilization.

disadvantages

  • paint is quickly erased.

Hitachi G15VA, 1500 W, 150 mm

Rating: 4.7

Hitachi G15VA, 1500 W, 150 mm

Comfortable and safe operation will provide the operator with a grinder Hitachi G15VA. Experts praised the build quality, built-in ventilation to cool the engine. The model is different simplicity in management, the manufacturer installed a convenient slider switch. On the top of the gearbox protrusions are made, thanks to which the machine is stably located in an inverted condition. The tool is inferior to the leaders in power (1.5 kW), it has There is no SDS quick-release nut and speed control system.

According to the owners, with proper care, the grinder can take a long time serve faithfully. They consider the advantages of the model advanced Electronics and low weight (2 kg). Dissatisfied with users tough and a short power cord.

Advantages

  • high-quality assembly;
  • comfort and safety;
  • light weight;
  • anti-vibration handle.

disadvantages

  • no speed stabilization system;
  • hard wire.

Makita 9565CVL, 1400 W, 125 mm

Rating: 4.6

Makita 9565CVL, 1400 W, 125 mm

The easiest grinder in our review was the Japanese development Makita 9565CVL, it weighs only 1.8 kg. The model is suitable for performance of such types of work where low speed is required disk rotation. 1.4 kW electric motor has maximum speed of 6800 rpm. Experts liked the pleasant soft start of the tool, quiet operation, as well as the availability of the kit a disk with P60 grain and a round sole with Velcro for skins. Spindle lock speeds up the tool change process, system engine cooling effectively removes heat. With increasing load, the rotation speed of the disk does not change.

Russian masters identified several flaws in the model. it low engine speeds, short power cord, archaic fastening of a protective casing.

Advantages

  • ease;
  • soft start;
  • quiet work;
  • good equipment.

disadvantages

  • short cord;
  • low spindle speeds.

BOSCH GWS 17-125 CIE box, 1700 W, 125 mm

Rating: 4.5

BOSCH GWS 17-125 CIE box, 1700 W, 125 mm

High power has a network grinder BOSCH GWS 17-125 CIE. The electric motor spins the disc at a maximum speed of 11500 rpm The manufacturer has equipped the tool with a number of useful options. it soft start, speed stabilization system, overload protection, power button lock. Convenience at work adds two-position handle. Thanks to the fixing of the spindle, you can quickly replace snap. The maximum diameter of the disc is 125 mm with a landing size of 22.2 mm. The model closes the TOP-6 of our review.

Most reviews are positive. But there are reports that the Bulgarian repeatedly fails in warranty period. Perhaps the cause of the damage is the Russian assembly.

Advantages

  • high power
  • anti-vibration handle;
  • smooth start;
  • long wire.

disadvantages

  • big weight (2.4 kg);
  • breakdowns occur during the warranty period.

Metabo WEV 15-125 Quick box, 1550 W, 125 mm

Rating: 4.4

Metabo WEV 15-125 Quick box, 1550 W, 125 mm

Another Bulgarian from the German manufacturer Metabo got into our overview. But unlike the bronze medalist, the WEV 15-125 Quick model equipped with a less powerful motor (1.55 kW). Thanks to advanced Metabo Marathon engine technology has increased torque moment (5 Nm). It is able to rotate the spindle at a speed of 2800-11000 rpm The experts liked the stylish design, ergonomics, German quality. The asset model should be protected against overloads, speed stabilization system, soft start.

Users during operation identified several disadvantages. The gearbox is very hot in the grip area, especially when lateral loads. The speed controller is not very reliable, often the hexagonal pin breaks.

Advantages

  • stylish design;
  • ergonomics;
  • high torque;
  • rich equipment.

disadvantages

  • gearbox warms up;
  • short-lived speed controller.

DeWALT DWE4257, 1500 W, 125 mm

Rating: 4.3

DeWALT DWE4257, 1500 W, 125 mm

A popular grinder in our country is the DeWALT model DWE4257. Experts attribute this fact to the democratic price, which achieved thanks to the organization of assembly production in China. Low profile case like users gearbox, it allows you to work in hard to reach places. Long-term operation of the tool ensures smooth start-up, protection against unintentional start-up, electronic speed control. The power of the device (1.5 kW) is enough to solve most household tasks. The speed of rotation of the disk is adjustable within 2800-10000 rpm

Quality assembly and a long wire deserve praise. Consumers consider weak points of the machine an unreliable regulator revolutions, big weight (2.6 kg) and tangible vibration.

Advantages

  • affordable price;
  • compactness;
  • durability;
  • long soft cord.

disadvantages

  • short-lived speed controller;
  • unpleasant vibration.

AEG WS 13-125 XE, 1300 W, 125 mm

Rating: 4.2

AEG WS 13-125 XE, 1300 W, 125 mm

The undisputed leader in the number of reviews on NM is Bulgarian AEG WS 13-125 XE. And most of them are positive character. German engineering is going to China that makes it attractive in terms of cost. I liked the model experts in compact size and rich equipment. Small by power (1.3 kW) the electric motor spins the equipment at a speed 2800-11500 rpm. The tool has a long power cord (4 m), Fixtec patented nut for quick keyless tool change. The grinder comfortably lies in the hands thanks to the on / off handle with vibration protection. The speed control system adjusts tool for material and load.

Cons consider cars cons of fast heating when working at low speeds, noise in the gearbox, shaft play.

Advantages

  • compactness;
  • affordable price;
  • long cord;
  • rich equipment.

disadvantages

  • noise in the gearbox;
  • warms up at low speeds.

Makita 9565CVR, 1400 W, 125 mm

Rating: 4.1

Makita 9565CVR, 1400 W, 125 mm

Makita claims to be the most enduring grinder 9565CVR. Many users call the machine unkillable. The experts see several reasons for longevity. Firstly, the manufacturer reliably protected the motor from dust. Secondly, the design appeared new carbon brushes and an improved holder. Function soft start increases the life of the electric motor. Safety clutch prevents jerking of the grinder in case of jamming snap. 1.4 kW motor rotates the spindle with speed of 2800-12000 rpm.

The model closes the TOP-10 for several reasons. Consumers dissatisfied with the lack of vibration protection on the handle, there are complaints about quality of the protective cover. Reduce noise in the gearbox adding grease.

Advantages

  • durability;
  • unpretentiousness;
  • rich equipment;
  • high-quality assembly.

disadvantages

  • no anti-vibration pads;
  • no overload protection.

BOSCH PWS 1000-125 CE, 1010 W, 125 mm

Rating: 4.0

BOSCH PWS 1000-125 CE, 1010 W, 125 mm

At the most affordable price you can buy a BOSCH grinder in Russia PWS 1000-125 CE. It is a compact and lightweight model equipped with revolving electric motor (11500 rpm). Experts included machine in our review for low vibration, quick-detachable protective cover, effective engine cooling. To increase the term service manufacturer has introduced the Bosch Dust patented system Protection, protection against overloads and unintentional starting. Continuous performance is provided by the electronic system stabilization of revolutions.

The following flaws did not allow to rise above the grinder. The power cord is very hard, the spindle lock button is bad turns on, the body of the grinder is too big in girth.

Advantages

  • affordable price;
  • compactness and lightness;
  • rich equipment;
  • low vibration.

disadvantages

  • uncomfortable grip;
  • difficult to turn on the spindle lock.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment