11 best cement manufacturers

Ratings of the best repair products

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

No construction site today can do without such an important material as cement. Every year manufacturers improve manufacturing technologies, modernize equipment, which leads to the creation of high-quality formulations. The scope of application of the product is very wide, the material is used not only at construction sites, but also in other industries. Therefore, for each case, a cement with a certain set of characteristics is required. Before heading to a store or placing an order online, you should heed the advice of experts.

How to choose quality cement

  1. The composition of the cement. The basis of the cement composition is crushed inorganic substances, for example, limestone, clay, mineral additives and fillers. There are many types of material depending on the recipe. The most popular cement in our country is Portland cement. It is suitable for the construction and manufacture of reinforced concrete structures. But sea water destroys concrete based on Portland cement.
  2. Strength. The most important characteristic of any cement is strength. This indicator is incorporated in the marking of the material. Cement M400 can withstand a pressure of 32.5 MPa, this number is called a strength class. The five hundredth grade must correspond to the strength class 42.5. Military cement (M600) has the highest strength. It can withstand a load of 52.5 MPa. Most often, cement brands M400 and M500 are used in everyday life.
  3. Purity. Another designation worries potential buyers. On the packaging, the manufacturer indicates a number next to the letter D. It indicates the content of the additives. For example, cement mixture D20 contains up to 20% fillers, plasticizers and other compounds. The D0 marking indicates the purity of the cement, there are no additives in it.
  4. Curing speed. Depending on the type of work performed, the concrete solution should harden faster or slower. Therefore, manufacturers offer cement modifications with different solidification rates. If the package is marked CEM I, then the concrete will harden as quickly as possible. For M400 construction concrete, CEM V marking is considered normal.
  5. Packing. Manufacturers use multi-layer paper bags and sacks for packaging bulk and hygroscopic material. For a construction site, a large package (50 kg each) is optimal. And when small volumes of work are performed, it is more profitable to take packages weighing 5-30 kg.
  6. Shelf life. A distinctive feature of cement is its limited shelf life. The date of manufacture is indicated on the package, so when buying, you should calculate whether the composition will be used before the expiration date. Most often, the manufacturer guarantees the safety of the product from 3 to 6 months, while the time of transportation and storage in warehouses should be taken into account. Experts recommend checking the freshness of the composition yourself by hitting the corner of the bag with your hand. It is in these places that cement begins to turn to stone.

We have selected 11 of the best cement compositions for our review. The distribution of places in the rating was influenced by the opinion of the expert community and the reviews of Russian consumers.

Rating of the best cement manufacturers

Nomination a place Name of product price
The best cement brand M400 1 Cement Eurocement M400 D20 CEM II A-Sh 32.5 372 r
2 Holzim M400 263 r
3 Portland M400 Hercules RUB 690
4 Cement CEM II 32.5 (M400 D20) gray De Luxe RUB 298
The best cement brand M500 1 Eurocement 500 Super 382 r
2 Holcim ExtraCem М-500 50kg RUB 311
3 EuroCement 500 Extra D20 CEM II 42.5 N 379 r
4 Stone flower М500 Д20 255 RUB
The best cement brand M600 1 CimSa М600 820 RUB
2 Adana Super White M-600 RUB 980
3 Polymer cement white M600 Rusean 592 r

The best cement brand M400

Cement compositions of the M400 brand are intended for the preparation of medium-strength concrete. They are most often used for screeding, erecting internal partitions, leveling surfaces with large differences. The experts noted several proven manufacturers.

Cement Eurocement M400 D20 CEM II A-Sh 32.5

Rating: 4.9

Cement Eurocement M400 D20 CEM II A-Sh 32.5

The leading position in the Russian construction market is held by the domestic company “Eurocement Group”. The most popular brand of cement is Eurocement M400 D20. The holding's production facilities are located in different regions of the country. The composition with this designation is produced by such enterprises as “Mordovcement”, “Mikhailovcement”, “Pikalevsky cement”. The product meets all the requirements of international standards, therefore it is exported to a number of neighboring countries. The building mixture is used in the construction industry and industry. Cement is used to make floor slabs, reinforced concrete structures, foundations, walls, etc. The domestic product is distinguished by moisture resistance and frost resistance. The composition can be stored in closed bags for up to 6 months.

Advantages

  • acceptable price;
  • water and frost resistance;
  • high quality;
  • wide range of applications.

disadvantages

  • not detected.

Holzim M400

Rating: 4.8

Holzim M400

Cement Holtsim M400 is produced at the Shchurovsky plant in Kolomna. The company is part of the international concern LafargeHolcim, founded in Switzerland (1912). The products are distinguished by their whiteness, the level of which in the M400 brand reaches 70-74%. The cement obtained its unique properties due to the use of a special clinker with a low iron content. To increase the coefficient of light reflectance, additives such as diatomite and gypsum are added to the composition. The list of products also includes classic brands of Portland cement with a strength class of more than 32.5.

Cement Holzim M400 has earned high marks from experts and users for quality and strength. The product takes the second place only for the deficit in the trade network of provincial cities.

Advantages

  • high quality;
  • White color;
  • acceptable price;
  • versatility.

disadvantages

  • deficit in the trading network.

Portland M400 Hercules

Rating: 4.7

Portland M400 Hercules

Experts recommend buying Portland M400 Hercules cement for filling the floor screed. The product is highly durable after drying. Within a day, you can continue repairs, perform other finishing work. The assortment of the company includes different types of packages, it is especially convenient to transport 5 kg white and blue bags with slits for fingers. The composition meets Russian standards, its strength class is more than 32.5. Therefore, the screed will serve for a long time, and no cracks or chips will appear on it.

Users are satisfied with the quality of the cement, its strength and durability. The product is in 3rd place in the rating due to the large amount of counterfeit products in the construction market.

Advantages

  • environmental friendliness;
  • high strength;
  • universality of application;
  • not afraid of low temperatures.

disadvantages

  • high price;
  • low shelf life (2 months).

Cement CEM II 32.5 (M400 D20) gray De Luxe

Rating: 4.7

TM De Luxe

Cement CEM II 32.5 (M400 D20) of Favorit LLC is distinguished by stable quality and affordable price. It is sold in the retail chain under the TM “De Luxe” brand. Through the use of innovative technologies, the manufacturer managed to occupy its niche in the domestic market. Experts highly appreciate the resistance of concrete to temperature changes and resistance to moisture. The cement provides the mortar strength at the level of 32.5, it is worth noting the good adhesion of the composition.

Users like the rate of setting of the mortar, the quick set of hardness, the strength of the hardened concrete. Cement was not included in the top three of the rating because of one type of packaging (50 kg), as well as the need to work only at positive temperatures (above + 5 ° С).

Advantages

  • strength and durability of concrete;
  • good adhesion;
  • fast solidification;
  • affordable price.

disadvantages

  • packing in large bags;
  • installation work can be carried out at temperatures above + 5 ° C.

The best cement brand M500

Cement M500 has increased strength and durability. This composition is recommended not only for creating internal screeds, but also for pouring the foundation, erecting walls. Experts noted several high-quality products.

Eurocement 500 Super

Rating: 4.9

Eurocement 500 Super

A lot of positive feedback comes from domestic consumers to the address of Eurocement 500 Super cement. This brand is widely used in the construction of houses. The composition is suitable for making a foundation, for erecting brick and block walls, pouring screed, etc. Experts highly appreciate the fact that the production of cement is carried out in accordance with GOST. Material corresponds to class 42.5. The resulting concrete solution is characterized by high mobility and quick setting. Therefore, the timing of construction work can be reduced. It is also worth praising the composition for moisture and frost resistance.

Builders in the reviews are flattering about the concrete recipe, which is shown on the package. For quality and strength, the product wins first place in our rating.

Advantages

  • high-quality manufacturing;
  • strength and durability;
  • fast setting;
  • wide range of applications.

disadvantages

  • not detected.

Holcim ExtraCem М-500 50kg

Rating: 4.8

Holcim ExtraCem М-500 50kg

Holcim ExtraCem M-500 cement is distinguished by its fast hardening and endurance. Concrete prepared on its basis can withstand high loads. It does not crack or delaminate. Therefore, experts recommend using the composition when constructing the foundations of multi-storey buildings. The product class corresponds to the indicator 42.5. The manufacturer added special additives to the dry mix that prevent the structure from cracking after drying.

Cement takes second place in the ranking, as users note an uncomfortable bag without pronounced edges. Therefore, there are difficulties with carrying. But the builders have no complaints about the quality of the composition and strength of the resulting concrete.

Advantages

  • strength and endurance;
  • can be used inside and outside buildings;
  • plasticity of the working solution;
  • resistance to cracking.

disadvantages

  • inconvenient packaging.

EuroCement 500 Extra D20 CEM II 42.5 N

Rating: 4.7

EuroCement 500 Extra D20 CEM II 42.5 N

Another brand of cement from the holding “Eurocement group” was included in our rating. This is the composition of 500 Extra D20. It is produced at the enterprises of CJSC Maltsovsky Portlandcement and JSC Mikhailovcement. The product attracted the attention of experts with its speed of solidification and high strength. It is convenient to fill voids with the prepared solution, it is easily leveled, has a minimum setting time. Cement can withstand low temperatures, so builders advise using it during winter concreting.

Users are satisfied with the quality of the cement, its hardness and strength. Of the minuses, there is a slowdown in curing at low temperatures (below + 10 ° C). One of the drawbacks is the high price.

Advantages

  • great quality;
  • ease of use;
  • long shelf life;
  • no shrinkage cracks.

disadvantages

  • high price;
  • delayed curing at low temperatures.

Stone flower М500 Д20

Rating: 4.6

Stone flower М500 Д20

The best binding properties are possessed by the cement Stone Flower M500 D20. The quality of the products manufactured at the “Stone Flower” plant meets the modern requirements of domestic and foreign standards. The production uses only raw materials that are safe for humans and the environment. At each stage of manufacturing, strict control of compliance with technological discipline is organized. Therefore, experts recommend this manufacturer's cement for demanding jobs. The composition includes special compounds that increase the resistance of concrete to cracking and accelerate the drying process.

The product stops one step behind the leaders of the rating due to inconvenient large bags and a limited shelf life.

Advantages

  • ease of preparation;
  • environmental friendliness;
  • suitable for indoor and outdoor use;
  • moisture and frost resistance.

disadvantages

  • uncomfortable bags;
  • limited shelf life.

The best cement brand M600

To create reinforced concrete structures with maximum strength, M600 cement is required. With its help, sculptors make monuments, steles and concrete figures to decorate personal plots. The experts drew attention to several compositions.

CimSa М600

Rating: 4.9

CimSa М600

White cement of the Turkish company CimSa is very popular in the Russian market. The composition is intended primarily for finishing work. The company has long been working in the European market and in the countries of the former Soviet Union. Therefore, good contact has been established with dealers and end users. Experts consider the advantages of CimSa M600 cement to be an ideal surface in terms of smoothness and evenness, absence of cracks after drying, and resistance to negative weather phenomena. And in reinforced concrete structures, the white mixture protects the steel reinforcement from corrosion. Cement is obtained by “dry method”, which makes the final product competitive in the Russian market.

Cement becomes the winner of our rating for high strength, low water absorption and frost resistance.

Advantages

  • White color;
  • weather resistance;
  • resistance to cracking;
  • protection of steel parts against corrosion.

disadvantages

  • not detected.

Adana Super White M-600

Rating: 4.8

Adana Super White M-600

Another Turkish manufacturer of premium cement made it into our rating. Adana is a relatively young player in the construction market in Europe and Russia. However, the consistently high quality of products allows you to quickly reclaim your niche. By all the main criteria of Adana Super White M-600

fully complies with the requirements of international standards, and even far exceeds them. In addition to its aesthetic and decorative properties, cement is able to withstand very heavy loads. The whiteness indicator reaches 90%, the class corresponds to the indicator 52.5.

White cement is widely used in the construction of architectural and decorative concrete structures, the production of dry building mixtures and adhesives, the construction of monuments, sculptures, etc.

Advantages

  • high aesthetic properties;
  • wide scope;
  • strength and endurance;
  • weather resistance.

disadvantages

  • high price.

Polymer cement white M600 Rusean

Rating: 4.6

Polymer cement white M600 Rusean

The Russian “Rusean Production Company” has been working in the building materials market for over 20 years. The main task of the company is to produce quality goods at affordable prices. A striking example of a combination of price and quality is White Polymer cement M600. The product is characterized by workability, plasticity, good strength and easy handling. For these properties, experts gave the material the third line of the rating. The composition can be used for both indoor and outdoor use. It is resistant to negative external influences, while maintaining excellent aesthetic qualities.

Users praise the Russian composition for its low shrinkage, fine grinding, and frost resistance. Of the minuses, there is a high price and the need to use quartz sand.

Advantages

  • fine grinding;
  • resistance to weathering;
  • White color;
  • plastic.

disadvantages

  • high price;
  • it is necessary to add quartz sand.


Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment