10 best construction mixers

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

The construction mixer has completely replaced conventional drills in cases where it is required to prepare a plaster or cement-sand mortar. This device allows you to quickly and efficiently mix dry mixtures with water, mix glue or paint and varnish material. Today mixers have become more affordable, so you can find the tool not only in the hands of professionals, but also at home craftsmen. To choose the optimal model in terms of technical parameters, you should heed the advice of our experts.

How to choose a construction mixer

1. Power. Experts consider engine power to be one of the most important parameters of a construction mixer. This parameter must be selected taking into account the amount of work to be done.
2. Models with a power of 1200-1800 W are suitable for professionals; they do not overheat when mixing large volumes of solution.
3. For household purposes, a tool equipped with a 500-1000 W electric motor is enough.
4. Rotation speed (number of revolutions). Even with the same motor power, the mixers may differ in idle spindle speed. For mixing thick and viscous substances, models with a low speed (500-650 rpm) are suitable. And to obtain a homogeneous mass, it is better to use high-speed mixers (700-900 rpm). Professionals choose two-speed devices that allow you to set the rotation speed depending on the type of mortar.
5. Speed ​​control. Many builders begin the mixing process by gradually adding the dry formulation to the water and then mixing slowly. As the density increases, the number of revolutions must be added. Devices with electronic speed control are best suited for this task.
6. Torque. Very thick and viscous solutions put a heavy load on the mixer motor and gearbox. Therefore, you should take into account such a parameter as the force of rotation or torque. The higher it is, the more viscous compositions the tool can operate without overheating. Most often, 50-60 Nm is sufficient for the preparation of most mortars. For the thickest formulations, it is better to give preference to devices with a torque of 70-85 Nm.
7. Number of spindles. On sale there are mainly mixers with one spindle. They are simple and reliable, only when rotating, the tool is shifted towards the direction of rotation of the rim. For models with two spindles, the attachments rotate in the opposite direction. Therefore, these mixers are more convenient for intensive work.

We have selected the 10 best construction mixers for the review. All of them are sold in the Russian trade network. When distributing places in the ranking, the opinion of experts and reviews of domestic builders were taken into account.

Rating of the best construction mixers

Nomination	a place	Name of product	price
Rating of the best construction mixers	1	BOSCH GRW 18-2 E	RUB 29,090
	2	Metabo RWEV 1600-2	RUB 18,571
	3	DeWALT D21510	RUB 17 860
	4	Makita UT1401	RUB 14 612
	5	Hitachi UM16VST	RUB 9,999
	6	Interskol KM-60 / 1000E	RUB 5,745
	7	STANLEY SDR1400	RUB 6,870
	8	ELITECH MS 1600 / 2ED	RUB 6,050
	9	ZUBR ZMR-1200E-1	RUB 4,619
	10	Fiolent MD1-11E	RUB 3,690

BOSCH GRW 18-2 E

Rating: 4.9

Many professional builders fondly remember the old BOSCH GRW 11 E Professional mixer. On its basis, the German manufacturer has developed a new model BOSCH GRW 18-2 E. Instead of a one-handed design, the designers proposed a tool with two handles. The device provides for the use of one whisk, but due to its high power (1.8 kW), the device quickly and efficiently mixes dry mixtures with water in any proportion. The mixer has electronic speed control, which adds convenience in work. The experts gave the model the laurels of the winner of our rating.

Professional builders are pleased with the high torque, build quality and durability of the tool. The only disadvantages are the high price.

Advantages

• high power;
• electronic speed control;
• high-quality assembly;
• reliability and durability.

disadvantages

• high price.

Metabo RWEV 1600-2

Rating: 4.8

The combination of lightness (4.5 kg) and power (1.6 kW) allowed the construction mixer Metabo RWEV 1600-2 to take an honorable second place in our rating. The tool has two speeds, which allows the technician to adjust to the consistency of the mortar. The first speed provides rotation at a speed of up to 470 rpm, the second mode allows the mixer to spin up to 680 rpm. The manufacturer has provided for the possibility of using the device in the drill stand. The model is equipped with a long power cable (4 m), so in most cases the craftsmen can work without an extension cable.

Users praise the mixer for its ergonomic two-handed design, high performance, lightness. Of the shortcomings, builders note the inconvenience of attaching the rim.

Advantages

• high performance;
• light weight;
• long network cable;
• can be used for drilling.

disadvantages

• inconvenient attachment of the equipment.

DeWALT D21510

Rating: 4.7

Those builders who value mobility in the tool should pay attention to the DeWALT D21510 mixer. This light (3.0 kg) and compact model is inferior to the leaders of our rating in power (710 W). The manufacturer has provided only one spindle speed. By the way, its frequency is 550 rpm. The experts appreciated the high torque of the device (50 Nm). For ease of use, the model falls on the third line. The drill mixer is equipped with an M14 chuck, into which whisk with a diameter of up to 160 mm can be installed.

The owners of the DeWALT D21510 mixer are satisfied with the quality of mixing bulk and liquid building materials. The handle on the back is beyond praise. The disadvantages include low power and single-speed operation.

Advantages

• comfortable handles;
• metal gear and gears;
• light weight;
• cartridge М14.

disadvantages

• modest power;
• one rotation speed.

Makita UT1401

Rating: 4.7

The construction mixer Makita UT1401 has a good set of options. The device has an electronic speed control, power button lock, two-speed operation. A powerful electric motor (1.4 kW) can spin the tool spindle up to 730 rpm. Experts included this model for the excitement of interest in it from NM visitors. In just two months, about 3140 people viewed the product card. With a cable length of 3 m, the master will not experience the inconvenience of an extension cord. The weight of the device is 5.5 kg.

In the reviews, domestic builders praise the tool for its decent quality, ease of use and unpretentiousness. The disadvantages include the contradictory design of the handle (adjustable rectangular), which not everyone liked.

Advantages

• good power;
• two speeds of rotation;
• smooth start;
• long cable.

disadvantages

• inconvenient handle.

Hitachi UM16VST

Rating: 4.6

The Japanese mixer Hitachi UM16VST demonstrates the efficient mixing of different building mixtures. The device is suitable for both professional use and for construction and repair on your own. The tool is equipped with a powerful motor (1.5 kW), which spins the spindle up to 650 rpm. There are two speed modes. Comfortable switching is provided by the soft start option. Thanks to the M14 chuck, the maximum nozzle diameter reaches 160 mm. The experts appreciated the build quality of the device and included it in our rating.

Russian builders speak flatteringly about the reliability and unpretentiousness of the apparatus, the presence of a whisk and spare brushes in the kit. Of the minuses, the unwinding duration and the unfortunate location of the speed control button are noted.

Advantages

• high power;
• reliability;
• unpretentiousness;
• high-quality assembly.

disadvantages

• the speed control button is inconveniently located.

Interskol KM-60 / 1000E

Rating: 4.5

Domestic development Interskol KM-60 / 1000E attracted the attention of experts for a number of reasons. The manufacturer offers a fairly powerful device (1.05 kW) at a reasonable price. The engine spins the spindle up to 850 rpm, and the model has a two-speed mode of operation. The aluminum housing of the gearbox is responsible for the reliability and durability. It is possible to select the optimal mixing mode using electronic speed control. The tool stands out from the competition with its special shape and handle arrangement. For convenience, there is a trigger lock.

The mixer gets into our rating for positive feedback from users. They are pleased with the power, lightness (4.3 kg), efficient cooling. The disadvantages include a weak body, inconvenient fixation of the nozzle in the cartridge.

Advantages

• affordable price;
• reliability;
• electronic speed control;
• compactness.

disadvantages

• weak body;
• inconvenient fixation of the corolla.

STANLEY SDR1400

Rating: 4.4

The lightest construction mixer was developed by American designers. The STANLEY SDR1400 weighs only 3.5 kg, but it still offers enviable power (1.4 kW) and high torque (80 Nm). The tool spindle rotates at 800 rpm, the developer has provided a two-speed mode of operation. Of the options, experts noted the possibility of working in a drill stand, electronic speed control, and locking the power button. The model deservedly gets into our rating.

Builders on thematic forums praise the US-China mixer for its power, smooth start-up, high torque and lightness. The disadvantages of users include high noise levels and a short cable (2.5 m).

Advantages

• lightness and compactness;
• high torque;
• cartridge М14;
• the ability to use as a drill.

disadvantages

• noisiness;
• short power cord.

ELITECH MS 1600 / 2ED

Rating: 4.3

For the most difficult types of work related to mixing construction mixtures, the ELITECH MS 1600 / 2ED twin-spindle mixer is suitable. Thanks to the high engine power (1.6 kW), the tool can work for a long time at low speeds without overheating. For quick installation or removal of two nozzles, the manufacturer has equipped the device with quick-release fasteners. Electric brushes are also easy to change. The experts liked the two-speed metal gearbox (540 and 790 rpm). For mixing efficiency and durability, the device takes its rightful place in our rating.

Users are pleased with the affordable price of the mixer, its power, ease of use and reliability. The disadvantages include noise and the presence of an unpleasant odor in the first days of work.

Advantages

• mixing efficiency;
• acceptable price;
• reliability and durability;
• two spindles.

disadvantages

• noisiness;
• unpleasant odor at the beginning of work.

ZUBR ZMR-1200E-1

Rating: 4.2

The domestic development ZUBR ZMR-1200E-1 has many advantages. If users are attracted by an affordable price, then experts focus on performance. The maximum solution volume reaches 120 liters. The manufacturer installed a powerful electric motor (1.2 kW), a metal two-speed gearbox (620 and 810 rpm). Thanks to the efficient heat dissipation, the tool does not heat up during prolonged use. The mixer also has such useful options as an electronic speed controller, a button lock, a soft start. The model is in the TOP-10 of our rating.

Domestic builders often use the ZUBR mixer ZMR-1200E-1 at the facilities under construction. They praise it for its reliability, compactness and affordable price. Only a short cable (2 m) spoils the overall impression of the model.

Advantages

• affordable price;
• two-speed gearbox;
• smooth start;
• good performance.

disadvantages

• short cable.

Fiolent MD1-11E

Rating: 4.1

The Russian mixer Fiolent MD1-11E is equipped with a 1.1 kW electric motor, which provides a maximum torque of 85 Nm. The model can be used as a drill, but there is no drill chuck included. For the manufacture of the case, the manufacturer used plastic, and the gearbox is made of an aluminum alloy. The handle-bracket has an original shape, it becomes a support for the mixer when the operator needs to put it on the ground. An electronic speed controller is introduced in the start button. The trigger can be locked in any position. The maximum number of revolutions is limited to 600, there is only one speed mode.

The tenth place in the rating is explained by such disadvantages of the mixer as inconvenient speed control and self-tightening of the nozzle.

Advantages

• low price;
• multifunctionality;
• original handle;
• high torque.

disadvantages

• one speed;
• difficult to unscrew the nozzle.

---

Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.