How to Hang a Bathroom Mirror | 8 easy steps

If you think that a mirror in the bathroom is needed only to properly brush your teeth or shave, then you are deeply mistaken. In fact, it is a very important accessory that can highlight the sophistication of design, and a modern bathroom is often a work of art. Understanding the importance of this moment, the experts of the Expertology magazine will tell you how to hang a mirror in the bathroom correctly, and what points you should pay attention to, taking into account the features of various surfaces.

What to consider when installing a mirror

In addition to the fact that the mirror surface allows a person to see his image, with the help of a mirror, you can visually change the area of ​​the room, making the bathroom larger. Therefore, the first thing that you should consider when installing an accessory in the bathroom is its area and geometry, and the right place will help eliminate some of the imperfections of the room, albeit visually. Not just any place is suitable for this, so a few helpful tips before you learn how to hang a bathroom mirror might be helpful:

1. First of all, it is important to choose the right height for placing the structure, and it is necessary to take into account not only the growth of your family members, but also the guests. The best solution to the problem is a mirror, the upper edge of which rises 170 cm above the floor surface – the average person's height.

2. If you do not want to get the effect of a 'laugh room', keep the surface vertical, for which you will have to arm yourself with a building level.

3. Choose the height of the structure, taking into account your preferences and habits – if you want to see yourself in full growth, buy an accessory with a height of 140-150 cm.If you prefer to observe the reflection of the face and body part to the chest, a product with a height of 60 cm is enough, and to see only face – 40 cm.

4. Take into account the location of the heating devices, and installation at a small distance from the heated towel rail or radiator will damage the mirror surface.

5. It is important that the mirror is located at some distance from the sink if it is installed above it. The distance to the plumbing must be more than 20 cm.

There are other points, but simple, as it seems at first glance, mounting a mirror can turn into a real challenge. Each room has its own characteristics, and in some cases it is simply not possible to find a place for a large structure due to the small size of the room. You will also have to take into account the finishing material and the stage of repair at which you decided to hang the mirror – before finishing or after, which is much more difficult. Let's move on to considering the question: how to hang a mirror on a tile, and what are the features of mounting on other surfaces.

Features of installation on tiles

The most demanded material used for bathroom wall decoration is ceramic tile. It looks perfect, can be selected in accordance with the chosen design, besides, it is easy to stick and lasts a long time. There are several fastening technologies, we will focus on two of the most popular.

How to hang a mirror on a tile without fasteners

There are several types of bathroom mirrors. The mirror can be hung, as with the help of special fasteners, usually included in the delivery set, it can be drilled directly to the wall or glued, but first things first. Let's start with the classic version – using two mounts located at the top of the product.

1. We prepare tools, and each owner has a tape measure, a pencil for making marks on the wall, a building level for checking contours and verticals, a ruler, a drill and a screwdriver.

2. We make markings, and this is an important point, since the mirror should be located strictly in the middle above the sink, the top and bottom of the structure should be at the same level, it is not advisable to also allow distortions – this is ugly, at least.

3. Find the center of the sink, draw a vertical line with a pencil.

4. Having made simple measurements, we determine the height of the mountings. To do this, we find the upper point of the mirror, after which we measure the distance to the center of the fastener.

5. We draw a horizontal line and mark the locations of the holes for the fasteners.

6. We make one hole with a drill, install a plastic or wooden dowel under the screw, screw in the first fastener.

7. We hang the mirror, check the accuracy of the markings, and often, given the unevenness of the wall or the fastening strip, the location of the second hole moves.

8. We remove the mirror and, similarly to the first, make a second hole, screw in the second mount at the same level.

When drilling the tiles, if the installation of the reflective accessory is done after finishing the wall cladding, some precautions must be taken. If glossy tiles with a slippery surface were used for finishing, before drilling a hole, this place must be bored with a core or drill. In order not to damage the tiles, it is impossible to press on the drill during drilling, as there is a possibility of hitting the hollow brick, which can cause a blow to the tile.

It is important! When starting to drill the wall, find out if there are water and heating pipes under the tiles, if there is any wiring. Damaged communications can cause many problems.

Difficulties in drilling mirrored surfaces

Some designs of mirrors do not provide for the presence of a mount, but involves drilling the mirror itself. If you are faced with such a problem, do not be discouraged, as there should not be any special difficulties if you use our advice. First you need to choose the right drill, and for this you can use:

1. A product in the form of an arrow with a special coating. This shape allows you to smoothly scrape off the material, rather than punching it.

2. If there is no such drill, a round brass product is also suitable, but always with a diamond coating. In this case, it is important to drill slowly, periodically cooling the drill with water or turpentine.

3. The ideal solution when you need to drill a large hole is the diamond-coated tubular drill on the sides. It is also necessary to drill by periodically cooling the surface.

Perhaps you know some other methods and know how to simply hang a bathroom mirror by making a hole in it, we will be happy to use them. Each master has his own secrets, so there are many ways to drill holes in glass and mirrors. At the same time, do not forget to make the correct markings, because the mirror must not only be carefully drilled, but also hung straight.

Can a mirror be glued to a tile

To avoid the difficulties arising in the first two cases, the mirror can be glued by performing a predetermined surface preparation. It should not be dirty, as in this case there is a high probability that the mirror will not hold. For fastening directly to the wall, double-sided tape and special sealants are used, while the best result can be achieved with their simultaneous use.

First, tape tapes are glued in the center of the future mirror (two are enough), while the surface of the accessory is coated with adhesive sealant. The mirror is attached to the wall and leveled, and this must be done very quickly, until the sealant has seized, besides, the adhesive tape is fast.

Remember! When applying the sealant, be careful at the corners – it is not necessary to apply the glue mass here, but if this happens, and the glue protrudes outside the structure, the excess must be removed immediately using available means.

Subtleties of attachment to plastic and drywall

In addition to lining the bathroom with tiles, specialists often have to deal with finishing with plasterboard and plastic. The fastening process in this case is somewhat different. Let's start with drywall, and its surface at the attachment point must be pre-strengthened, that is, a solid foundation of thick plywood must be fixed on the inner surface. This is if the installation of the mirror was provided before attaching the drywall to the wall. Otherwise, the reinforcement is done on the outer surface.

As for PVC plates, we insist on the need to manufacture a metal or wooden crate, and it is necessary to provide for the possibility of installing a mirror surface in advance. The mirror is attached to this batten, and a wall mount is ideal, especially if there is little space between the slab and the supporting surface.

Several useful life hacks

In conclusion, I would like to give some useful tips, using which you can hang a mirror in the bathroom without any problems.

1. Tip 1. Around the place where the mirror is drilled, you need to make bumpers of plasticine or dough, and pour water inside to cool the surface. This will help prevent overheating.

2. Tip 2. The hole after the end of drilling to give roundness must be carefully processed using fine-grained sandpaper.

3. Tip 3. To prevent the bathroom mirror from fogging up during washing or taking water procedures, you can use one folk remedy. The surface treated with a mixture of a teaspoon of gelatin and 50 ml of water does not sweat. The solution creates a protective film on the surface that prevents fogging.

---