Review of the best according to the editorial board. About selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.
Infrared heaters are popular with users because they heat the person directly, not the air. Working without 'intermediaries' (oil, water, air) significantly increases the heating rate. Still, this type of heating devices does not start convection, and therefore, dust does not fly around the room, there is no extraneous noise from the fan. Most often, private houses and summer cottages have to be heated with such equipment, since additional cold comes from the ground. When traveling to a summer cottage for the weekend, it is long and unprofitable to start up a boiler with a water heating system (collect water, ignite the boiler, wait for the coolant to warm up). Therefore, our experts and analysts of the rankquality service have chosen the TOP-20 of the best infrared heaters that are suitable for such places of operation.
- How to choose an infrared heater
- Rating of the best infrared heaters
- The best infrared carbon heaters for summer cottages and homes
- Timberk TIR HP1 1800
- Veito CH1800XE
- ZENET ZET-503
- Polaris PKSH 0508H
- Velvet season NEBN-0.7 Kitten
- The best infrared quartz heaters for summer cottages and homes
- Ballu BIH-L-3.0
- NeoClima Shaft 2.5
- Hyundai H-HC4-18-UI728
- RESANTA ICO-2000
- Hyundai H-HC3-08-UI998
- The best infrared ceramic heaters for summer cottages and homes
- Ballu BIH-S2-0.6
- TEPLOCeramic TC-395
- Nikaten NT 200
- The best micathermic infrared heaters for summer cottages and homes
- Ballu BIH-CM-2.0
- Hyundai H-HC2-20-UI691
- Timberk TCH A1N 1500
- De'Longhi HMP1500
- The best halogen infrared heaters for summer cottages and homes
- Heliosa Hi Design 11BX5 / 11FMX5
- Frico IHF 10
- Almac IK7A
How to choose an infrared heater
Before the list of the best models, we will consider how to choose an infrared heater for a summer residence and at home, so that the equipment does a good job in such conditions. Here are the main parameters to watch out for:
- Dimensions. The size of an infrared heater can be from 30x30x6 cm to 200x30x12 cm, so before buying you need to think about whether it will fit in a room in a country house or in a private house.
- Power and area of operation. An infrared heater can consume from 0.4 to 3 kW of electricity per hour, which affects the heating rate and the ability to heat a certain area. The average figure for calculations is 0.1 kW per 1 m².
- Installation site. Heaters can be floor-standing, wall-mounted, ceiling-mounted or universal. This affects the convenience of setting – how easy it will be to reach the toggle switch. It also affects the space occupied (for example, when an infrared device is in the middle of a room, it can be knocked down by children or pets while playing).
- Heating element type. The heating element determines the speed of heat propagation, wavelength and outside temperature. The safest are ceramic and carbon film models, but the heat from them takes longer to reach the user. Among the productive heaters, quartz and halogen are in the lead, but you can get burned about them if you accidentally touch the heating element.
- Protection of the case from moisture and dust. If the device is sealed, then it can be used in the country, not only indoors, but also outside in bad weather. IR heaters with IP20 protection are suitable exclusively for dry weather or indoor use.
- Additional functions. Additional features in infrared fireplaces include: overheating protection, automatic shutdown in case of a fall, thermal control, remote control and the ability to rotate the body on an axis. This increases the comfort and safety of using the appliance in the home.
Rating of the best infrared heaters
|Nomination||a place||Name of product||price|
|The best infrared carbon heaters for summer cottage and home||1||Timberk TIR HP1 1800||4 320 RUB|
|2||Veito CH1800XE||RUB 15,700|
|3||ZENET ZET-503||RUB 3,690|
|4||Polaris PKSH 0508H||RUB 2,678|
|5||Velvet season NEBN-0.7 Kitten||RUB 1,190|
|The best infrared quartz heaters for summer cottages and homes||1||Ballu BIH-L-3.0||RUB 3,499|
|2||NeoClima Shaft 2.5||RUB 2,532|
|3||Hyundai H-HC4-18-UI728||RUB 2,244|
|4||RESANTA ICO-2000||RUB 3,230|
|5||Hyundai H-HC3-08-UI998||640 RUB|
|The best infrared ceramic heaters for summer cottages and homes||1||Ballu BIH-S2-0.6||RUB 2,665|
|2||TEPLOCeramic TC-395||RUB 4,590|
|3||Nikaten NT 200||RUB 2,520|
|The best micathermic infrared heaters for summer cottages and homes||1||Ballu BIH-CM-2.0||RUB 3,180|
|2||Hyundai H-HC2-20-UI691||RUB 3,380|
|3||Timberk TCH A1N 1500||RUB 3,008|
|4||De'Longhi HMP1500||RUB 9,990|
|BEST HALOGENIC INFRARED HEATERS FOR COTTAGE AND HOME||1||Heliosa Hi Design 11BX5 / 11FMX5||RUB 13,890|
|2||Frico IHF 10||RUB 20,845|
|3||Almac IK7A||4 400 rub.|
The best infrared carbon heaters for summer cottages and homes
Now let's move on to a list of the best heaters, selected by our experts based on product characteristics and customer reviews. Let's look at carbon heaters first. In them, a carbon film or carbon fiber acts as a heating element, from which there are two types of design (modular and in the form of rugs on the wall).
Timberk TIR HP1 1800
In the first place in the category of carbon heaters are goods from the Swedish brand Timberk. The device has dimensions of 67x25x13 cm and is intended for hanging on the wall. Supplied with brackets for secure attachment. If desired, the infrared device can be mounted on a telescopic stand, but you have to buy it separately. Power 1.8 kW allows you to use the heater to heat a room in the country with an area of up to 18 m². The front panel, where the carbon spiral tube is located, is protected by a thick grille. The maximum placement height without loss of efficiency is 2.2 m.
Our experts liked the infrared heater with the IP65 casing protection, which makes it possible to use it in the yard of a private house (gazebo, terrace or open lawn) even when it rains. In early autumn, short-term warm rain will not spoil the picnic, but with the help of the fireplace it will be possible to keep warm. Judging by the reviews, the moisture resistance of the heater has been tested by users many times and is not satisfactory.
- high speed of heating the house;
- safe wall mount;
- tilt angle adjustment;
- light weight 2.5 kg.
- high price;
- telescopic stand is purchased separately;
- no thermostat.
In second place is a carbon infrared heater from the Turkish brand Veito. The model is endowed with a power of 1700 W and is suitable for a spacious room with an area of 20 m² in the house. For the heater, you can adjust the heating power by switching modes at the bottom of the front panel. In the first position, the device operates at 850 W, and in the second – 1700 W. The device has dimensions 82x17x8 cm. The heater is mounted on a telescopic bar with height adjustment 82-135 cm and placed on the floor. The 40 cm base prevents it from toppling over easily if accidentally bumped. But if the heater falls, then an automatic shutdown will work. Users love the light weight of the 2.8 kg model and the presence of a handle on the back to carry the infrared device to different rooms in the country.
Experts considered this heater to be the best in terms of combination of power and space saving. Thanks to the vertical installation and the included stand, it can be placed in the middle of the room in the house without obstructing the passage, unlike horizontal fireplaces on a tripod.
- stable base;
- several color options;
- weighs 2.8 kg – easy to rearrange to the desired location;
- automatic shutdown when rollover.
- without thermostat;
- high price;
- less protection of the case against water (IP24) compared to the category leader.
A carbon heater with a heating element made of carbon fiber is produced with dimensions of 65x35x16 cm and has a power of 1200 watts. On the top panel there is a mechanical-type regulator, which is able to limit the power consumption to half, if it is not very cool in the country. In this mode, the infrared fireplace will operate at 600 W. Inside there are two heating elements arranged vertically. A handle is provided at the back to handle the fireplace when hot. The model is quite stable, but if you accidentally drop it, the heating elements turn off. In the reviews, the owners of the goods are satisfied with the reliability of such a security system. Users also share that they do not feel dry air.
The feature of the product is a swivel base that allows you to rotate the panel with infrared carbon emitters 180 degrees without moving the case. This is important if the house has expensive parquet or laminate flooring, which will help to avoid accidental scratches.
- light weight 4 kg;
- two power modes;
- compact dimensions;
- built-in protection against overheating and falling.
- produced in China;
- for some, the stand is not strictly vertical;
- easily soiled case.
Polaris PKSH 0508H
The fourth position among carbon infrared models belongs to the product from the American brand Polaris. The heater has a steel black body, inside which is a vacuum tube with a carbon thread. It is protected from the outside by a metal grate. The fireplace assumes a floor horizontal installation, in which the heat will be evenly distributed from bottom to top. But the manufacturer allows the use of an infrared device vertically. Due to its compact dimensions 60x21x21 cm, the device does not take up much space. The power of the infrared emitter is 800 W, but due to its advantageous location on the floor of the fireplace, it will be enough for a bedroom in the country with an area of up to 15 m². In the reviews, the product is liked by buyers for its beautiful design in a black case, which looks decent in a modern home.
The heater is distinguished by the presence of a timer for 180 minutes. This allows you to warm up the room, set the desired interval and fall asleep calmly without fear of overheating and fire.
- attractive design;
- light weight 2.1 kg;
- long service life of the carbon heating element;
- two modes of operation.
- no thermostat;
- settled dust is clearly visible on the black surface;
- you need to be careful not to step on.
Velvet season NEBN-0.7 Kitten
And here is a film-type infrared carbon heater, where the current flows through thin strips, sealed into the canvas. The product is produced in the form of a wall picture and has dimensions of 58×130 cm. It is supposed to be hung vertically on one self-tapping screw. When plugged into a socket, the heater consumes 500 W per hour. Power regulation or connection of a thermostat is not provided for. The manufacturer claims that the device will last for 50,000 hours of operation. Users in reviews like the light weight of the rug of 400 g and the thin structure, which allows you to roll it up and take it with you to the country.
Our experts have rated this infrared heater as the safest to place next to the bed. The surface temperature does not exceed 60-65 degrees, so touching with your hand will not cause burns. It is practical to hang a carbon fiber mat over a child's bed in the house so that the child can sleep comfortably.
- affordable cost;
- economical energy consumption;
- you can not get burned;
- weighs 400 g and can be taken with you on a trip.
- warmth is felt only in the immediate vicinity of 50-100 cm;
- no thermostat;
- short power cord 1 m.
The best infrared quartz heaters for summer cottages and homes
Infrared heaters in this category are more affordable. In them, the heating element is made of nichrome spiral or thread and is enclosed in a glass tube made of quartz sand.
In the first place in the category of quartz heaters are products from Ballu. The device has dimensions of 94x18x9 cm and weighs 4.1 kg. It can be hung on the ceiling, wall, or mounted on a bracket. The kit includes an innovative universal mount for all types of mounting. Feedback users like that the heater has a built-in thermostat that allows you to set a comfortable temperature. The device will turn on and off by itself as the indicators in the room change. The body of the device is made of metal, therefore it tolerates heat better (compared to plastic). Perforations are provided on the side and rear walls to remove excess heat. At the front, the heating element is protected by a steel grill, additionally plated with chrome to prevent corrosion.
Our experts have rated this infrared quartz heater as one of the most powerful in the category. With a heating element of 3000 W, such a fireplace is enough to heat a spacious room in a house with an area of 35 m².
- universal installation;
- built-in thermostat;
- thoughtful arrangement of perforations prevents overheating;
- innovative brackets included.
- it is inconvenient to reach for the switch located on the side behind the front panel;
- weight 4.1 kg needs to be securely fixed to the ceiling or wall;
- it is not recommended to hang it higher than 1.8 m from the floor.
NeoClima Shaft 2.5
The quartz heater with infrared radiation from the Greek brand NeoClima has a power of 2500 W and is suitable in a house for rooms up to 25 m². It can be wall-mounted, suspended from the ceiling or used on the floor. The case with dimensions of 88x26x12 cm is made of steel and reliably protects the quartz tube. Inside there is one heating element with a curved reflector for even distribution of infrared rays. The heater always runs at maximum power. In the reviews, buyers praise the product for an instant return to operating mode – heat comes from the first seconds after launch.
Experts liked the infrared heater with a quartz heating element because of the U-shaped brackets with a hinge in the middle. Due to this, the angle of inclination of the fireplace can be changed by 120 degrees. This is useful for a summer residence with a spacious living room in order to more accurately direct infrared rays to users.
- universal installation;
- sold together with cable and mains plug;
- durable metal body;
- instant access to operating temperature.
- only one heating mode;
- without thermostat;
- cannot be attached to a tripod;
- bright glow in a dark room.
The Korean manufacturer Hyundai offered a novelty in 2019 – an infrared quartz heater for a summer cottage or home with a power of 1800 W, which is suitable for an area of 18 m². The model has dimensions of 60x19x9 cm and is designed for wall mounting. On the side there is a rotary thermostat for setting a comfortable temperature in the house. Optionally, it can be mounted on a telescopic tripod, which is purchased separately. The infrared heater is allowed to be used outdoors only in dry weather, since the housing is not protected against water.
In the reviews, the product is praised for the clear operation of the overheating protection. If you leave the infrared heat emitter on at full power and forget about it, the device will turn itself off when it gets too hot. Such actuation occurs precisely due to a mechanical assembly that opens the circuit when a certain temperature threshold rises (the connecting plate bends from heat and physically breaks the contact). With this device you can not be afraid of a fire.
- temperature control with a switch on the side wall;
- power cord included;
- metal case;
- a mounting kit is provided.
- zero protection against moisture;
- the body is strongly elongated on the sides of the heating element.
The Latvian brand RESANTA produces a series of quartz heaters with infrared radiation IKO. The model selected by experts has a power of 2000 W and is suitable for a summer cottage with a room of 20 m². The device is mounted on the ceiling, so it does not take up space in the house, does not interfere with the passage and is less noticeable to others. The heater always operates at full capacity. To control the temperature remotely, you will need to purchase a thermostat separately. The device is compatible with various regulators from other brands. In the reviews, the owners like that the back wall of the heater is warm, not hot, and this allows you to hang it not only on concrete ceilings, but also on wooden ones, without fear of fire.
According to experts, the IR heater is the best in terms of body thinness. Unlike other models with a cross-section of 9-12 cm, this device has an indicator of only 4.3 cm. Due to the thin body, it is less noticeable on the ceiling and resembles a lamp shade from a fluorescent lamp.
- ceiling installation saves space in the house;
- inconspicuous design;
- does not dry the air;
- compatible with various thermostats.
- no moisture protection;
- sold without power cord;
- weighs 8 kg – difficult to hang yourself;
- relatively high cost.
And here is a compact representative of infrared quartz heaters from the Korean brand Hyundai. The device measures 36x25x7 cm and is designed to be installed on the floor or table. For this, it has its own stand. To prevent the fireplace from sliding over the surface, there are protrusions-stops below. Two quartz heating elements, located one above the other, are responsible for the radiation of heat. The toggle switch under them allows you to use two heating elements at once or only one of them. Accordingly, the power consumption is 400 or 800 W. Even at maximum mode, the power consumption is insignificant, which is liked by the owners of the fireplace in the reviews. But such a device is suitable only for a small room in a country house with an area of 10 m².
The experts considered the quartz heater to be the best at a price that is 6-10 times lower than that of other participants in the category. The infrared model also weighs 700 g, so it is not difficult to take it with you to the dacha, even in hand luggage. A comfortable handle is provided for rearrangement or long-term transfer of the device.
- uses energy efficiently;
- compact dimensions;
- weighs 700 g;
- two modes of operation.
- the case does not protect the heating element from moisture ingress;
- easy to kick down;
- you can scratch the parquet if you move it without lifting.
The best infrared ceramic heaters for summer cottages and homes
This category of equipment with infrared heating is distinguished by the increased safety of the heating element. Here, the heating element is embedded in a ceramic hob, which converts heat energy into infrared radiation. On the surface, the temperature for most does not exceed 70 degrees, so it is impossible to burn yourself with such a heater.
This heater is a square ceramic panel that generates infrared radiation. The stove has dimensions of 59x59x3.5 cm and is produced in white. The heating element installed inside consumes 600 W per hour. One device is enough for an area of 6 m². There is no thermostat here, but it can be connected via an additional wire and brought out to a convenient place. The device weighs 3.4 kg, so you can actually install it yourself. Since the heating element is poured into a ceramic plate, the front panel is not afraid of water and the heater can be placed in the bathroom in the country.
Experts marked the product as the best due to its special dimensions and ceiling installation, which is allowed at a height of 2.4 m. Please note that the infrared ceramic plate can be installed in the Armstrong suspended ceiling cell. Due to its white color, it looks like a standard drywall panel. This makes the heater inconspicuous in the home. For rooms with a larger area, several devices can be installed at once in the ceiling so that the heat is evenly distributed throughout the room.
- economical power consumption;
- you can install it yourself;
- inconspicuous location;
- work from a height of 2.4 m is allowed.
- the thermostat is purchased separately;
- one panel is suitable for a small area of 6 m².
The device is made in the form of a ceramic plate with dimensions of 59×59 cm, but weighs 12 kg, so it is not recommended to install it on the ceiling. The manufacturer offers a wall mounting option, where a 2 cm gap must be provided from a vertical surface for a block with a microcircuit. The heater has a power of 395 W. If it is used in a single copy, then it is suitable for a bathroom or toilet in the country. Users in the reviews like that for a day of continuous operation, the heater consumes less than 10 kW. Compared to it, a quartz apparatus with a power of 3000 W consumes this amount of electricity in 3 hours.
We found the ceramic infrared heater to be the best because of the wide range of colors available. In total, the model is available in 11 colors. There are both plain (gray, beige, wenge) and decorative (marbled, with imitation of wood species, with stains). This helps to choose the design of the device for the interior (furniture in the room, floor or wall tiles).
- the case is protected from moisture;
- very economical;
- built-in overheating protection;
- wide range of colors.
- weighs 12 kg;
- cannot be installed on the ceiling;
- only for a space of 4 m² – a larger area will require several models.
Nikaten NT 200
The heater from the domestic brand 'Nikaten' is produced with dimensions of 60x30x4 cm and is intended for wall mounting. The recommended heating area is 5 m². The infrared ceramic panel belongs to the energy saving class. There are two color options: beige and brown. The stove can be used in a toilet in the country, as well as in a shower or a small kitchen. The case is completely waterproof. In addition to infrared rays, the device triggers a small convection, so the heat is evenly distributed throughout the room, regardless of where the person is. There is no thermostat in the kit, so you will have to buy it to maintain the set temperature. The owners in the reviews like that after turning it off, heat continues to emanate from the ceramic plate for 30-40 minutes.
We considered the product the best due to the length of the warranty. The Russian manufacturer gives a term of 5 years. For competitors, this figure is 1-2 years. The model itself is designed to operate for 25 years.
- waterproof case;
- prolonged cooling;
- The efficiency is 90%;
- easy installation.
- the surface heats up to 85 degrees – if you touch it with your hand, it will be very hot;
- light convection is triggered, which causes more dust on the furniture.
The best micathermic infrared heaters for summer cottages and homes
Micathermic heaters also have radiation in the infrared range, which is achieved by conducting current through a heating element sealed in mica. Such a unit is distinguished by increased safety and the absence of bright light that interferes in the dark. Here are the best products with micathermic radiators for private homes and summer cottages, selected by experts.
The first in the category is the directional heater from Ballu. This is a micathermic heater with dimensions of 163x25x4 cm, with a power of 2000 W. It is suitable for a spacious bedroom in a house with an area of 20 m². The side walls are made of stainless steel. The manufacturer used a modernized case in it, which visually seems smaller than it actually is. To safely hang the heater on wooden ceilings, two layers of insulator are laid behind the heating element. According to reviews, it can be seen that the infrared ceiling panel does not smell of dust, even if it has not been turned on for a long time.
According to experts, the heater is the best, since the micathermic heating element has an increased service life (compared to competitors' products). This is achieved through the use of an aluminum alloy made with longitudinal corrugations. Outside, the element is additionally coated with anodizing with a thickness of 25 microns.
- does not take up useful space in the room;
- there is no air convection;
- there is no smell of burnt dust after switching on;
- double lined with heat-reflective materials.
- difficult to install yourself due to the weight of 8 kg;
- the mounting kit is purchased separately;
- maximum efficiency at a height of 1.8 m;
- without thermostat.
A South Korean heater Hyundai with a micathermic heating element has a power of 2000 W and is capable of heating a room with an area of 20 m² with infrared radiation in a house. The dimensions of the device are 162x25x4.5 cm and must be mounted on the ceiling. Wall mounting is not recommended for safety reasons. When placed on the ceiling, users cannot come into contact with the hot surface. The device weighs 5.5 kg. The model operates in one mode, but you can set the frequency of switching on and off by connecting a thermostat to it. The design of the heater is similar to a long lamp and does not attract too much attention. It does not glow in the dark, so the eyes are comfortable.
In the reviews, the owners note the quiet operation of the infrared heater – the case does not burst from thermal expansion. For such a high-quality assembly, the product made it to the list of the best. It can be installed in the house on the bedroom ceiling and relax in warmth and silence.
- increased fire safety;
- does not dry the air;
- convection is completely absent;
- long service life of the heating element.
- due to the long body length, some had to outweigh the lighting shades;
- high price.
Timberk TCH A1N 1500
Micathermic heater with infrared radiation is made with dimensions 126x28x6.4 cm. It consumes 1500 W per hour and is able to heat a room in the country up to 15 m². The structure is fixed to the ceiling. The shortened length, in comparison with the competitors' models, is compensated by the extended body by 3 cm and the wavy shape of the heater fins, so the heating efficiency from it is not worse, and even 15% better. Unlike other products in this category, there is a mode switch so that the device can operate at half or full power. The owners in the reviews note that it is comfortable in the room with him, since he heats the person and furniture (sofa, bed, chairs), but does not heat the air. It is easy for users to breathe.
This model is recognized by experts as the best installation height. It is designed for a level of 2.7 m. At the same time, it provides the most efficient operation without loss of heat for users. The product should be paid attention to the owners of houses built according to non-standard projects, where the ceiling is above the 'classic' level of 2.5 m.
- the cost is slightly lower than competitors;
- increased heating rate by 15%;
- does not heat the air;
- secure ceiling mount.
- 6.4 cm thicker body than other versions;
- no thermostat;
- weighs 8.7 kg – difficult to mount on the ceiling alone.
The category is completed by an infrared micathermic heater from the De'Longhi brand. The model has dimensions 82x59x13 cm and is intended for wall mounting or independent installation. For the second option, a bracket with wheels is included in the kit. To move the fireplace while hot, a covered handle is provided. The device consumes 1500 W and is capable of heating an area of 15 m². According to the reviews, buyers like the attractive design of the device, which will fit into the interior of any home.
This is a convenient infrared heating model for a spacious house or summer cottage, where users are constantly changing their location (sleeping in one room, watching TV in another, eating in a third, etc.). The fireplace can be transported and managed with one device, instead of buying several stationary ones. Another feature of the product is an electronic thermostat. Most competitors simply do not have it or it is mechanical. Here, the electronics control the temperature more precisely, so users don't experience excessive differences between heat and cold.
- castors for easy rearrangement in a hot position;
- presentable design;
- electronic thermostat;
- automatic shutdown in case of falling or overheating.
- high price;
- only 2 years warranty;
- going to China.
The best halogen infrared heaters for summer cottages and homes
This type of heating equipment is heated by a special lamp, where the filament is placed in a gas – halogen. This combination creates infrared radiation and light. Here are some popular options for a summer cottage or a private home that experts have paid attention to.
Heliosa Hi Design 11BX5 / 11FMX5
In the first place in the category of infrared halogen heaters is a model of the Italian brand with dimensions of 45x13x9 cm and a power of 1500 W. Despite its large dimensions, the lamp heater weighs only 1 kg. Inside there are two halogen heating elements capable of heating an area of up to 15 m². You can buy the product in black or white. Reviews show that the owners like the universal mount in the kit, which allows you to attach the fireplace to the wall in the country, hang it on a beam in a gazebo, or fix it on a vertical stand in the house. Since the heater has a degree of protection IP65, it is allowed to use it in the yard of the cottage even in bad weather.
Our experts considered the product to be the best in terms of packaging. It is already sold with a power cord and plug, but unlike other models, it has a switch on the wire. This allows heating to be started at the touch of a button located at a convenient level, instead of having to plug into a power outlet or reach for the housing. This is especially practical when placing the fireplace at a height.
- adjustable angle of inclination;
- can be attached to a vertical post or horizontal beam;
- available in black and white;
- protected from water.
- bulky body;
- high price.
Frico IHF 10
This halogen heater stands out for its design. The ribbed lattice, in contrast to the thin rods of the competitors' models, looks powerful and original. In appearance, the front panel, with its glow, resembles the heat emanating from a fireplace with wood. The unit is endowed with a power of 1000 W and operates in one mode. Dimensions 50x17x7 cm can be easily placed on the ceiling, without the need to rearrange the lighting shades. The lamp heater weighs 2 kg. It always works in one mode at full capacity and without a thermostat. The manufacturer used a new solution in the construction – convex glass. As a result, infrared transmission is increased by 10% compared to a flat screen.
This is another infrared model that leads in installation height. In the characteristics, a placement height of 2.3-3.5 m from the floor level is allowed. This product is worth paying attention to owners of summer cottages with spacious attics, where you can place a heater under the roof arch. Despite the remoteness of the device, everyone in the room will be warm.
- universal mounting bracket for fixing to the ceiling or wall;
- well-polished reflector for better distribution of infrared rays throughout the room;
- interesting design;
- reliable protection of the front panel.
- not available everywhere;
- short wire 90 cm.
Rounding out the category is a 2000 W halogen heater with an aluminum casing. Due to this implementation, the weight of the device is only 800 g. The manufacturer allows installation heights up to 2.2 m on the ceiling. Despite the compact dimensions of 39x15x8.5 cm, there are already three lamps inside the device. In the reviews, buyers share that at first they did not believe how such a 'baby' could heat 20 m². But in practice, the device works perfectly and the declared power easily copes with heating a given space.
We paid attention to the product due to the unique fastening. Unlike most competitors, here you can not only adjust the tilt angle of the heater, but move it to the side (the mount can move along the groove on the back wall). With a stationary ceiling mount, this is important if in the country you have to slightly rearrange the bed, sofa or table, not only along the line of the flow of IR rays, but also to the left or right of it. Then you do not need to remove the heater and install it in a new place.
- available in white and black;
- three halogen lamps;
- universal design;
- improved casing cooling;
- weighs only 800 g.
- high price;
- without thermostat;
- only one mode.
Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.