14 best computer chairs

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

Many hours of work at the computer puts forward increased requirements not only to the quality of the monitor, on which the safety of vision depends, but also to the chair. According to the recommendations of doctors in such work, it is necessary to take regular breaks for warm-up, and the position of the person in the chair should be 'correct'. But, let's be honest, not everyone cares about compliance with all the norms and recommendations of specialists, and therefore it would be reasonable to assign part of the obligations to preserve the health and working capacity of a person to the chair itself. The good news is that we do have such an opportunity. The market is replete with a variety of models of office chairs, adapted for the most comfortable and safe work at the computer.

The editors present you with a special rating review of computer chairs from among the optimal ones for a number of important factors and available for the average consumer.

How to choose a computer chair

To begin with, let's figure out the points to which you should pay close attention when choosing an office chair for comfortable and safe work at the computer.

Back and seat

These are the most important structural elements of the chair for the convenience and long-term working capacity. The shape of the back should have as many points of contact with your back as possible. In the lower part of the back, it is highly desirable, if not obligatory, the presence of a bend at the level of the intended position of the lower back. And it is important that this bend is not located above or below your lower back. Special protrusions on the sides of the backrest are also good. All these moments together are designed to effectively eliminate back fatigue and, in the long term, to maintain correct posture.

As for the seat, optimum depth is important. It is generally accepted that there should be a palm-wide space between the end of the seat and the bend of the knee. The bottom line is to prevent squeezing of the vessels at the bend of the knees and, as a result, swelling of the legs and all subsequent problems. Another point – it is desirable that the seat has a small depression in the center or closer to the back, which will make it easy to fix the position and not slide.

Additional ergonomics

This refers to auxiliary accessories and structural elements such as headrests, specially shaped sidewalls, armrests, etc. Individual parts or even all, depending on the model, can be adjustable. And by the way, it is desirable that all this is really regulated, if you buy a chair not strictly for yourself.

Here you need to look at the additional features of your work at the computer. So, for example, if the keyboard is on a roll-out shelf under the table top, and the chair is not equipped with armrests, then the hands will be 'hanging' in the air and be in constant tension. The problem will remain even if there are armrests, but they are not height adjustable. All this does not apply to a chair for a child, where armrests are contraindicated in almost 100% of cases for reasons of scoliosis prevention in a growing organism. But child seats are generally a separate topic, and the final group of the rating will be devoted to them with all the accompanying explanations.

As for the headrest, it can be painfully missed during prolonged, strenuous, intense work, when you need to tilt your head back and relax for at least a couple of minutes. Without a normal headrest and a low back of the chair, the head will not rest on anything, and with a high back without a proper headrest, the head on a relaxed neck will 'fall off' to the right or left. The head restraints can often be height-adjustable.

Another ergonomic accessory can be the lumbar support. This is a kind of 'pillow', which performs the functions of the same bend in the lower part of the back, which was discussed above. Most often this is a typical accessory for gaming chairs, where maximum customization is required.

Mechanisms

Now let's move on to another important aspect. It is extremely obvious that buying a shop chair that was originally made according to some average standards, and not according to the exact parameters of your body (which, by the way, can change over time, for example, weight) and at the same time hope that it will suit you perfectly – too naive. That is why computer chairs are equipped with adjustment mechanisms that allow everyone to adjust everything they need to fit their height, arm length, body shape, etc.

The most obvious adjustment mechanism is the seat height. This is absolutely necessary, since the height of people varies quite widely. The second is the position of the back. There are already options here – the angle of the backrest or its position in height. The first and / or the second can be adjusted or fixed depending on the specific model. More points – the rocking mechanism, the ability to unfold the chair 180 degrees and literally lie down for a nap. Finally, the very type of adjustment mechanisms may imply fixing the selected position with a screw-'twist' or a special lever. The latter is often preferable, but subject to high quality materials and workmanship.

Crosspiece

This detail of the office chair serves as the basis on which the chair stands by a playful analogy to a Christmas tree. Simple physics works here – the wider the diameter of the cross, the more stable the chair. The material of the crosspiece can be plastic or metal, rarely – wood. With regard to the material, one must proceed from the expected load (seated weight). As a rule, the maximum permissible loads are described in the technical data. The assumption suggests itself that a metal cross is better for a 'heavyweight', but there are a number of reservations: the part is solid / cast or welded, what kind of metal, its thickness, the presence of stiffeners, etc. At the same time, some types of polymers are parts of static loads may not be inferior to metal. Our rating will present different options.

Videos

As for the rollers, here we are no longer worried about our own convenience and health, but about the safety of the floor covering. Rollers made of ordinary polymer plastic 'hard grades', or even worse – metal, can literally destroy not only the lacquered surface of the parquet, but also quite hardy laminate, which can be easily and without consequences extinguished cigarette butts. To solve the problem, manufacturers equip chairs with rubberized or semi-soft rollers made of nylon. This circumstance must be clarified directly at the point of sale.

Upholstery

The material of the computer chair upholstery is in many ways a secondary issue, but only at first glance. First, let's find out about the materials themselves – it can be genuine leather, the so-called 'eco-leather', furniture fabric (or a wide variety of textiles), microfiber, aerosols.

It would seem that everything is clear with natural leather, and at first glance this is the best option. But in fact, such a coating most often has very modest 'breathable' properties, which means that without micropores or evenly applied tiny holes on natural skin, you will sweat corny. This is not to mention the fact that the leather cover is significantly more expensive.

It is not for nothing that we put the term 'eco-leather' in quotation marks, since under this phrase the manufacturers often shyly hide though high-quality, but still quite 'chemical' polyurethane, which has only external similarities with the skin. We emphasize that eco-leather is by no means a bad option, and such a coating is quite practical, pleasant to the touch, easy to clean and very widely used. We just want you to understand that this is not skin after all.

Furniture textiles are a solution for an amateur. Its advantage is that the surface breathes perfectly, and even a bare back on the textile back of the chair will not be cold and slippery. The downside is that a cup of coffee spilled on the seat is one hundred percent 'doom' to the chair's appearance.

Microfiber can be conventionally considered a special case of textile upholstery, with the difference that microfiber is unusually pleasant in terms of tactile contact, and in terms of contamination it has all the same disadvantages as furniture fabric.

Aeroset is an excellent material that perfectly removes fumes from the body and will not let you sweat unpleasantly even during the hottest game battles. If this material is used in the design of the chair, then only in certain areas where it is most appropriate.

Summary

We have listed and briefly described the main points of choosing a computer chair that are functionally important. Aesthetics, design, executive class, color scheme – these are all questions of individual preferences. Moving on to the top rankings of the best computer chairs recommended by our industry experts.

Rating of the best computer chairs

Nomination	a place	Name of product	price
The best computer chairs for gamers	1	AeroCool AC220	RUB 17,710
	2	ThunderX3 RC3	RUB 16 690
	3	TetChair iCar	RUB 12,990
Best office chairs	1	Kulik System Business	RUB 35,500
	2	C2W Channel Co	40 100 rub.
	3	Kulik System Elegance	RUB 25,500
	4	Metta Samurai S-3	RUB 14 808
	5	Chairman 668 LT	RUB 5 850
	6	Bureaucrat KB-8	RUB 4,070
Best Computer Chairs for Kids and Teens	1	Kulik System Trio	RUB 26,500
	2	MEALUX Nobel	17 584 rub.
	3	TCT NANOTEC KIDS CHAIR	11 400 rub.
	4	Bureaucrat CH-797	RUB 4,000
	5	TetChair CH 413 baby	RUB 3,290

The best computer chairs for gamers

First, let's take a look at three chair models that are well-suited for the avid video game player. In addition to quality and performance, when selecting the optimal models, our experts were guided by the issue of affordability. All three matched models include adjustable headrests, armrests and lumbar cushions. The backrest height and seat depth are not adjustable.

AeroCool AC220

Rating: 4.9

The AC220 model of the Taiwanese furniture brand AeroCool is a very interesting and functional specimen, which is good both for its expressive 'predatory' appearance and sufficient functionality that does not add weight to the final cost.

Load limit – 150 kg. The main shade is black, shades of design elements and individual artifacts can be chosen from blue, white, green (closer to light green), orange and red.

The computer chair has the following dimensions: seat – 54x55x14 cm, backrest is about 80 cm high, wheels diameter – 60 mm, position is adjustable in height from 40 to 48 cm in relation to the floor. Cross diameter – 350 mm. The total height of the chair is 123-131 cm. The net weight of this model is 21 kg, including packaging – 24 kg. Package dimensions – 86x70x33 cm.

The upholstery of the contact surfaces of the chair is made of polyurethane leatherette (the same eco-leather), the sides are PVC with a carbon-like texture, the back wall of the back is solid with a carbon fiber texture. In general, the design of the model has a 'racing' theme, and this is even mentioned by the manufacturer himself.

The frame in this model is metal, but the cross is nylon, however, its strength is enough to withstand the above-mentioned load of 150 kg. The armrests are made of a different polymer – durable and reliable. The interior of the chair contains a special filling made of polyurethane foam. Its density is: in the back – 45, in the seat – 50 kg / m³. The type of nylon rollers is semi-soft. Pneumatic drive – the highest class 4.

Features of the computer chair functionality include: changing the position of the armrests by turning around the axis and vertically; swing in the range of 3-18 degrees of inclination due to the “Butterfly” mechanism (you can change the swing stiffness with a special device); adjustment of the position of the headrest (including the angle of inclination, which is not so common); opening of the chair by 180 degrees, turning it into an impromptu couch.

Advantages

• expressive design;
• quality materials;
• opening up to 180 degrees;
• choice of colors.

disadvantages

• uncertain fixing of armrests' turns and backlash.

ThunderX3 RC3

Rating: 4.8

The second number in the group of the rating of the best gaming computer chairs is the RC3 model from the Taiwanese brand ThunderX3. The manufacturer itself is legally and in fact an affiliated structure with the parent company AeroCool Advanced Technologies.

This model, for the most part, does not lag behind the previous one, but it has a detail that makes it special. We are talking about an LED module in the form of a brand logo, mounted in the wall of the chair. The module has seven color modes that can be switched by lightly pressing the logo, and can also work in the mode of switching colors or 'breathing'. This is a removable part and can be removed if desired.

Now about more ordinary, but important things – materials. The chair is upholstered in eco-leather, according to the manufacturer's words – 'new generation'. What exactly is the advantage is not specified, but the quality is really decent. The pneumatic gas lift of the highest 4th class can withstand a player's weight up to 150 kg and is designed for height from 160 to 185 cm. The reinforced metal crosspiece is also designed for a significant weight.

The dimensions of the computer chair are as follows: seat width – 38 cm, depth – 50 cm; back height – 82 cm; seat height in relation to the floor – 44-51 cm; total chair height – 124-132 cm.

The functionality of this model is almost completely similar to the previous one: adjustment of the armrests in height and around the axis, the swing mechanism within the same limits with adjustable stiffness, the opening of the chair by 180 degrees. The only thing is that the headrest allows you to adjust only the position, but not the angle, and its very shape does not imply such an application.

Advantages

• metal crosspiece;
• opening up to 180 degrees;
• LED module;
• spectacular design.

disadvantages

• the only color option.

TetChair iCar

Rating: 4.8

The final position in this selection of the ranking of computer chairs is the iCar model from a major domestic furniture supplier from Southeast Asia, the TetChair company. This computer chair is somewhat inferior to the previous two in a number of parameters, but it significantly gains in price.

The upper load limit for this model is 120 kg. Total height 125-136 cm, seat height 44-55.5 cm depending on adjustment. Seat dimensions 51×55 cm, back height 80.5 cm.

The upholstery material is a fairly high-quality polyurethane. The structural elements are made of plastic, but strong enough to withstand the stated loads. Polyurethane foam is used for filling, but its density and other properties are not specified by the manufacturer. The material of the rollers is not explicitly specified, but there are suggestions that it is polyamide – a tough plastic, but quite tough, so a mat may be needed to protect the flooring.

The iCar's customization capabilities almost exactly repeat the functionality of the two models described above. The headrest easily moves vertically on straps, the armrests rotate around the axis and rise / fall, a synchronous swing mechanism with variable rigidity is implemented, the maximum angle of expansion of the chair is 180 degrees. The backrest positioning level and seat depth do not change.

There are only three color options for this model: the background color is black, the colors of the design elements are orange, blue or red.

Advantages

• affordable cost;
• opening into a 'couch';
• attractive exterior;
• sufficient functionality.

disadvantages

• dotted claims to the quality of materials and accuracy of assembly.

Best office chairs

The second group in the ranking of the best computer chairs according to the version is the chair models that are best suited for use in an office environment. The main condition that our experts set when choosing worthy options was endurance and reliability based on the increased intensity of workloads.

Kulik System Business

Rating: 4.9

Let's start traditionally with the most expensive, but at the same time, the most interesting option in all respects among all six monitored seats in this group. This is the Kulik System Business model.

First of all, let's make it clear enough for those who care about the manufacturer, country and, in general, the origin of the product. The network has more than fifty sites with national domains from different countries dedicated to the products of the Kulik System brand. Most of them were created by the Ukrainian web design bureau, so in some online stores you can find erroneous information that these are chairs of Ukrainian production. The Russian segment claims that Kulik System is an Italian company, and there is even a cautious hint in the design of the Italian flag. But in fact, all this is the purest fantasy of distributors, since in the official (not expanded) Italian alphabet even the letter 'k' is absent. In fact, the production of the Kulik System armchairs is the result of the development of the private practice of the famous Polish chiropractor Evgeniusz Kulik. And computer chairs of this brand are valuable precisely due to their orthopedic specialization.

The basic structural elements of the computer chair are designed for a maximum load of 130 kg. The product is made in an elegant and stylish design, in which at first glance you can guess the premium class. A choice of materials for upholstery is available – furniture textiles, high-quality leatherette, genuine leather. Shades for choice – black, white, brown, gray.

Product dimensions are as follows: net weight – 25 kg; seat – 50 x 45-50 cm; back in height – 68 cm; total seat height – 133-149 cm.

Here we see significantly wider customization options than the above solutions for gamers. So, here, in addition to adjusting the position of the armrests, it is allowed to change the position of the seat in depth and the backrest in height. The chair is equipped with an asynchronous (the angle between the seat and the backrest can be changed during the swing) swing mechanism of the Multiblock type with variable rigidity.

The material of the cross is a high-strength alloy with a mirror-glossy finish. Floor-safe semi-soft castors. Optionally, the chair can also be equipped with a headrest.

Advantages

• quality of materials and workmanship;
• premium class;
• exquisite design;
• wide customization possibilities;
• increased orthopedic properties.

disadvantages

• not found.

C2W Channel Co

Rating: 4.8

The next office model in our rating is a very original solution from C2W. This is a Russian company, the name of which stands for Chairs To Work. It is engaged in supplies from abroad, but also owns its own production lines in the Russian Federation.

This model belongs to the executive class and is focused on equipping the manager's workplace. Made in a classic design – massive shape, double diagonal stitching in the style of French design of the 60s of the last century, but also with the presence of elements that emphasize the modernity of the product. The cost of the chair is also 'premium', comparable to the previous model.

The computer chair is designed for a maximum load of 120 kg. The preferred upholstery material is eco-leather (polyurethane – 25%, cotton – 75%; density – 280 g / sq. Meter; air permeability – 3-54 ml / sq. Cm). Also, under an individual order, the upholstery can be genuine leather or other material. Basic upholstery colors – black, white, beige, brown.

The dimensions of the seat of the chair are 44 cm (width) by 50 cm (depth). The back is 64 cm high. Seat level – 44-57 cm from the floor. The total height of the chair, respectively, is 108-121 cm.

The possibilities for customization in this model are no longer as rich as in the previous one, but this is largely due not to the 'greed' of the manufacturer, but to the form and design features. Thus, adjustment is only possible in the height of the seat; The bulky seat cushion can be raised for easy dust cleaning. The cross has a built-in Multiblock synchro system with adjustable rigidity.

The crosspiece is made of a high-strength alloy, and its shape can be selected when agreeing on the details of the complete set of the chair. Wheels are made of metal with chrome-plated parts that are not in contact with the floor; the contact surface is polyurethane, which guarantees the preservation of the appearance of almost any floor covering.

Advantages

• expensive and solid appearance;
• many options for individual selection of upholstery, the shape of the cross and some other details;
• quality materials and assembly;
• completely floor-safe casters.

disadvantages

• few opportunities for customization.

Kulik System Elegance

Rating: 4.8

The third position in the group of the ranking of the best office chairs is the elegant model from the Kulik System, in which this very elegance is directly reflected in the name. The chair is in many ways very similar to the above-described Business model of the same Polish manufacturer, but it is half the price due to the optimization of the structural components and a less pronounced orthopedic focus.

The load-bearing capacity of the chair is the same as the previous model – 120 kg. The dimensions are as follows: seat width – 42 cm, depth – 43-48 cm; back height – 59 cm; total chair height – 117-133 cm. Product weight without packaging – 24 kg.

When ordering a computer chair, you can choose the upholstery material – eco-leather, furniture textiles, genuine leather. A wide range of colors is offered: red-white, pink, blue, red, black, white.

The functionality and customization options of this model include: height-adjustable armrests, seat depth adjustment, backrest height adjustment, Multiblock asynchronous swing mechanism (variable angle between the seat and backrest when swinging), backrest angle adjustment. The swing mechanism includes the ability to adjust the rigidity.

The crosspiece is made of durable alloy with a mirror polish on the outside. Rollers – semi-soft polymer. As an option, the computer chair can be equipped with a headrest.

Advantages

• quality materials and workmanship, neat seams;
• choice of colors and upholstery options;
• seat and backrest adjustment;
• retains its original appearance for a long time;
• exquisite design.

disadvantages

• separate claims to the service (the question is rather to the distributors).

Metta Samurai S-3

Rating: 4.7

The rating is continued by the original chair made by the Russian company Metta. Its originality lies in a fundamentally different approach to ergonomics than all of the above models. The most noticeable difference is the initial lack of padding in the back and seat. The surface in this case is a special high-strength mesh fabric reinforced with aramid fiber. Color palette: black, white, gray, beige, brown, blue, burgundy.

First, let's list the key physical parameters of the chair. The load limit for this model is set at 120 kg. Dimensions: seat – 52×54 cm, seat height from the floor – 49-59 cm, total height – 123-131 cm.

Customization and mechanical elements of ergonomics include: lumbar support, metal armrests with plastic pads (adjustable in three parameters – vertical, horizontal angle and distance between the armrests), headrest with tilt angle and height adjustment (you can choose a version without a headrest), swing mechanism synchronous type Multiblock with an offset center of gravity and adjustable stiffness. The seat and backrest are fixed and cannot be adjusted.

Special seat covers with varying degrees of softness can be ordered separately. The carpet covers are made in part from the innovative NewLeather material, which consists of perforated genuine leather and nylon thread reinforcement.

The crosspiece is made of ultra-strong alloy with a mirror chrome finish. All other exposed metal parts of the chair are made in the same way. Soft polymer rollers 60 mm in size have anti-rollback properties (with an 'empty' chair, they prevent accidental movement, and with a load they allow you to move the chair effortlessly), do not scratch the floor covering, are quiet and durable.

The manufacturer provides a 10-year warranty for the reinforced mesh fabric and the metal frame of the computer chair.

Advantages

• anti-rollback, soft and durable rollers;
• ten-year warranty for individual components;
• high-quality ergonomics;
• high-tech design.

disadvantages

• a noticeable percentage of complaints about the build quality.

Chairman 668 LT

Rating: 4.6

Now let's consider a variant of an armchair, which is interesting primarily for its expressive contrast between an impressive appearance and an extremely affordable price. This model is part of the wide range of Chairman upholstered furniture from the TypePet Trade and Industry Group.

The design of the computer chair is rather laconic, but emphatically representative, and can be suitable for equipping the workplace of a manager or first managers. The upholstery is good quality and tactile leatherette, you can choose from four color options – black, gray, brown, beige. The filler is ordinary foam rubber. The crosspiece is plastic.

The dimensions of a computer chair are as follows: seat – 53×46 cm; seat position level – 51-61 cm from the floor; backrest 56 cm high; the height of the entire chair is 107-117 cm; weight – 17.5 kg. Designed for loads of up to 120 kg, like all neighboring models.

The functionality of this chair is very minimalistic. From the adjustment possibilities – only the seat height. A synchronous swing mechanism is also built in, providing the ability to lock in one position and adjust the rigidity. Metal armrests with soft padding in the upholstery, not adjustable. There is a headrest with a fixed position.

Advantages

• affordable price;
• quite solid appearance;
• convenient and comfortable, according to user reviews.

disadvantages

• faulty materials, assembly and accuracy of fitting parts.

Bureaucrat KB-8

Rating: 4.5

And completes the selection of the best office chairs in the ranking from the KB-8 series model with the pretentious name 'Bureaucrat'. Actually, this is not even only a product line, but a whole trade mark under which the Russian company of the same name produces a wide range of office supplies and stationery. Most of the production is carried out in the countries of South-East Asia, but there are also own assembly lines in the Moscow region.

In shape and concept, this model is slightly similar to the above-described Samurai S-3 from Metta. But this similarity is only distant and consists in the fact that the back of the chair is a mesh fabric without any layers, upholstery and fillers. The seat is more voluminous, but also without polyurethane foam filler, like most of the above models.

The chair is designed for the same load as all the previous ones – 120 kg. Its dimensions are as follows: seat – 53×48 cm; seat position from the floor – 46-56 cm; the back is 74 cm high; the total height of the chair is 120-130 cm.

Ergonomic additions to the chair include a non-adjustable headrest and plastic armrests. There is also a built-in swing mechanism with adjustable stiffness, but rather limited – it allows only the backrest to swing.

Those parts of the chair where the upholstery is supposed (for example, the headrest) can be covered with eco-leather, furniture textiles or natural leather to choose from. The crosspiece is made of durable polymer.

The assortment includes 4 color options for this chair model: blue, red, gray and black.

Advantages

• affordable cost;
• comfortable and 'spacious' chair;
• nice design;
• breathable back.

disadvantages

• limited functionality.

Best Computer Chairs for Kids and Teens

The final selection in our ranking is computer chairs and armchairs specially designed for children and teenagers. Their design features often differ significantly from the 'adult' variants, and these differences are dictated by the recommendations of orthopedists and the requirements of the relevant standards. For example, in certain models of child seats, armrests may be completely absent. And this is by no means the manufacturer's economy, but direct adherence to the instructions of specialists – the growing body does not need involuntary crutches that can ruin posture.

Kulik System Trio

Rating: 4.9

The first number in the 'youth' seating group is the Trio model from Kulik System. Like two other models from the same manufacturer, the Trio has a pronounced orthopedic focus.

Structural elements, their shape and other physical parameters are designed to correct posture, minimize stress in the cervical spine, properly support the lumbar spine, a special notch in the seat eliminates the load on the tailbone, the longitudinal notch promotes normal air circulation.

The dimensions of the computer chair are as follows: seat – 42×37 cm, backrest 52 cm in height, chair height – 101-117 cm, weight without packaging – 23 kg. Designed for a maximum load weight of 80 kg.

The upholstery material can be environmentally friendly leatherette, genuine leather or furniture textiles. A wide range of colors is offered: beige-orange, blue-orange, red-green, blue, beige, pink.

The cross-piece of the chair is made of a durable alloy with a mirror polished exterior. As an option, an addition to the cross is available – a circular metal footrest. The casters are made from a semi-soft polymer and are safe for most popular flooring.

Possibilities for individual adjustment are as follows: height adjustment of the seat and separate seat back; change of backrest inclination; height adjustment of the armrests. The seat depth is not adjustable.

Advantages

• increased orthopedic properties;
• wide range of colors;
• attractive design;
• expensive appearance;
• sturdy construction;
• fairly broad functionality.

disadvantages

• there are complaints about the fragility of leatherette upholstery.

MEALUX Nobel

Rating: 4.8

The second example in this selection of the ranking of the best computer chairs is the Nobel model from the Taiwanese manufacturer MEALUX. There are assumptions that the origin of the brand is either Russian or Ukrainian, since the trademark is registered in both countries, and there is no Taiwanese representative office. However, the products themselves are revered for quality, safety and meticulous attention to detail.

This computer chair is even more targeted at a younger audience than the previous one, despite the fact that its 'carrying capacity' has been increased to 100 kg. Nominally suitable for children from 4 years old.

The model is not equipped with armrests, only textiles are used as upholstery, the colors are very different (red, pink, purple, blue, green, orange) with multi-colored abstract design.

The chair allows you to adjust not only the height of the seat from the floor (from 28 to 55 cm), but also its depth in the range of 32-38 cm. The height of the backrest can also be adjusted.

The metal crosspiece of a special asymmetrical shape guarantees stability, and the casters are equipped with special clips to limit the movement of the chair. These clips will become a real salvation for a very expensive chair, when the kid wants to ride it around the apartment with all his heart.

The manufacturer's warranty for the Nobel model is 60 months.

Advantages

• backrest position adjustment for seat height and depth;
• limiting the course of the rollers (stopper);
• sturdy metal frame;
• many colors with variegated patterns.

disadvantages

• not marked.

TCT NANOTEC KIDS CHAIR

Rating: 4.7

Another Taiwanese-made children's computer chair in our ranking is a model with a simple and clear name KIDS CHAIR from TCT NANOTEC.

The upholstery material for the back and seat in this case is furniture textiles in three solid shades: green, pink and blue. The textiles are water-repellent. The cross is made of reliable plastic, like the previous chair, there is a circular footrest, but not metal, but plastic. Its height from the floor is 25 cm. The stand can be removed if desired.

The maximum load is the same as the previous model – 100 kg. Chair dimensions: seat depth varies from 37 to 42 cm, height from the floor – 45-58 cm; the total height of the chair is 82-98 cm. The backrest can also be adjusted in height.

This model has a specific feature similar to the wheel travel limitation solution of the previous model. In this case, the chair moves freely without load, and with a load over 30 kg, the wheels are automatically fixed.

The manufacturer's warranty for this model is 1 year.

Advantages

• sturdy frame;
• upholstery textiles with water-repellent properties;
• backrest height and seat depth adjustment;
• automatic locks on casters.

disadvantages

• no pronounced disadvantages were found.

Bureaucrat CH-797

Rating: 4.6

The penultimate item in our rating is the CH-797 child seat model from the Russian company 'Bureaucrat'. This is a good design solution for a more than affordable price.

The main parts of the chair – seat and back – are made of different materials. Seat – soft with filling and textile upholstery. The colors are combined (background plus a picture), and there are a lot of them we will not list all the nomenclature options, you can always check the availability of available upholstery at the point of sale.

The computer chair is designed for a completely 'adult' load of 120 kg. The dimensions are as follows: seat – 47×40 cm; seat height from the floor – 46-59 cm; back height – 45 cm; the total height of the product is 91-104 cm.

Ergonomic features include plastic base, gas lift, swing mechanism, plastic armrests.

Customization options are rather limited: the position of the armrests, the depth of the seat, the height of the backrest cannot be adjusted; and the swing mechanism involves swinging only the backrest.

Advantages

• affordable price;
• good design;
• available components.

disadvantages

• assembly quality claims.

TetChair CH 413 baby

Rating: 4.5

And, finally, the cheapest computer chair for children in our ranking is the CH 413 model from the Russian furniture supplier from Southeast Asia – the TetChair company.

This is a simple and ordinary solution that is quite suitable for a mass consumer. There are many color options: basic background shades – beige, blue, red, orange, pink blue. In the visual design of the upholstery (furniture textiles are used), images of butterflies, geographical maps, anchors can be used.

The computer chair is designed for a load limit of 100 kg. Dimensions: seat – 44×45 cm, seat height from the floor – 44-55 cm; back height – 46 cm; total chair height – 89 – 101 cm.

The crosspiece is made of plastic, the seat and backrest are soft, filled, the armrests are plastic.

Adjustment and customization options: height adjustment of the chair (seat position), swing mechanism (only for the backrest) with stiffness adjustment. The position of the armrests, seat depth and backrest height are fixed.

Advantages

• the most attractive price in a selection of child seats;
• ease of use;
• surprisingly good quality materials and workmanship for such a cost;
• many colors.

disadvantages

• not marked.

---

Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.