The 11 Best Brake Pads for Hyundai Solaris

Review of the best according to the editorial board. On the selection criteria. This material is subjective and does not constitute advertising and does not serve as a purchase guide. Before buying, you need to consult with a specialist.

The popular Hyundai Solaris sedan has been officially sold in Russia since 2010 and has already managed to fall in love with many users. The model has economical 1.4 and 1.6 petrol engines, differing in power of 100 and 123 hp. The car also has a spacious trunk with a volume of 480 liters and many security systems, including: ABS, ESP, EBD, TCS, HAC. The updated model is interesting by the reduction of the braking distance by 2 m, compared to previous generations. This is made possible by a clever system with hydraulic calipers and double pistons. At the front, the manufacturer has implemented ventilated disc brakes, and at the back there is a closed drum device or an open disc, depending on the configuration. Here are the top 11 brake pads for Hyundai Solaris that have the most positive customer reviews and are liked by experts for their performance.

Manufacturer's Recommendations Hyundai Solaris Brake Pad Selection

First, let's consider the main recommendations of the Korean manufacturer Hyundai – Kia, which our experts were guided by when selecting applicants. The plant prescribes in the operating instructions to replace disc brake pads with a residual thickness of 3 mm, and drum – 0.5 mm. Ignoring the requirement leads to the fact that the lining can fly off from heating, and the brakes will disappear at the most crucial moment. The check is usually performed during vehicle maintenance every 15,000 km. When the original pads are worn out, you must immediately install new ones.

The brake pads for the Solaris model Hyundai must be selected based on the following criteria:

1. The size. For Hyundai Solaris disc brakes, front pads with a size of 132.8x58x2x17 mm are required. For rear disc brakes, the parameters are 99.8x41x2x15 mm. If a drum configuration is implemented at the back, then pads are needed for a circumference of 203.2 mm.
2. Stopping distance. It is worth asking the brake pad manufacturer what approximate braking distance the product demonstrates during tests. It can vary from 35 to 60 m. The shorter the value, the better.
3. The need for running in. After installing new brake pads, a 40 km run-in with regular braking is required so that the surface of the pads rub against the discs and touches the full area. For the highest quality products, the run-in is minimal (a couple of kilometers) and the brakes are already working with maximum efficiency. The length of the break-in also affects the force that must be applied to the brake pedal, which creates inconvenience for the driver and reduces driving safety.
4. Operating temperature. During friction, the pads in Hyundai Solaris heat up to 350 degrees. Therefore, the appropriate temperature must be indicated in the characteristics of the product.
5. Suitable for extreme braking. With a sharp press on the brake pedal Hyundai Solaris, the temperature of the friction linings can reach 600 degrees. If specified in the description, the pads are suitable for sporty driving and competition.
6. Wear resistance. Optimally, the brake pads on a sedan or hatchback Hyundai Solaris last 50 thousand km. But there are also stronger drum-type pads, capable of going up to 100,000 km. The manufacturer points out that the front pads wear out three times faster than the rear ones, since the braking of these wheels starts earlier than the rest.

Acoustic comfort. It is important that the pads do not creak during braking from heating. A constant squeak will annoy the driver.

The Korean manufacturer designed the brake system on the Hyundai Solaris so that the pads could fit from other car models, for example, from the KIA Rio. The company also issues permits for production to third-party firms and permits the use of non-original pads.

Rating of the best brake pads for Hyundai Solaris

Nomination	a place	Name of product	price
Best brake pads for Hyundai Solaris	1	Hyundai – Kia 581014LA00	RUB 2,527
	2	Bosch 0986494563	RUB 1,582
	3	Finwhale V1017	RUB 1,150
	4	Valeo 301021	RUB 1,480
	5	TRW GDB 3548, EU	RUB 1,516
	6	Hankook Frixa S1	RUB 3,193
	7	Fenox BP 43151	833 RUB
	8	ADR 250311	RUB 510
	9	AMD PAD ‑ 005	RUB 700
	10	Sangsin SP1239	RUB 920
	11	TDB 0640	1 204 rub.

Best brake pads for Hyundai Solaris

Now let's go directly to the TOP-11 best brake pads for Hyundai Solaris, which received the most positive reviews from customers or remembered by experts for their characteristics.

Hyundai – Kia 581014LA00

Rating: 5.0

In the first place are the original Korean pads installed on Hyundai Solaris from the factory. The kit includes 4 plates, two for each wheel. The product is designed for front disc brakes. The brake elements are made from a mixture of graphite and ceramics, which ensures their quiet operation and a light weight of 1.8 kg. The product is also notable for the absence of dust during operation – crumbs will not collect around the brake disc, which turns into black growths from water. The material is durable, resistant to overheating, but not harmful to the steel disc. The included staples provide uniform clamping of the lining and prevent extraneous noise.

Our experts point out the excellent wear resistance of the brake elements, which is confirmed by buyers in the reviews. The products fully comply with the requirements for Hyundai Solaris brakes, and the thickness of the pads is even 0.8 mm larger than the manufacturer prescribes, so they are enough for up to 50-60 thousand kilometers on the front axle, which is a good indicator.

Advantages

• there are slots for ventilation and accelerated cooling;
• produced directly in Korea;
• there are holes for springs pressing the anti-creak plates;
• minimum grinding time.

disadvantages

• high price;
• packaging is poorly protected from counterfeiting.

Bosch 0986494563

Rating: 4.9

In second place are the pads for Hyundai Solaris from the German manufacturer Bosch. Although the company has not received official approval from the Korean automaker for the production of brake elements for the Hyundai Solaris, the item with catalog number 0986494563 ideally matches the parameters for installation in this model. The set comes with 4 pads, but without anti-squeak plates. Products are manufactured at one of the factories in Portugal, Italy, Vietnam, China or Taiwan, so do not be afraid not to see Made in Germany on the packaging. In reviews, the product is liked by buyers of average wear resistance – if you drive carefully, then the front pads will last up to 25,000 km. The owners of Hyundai Solaris also note that during seasonal “changing shoes” when the wheels are removed, there is no black dust around the brake disc. Fans of an aggressive driving style will have enough brake elements for 15,000 km.

In our opinion, these pads are the best for Hyundai Solaris in terms of softness. When you press the brake pedal, the driver and passengers do not feel a sharp deceleration and do not jerk forward – the car stops smoothly, and no recoil is felt in the pedal.

Advantages

• do not “eat” the brake disc;
• average wear characteristics;
• soft braking;
• little dust.

disadvantages

• high price;
• sold without plates;
• not designed for “traffic light races”;
• may squeak a little.

Finwhale V1017

Rating: 4.8

The third place in our review is taken by Finwhale Hyundai Solaris pads. Model V1017 is suitable for front disc brakes in terms of parameters and can be easily installed in its original place. In reviews, the product is liked by its relatively affordable price. Hyundai Solaris owners report that with a non-aggressive driving style, the brake linings will last for 20,000 km. But the pads can squeak when braking at traffic lights and even emit an audible crunch. Black dust gradually accumulates around the brake disc. But the braking (deceleration Hyundai Solaris) is very effective and is not inferior to the sensations of the original pads.

The experts liked the product for Hyundai Solaris by the presence of a wear sensor. In this shoe model, it is supplied in one of the pairs and is attached to the brake disc. When erasing a small patch that has the same cross-section with the main rectangular block, a signal will be triggered on the dashboard. This is relevant if Hyundai Solaris is “shod” in all-season tires and the owner cannot check the condition of the pads every 6 months.

Advantages

• do not contain asbestos;
• uniform stable braking;
• more affordable cost;
• moderately soft.

disadvantages

• a little dusty;
• there is a creak;
• even a slight crunch is heard.

Valeo 301021

Rating: 4.7

Product with catalog number 301021 from French “Valeo” is also ideal for installation on front wheels Hyundai Solaris. The brake pads have a wear sensor, just like the above model. The thickness of the crimp strips is 17.5 mm, so after lapping there is an honest 17 mm required by the manufacturer Hyundai Solaris to replace the brake consumables. The characteristics of the goods directly indicate that they are suitable as an analogue instead of the original 581014LA00. The pads are made of low-metal composition containing up to 20% steel or copper. This solution made it possible to increase the strength of the structure and increase heat transfer – the linings cool down much faster than those of competitors, which buyers like in reviews.

It is for the lack of overheating that the product got into our review. We recommend taking a closer look at it to those Hyundai Solaris owners who often find themselves “hostages” of city traffic jams or operate a car in taxi mode.

Advantages

• there is a wear sensor;
• do not spoil the brake disc;
• quickly rub in;
• dust-free.

disadvantages

• noisy work;
• at -30 degrees frost, the braking distance increases.

TRW GDB 3548, EU

Rating: 4.6

Further in the review are brake pads from the TRW brand. The product is delivered in a branded red packaging and is protected from counterfeiting by barcodes and a mirror hologram. Model number 3548 is designed for Hyundai Solaris front disc brakes. If you need to install the same pads “in a circle”, then for the rear axle choose product with the number 3494. There are many real reviews for these pads with photos from the owners of Hyundai Solaris and Kia Rio on the well-known Drive2 resource. The product is called proven and reliable. Even with aggressive driving style, the friction plates will last for 30,000 km. If you drive carefully, they will last 40-50 thousand km.

We put them in the review of the best ones due to their excellent braking properties on wheels with R17 discs. If you decide to change the standard R16 to a larger size, you will inevitably face deterioration of the brakes by 20-30% (they will become “wadded” and very smooth). Instead of the original clamping blocks, the owners Hyundai Solaris advise you to install these, which immediately start to work better, before you get used to it.

Advantages

• there is a wear sensor;
• time-tested;
• do not need lapping;
• high protection against counterfeiting.

disadvantages

• there are no staples in the kit, so they rattle a little;
• brake discs may get hotter than usual.

Hankook Frixa S1

Rating: 4.5

These brake pads are produced by the South Korean company “Hankuk”. The company focuses on the production of consumables for all Korean cars, including Hyundai Solaris. The brand's products belong to the premium category, are widely known and are available for purchase in 20 countries around the world. Buyers in the reviews like that the company is not afraid to provide a 2-year warranty on its products. Users also like the silent braking with such plates, which does not exceed 70 dB. The company uses potassium hexatitanate as an adhesive, so there is no dust around the caliper. Moreover, all materials are environmentally friendly and do not harm the environment or the master's respiratory system during replacement.

We consider the pads to be the best for Hyundai Solaris in terms of strength and long service life. The friction material contains Kevlar fiber, which acts as a reinforcement under heavy loads. The braking system with this equipment will withstand emergency braking and work in the high temperatures inherent in the sport mode.

Advantages

• durability warranty 2 years;
• few fakes on the market;
• last twice as long as products of other brands;
• increased coefficient of friction 0.6 u.

disadvantages

• high price;
• so strong that they “eat up” the brake disc;
• there is a slight creak;
• when the wheels are cold, the braking performance is worse.

Fenox BP 43151

Rating: 4.4

In our review we could not do without a product from Fenox. For Hyundai Solaris, the manufacturer produces brake crimp plates with catalog number BP 43151. Although the packaging indicates that the brand is German, they are made in Belarus. Nevertheless, this is one of the fairly high quality factory consumables. In the reviews, buyers like the price of the brake pads, which is one of the cheapest. They are cast only from soft materials that do not contain metals, so they weigh less than competitors – 1.5 kg versus 1.8 kg. But the markings indicating the manufacturer and suitability for Hyundai Solaris are applied not only to the packaging, but even to the pads themselves, so it is difficult to fake the pads.

According to experts, these pads are the best for Hyundai Solaris in terms of value for money. This is not “nameless China” with an unknown resource and no reviews, but a fairly common budget brand. But the brakes serve up to 15-20 thousand km with a calm driving style. They also have soft braking that does not cause vibration in the body.

Advantages

• more affordable price;
• there are anti-creak plates;
• easy to install in place;
• the marking is spelled out on the linings themselves.

disadvantages

• paint gradually peels off them;
• no wear sensor.

ADR 250311

Rating: 4.3

The next brand on our list is ADR, which makes brake pads for hatchbacks and sedans Hyundai Solaris part number 250311. The blocks each have one slot for drainage and air passage. On the front side, on the linings themselves, the manufacturer's name and product number are applied. This avoids the sale of counterfeits in the original packaging. ADR has production facilities in Russia, which helps to reduce the total cost of products. But imported materials and raw materials are involved in the manufacture, so consumables for Hyundai Solaris are quite high quality. For example, friction linings are attached using German glue that can withstand increased loads.

Experts have recognized the pads as the best due to one of the most affordable prices. Four friction blocks for the front brakes can be purchased for 500 rubles. Although they do not have anti-squeak plates, they work sanely. We recommend a product for servicing the brake system when these costs were not at all included in the plans for the near future.

Advantages

• reliable protection against counterfeiting;
• high-quality electroplating;
• German materials are used;
• can be bought in any city in Russia.

disadvantages

• with an aggressive driving style, the friction clutches can break off at the corners;
• sometimes a terrible squeak appears, which is present until the car stops completely;
• until the material warms up, the brakes are sluggish.

AMD PAD ‑ 005

Rating: 4.2

The AMD brand for Hyundai Solaris has PAD-005 front pads. They were included in the list of subjects by the Za Rulem publishing house and showed a number of positive characteristics. For example, in the course of the test, the average wear value was 0.38 mm, while the Valeo had this indicator at 0.36 mm. With a colossal difference in price, the differences in abrasion were insignificant. On deceleration tests (imitation of a series of overtaking on the track), the clutches show average performance – they will withstand several heats up to 600 degrees, but it is better not to expose them to regular overheating.

We found these pads to be the most suitable for Hyundai Solaris in terms of the force required to apply emergency braking. As tests show, in an unforeseen situation (a child ran out onto the road) the driver manages to press the pedal, but not hard enough, which increases the braking distance. With these pads, a force of only 24 kgf is required (versus 26-47 kgf for competitors in this price category) for the wheels to lock completely (when tested with the ABS disabled at 70 km / h). In this case, the braking distance is 40-47 m.

Advantages

• affordable price;
• easily installed instead of the original ones;
• do not overheat;
• short braking distance.

disadvantages

• very dusty;
• no grease for the calipers included;
• suitable only for quiet driving.

Sangsin SP1239

Rating: 4.1

Sangsin is another supplier of Korean pads that are sent from the factory directly to the concern's conveyors Hyundai – Kia. On the secondary market, products are sold under the Hi-Q brand in traditional blue packaging with yellow letters. Each element must have a marking. Products are manufactured directly in Korea. When creating, environmentally friendly materials are used and there is no asbestos in the clutches. During the period of friction against the brake disc, no grooves are formed on the metal, and there is no accumulation of black graphite dust around. At the moment of braking, the pad is gently pressed against the surface of the disc, so that there is no discomfort in the car interior. The braking distance in them is 38-45 m at a speed of 70 km / h.

The masters in the reviews report that the pads are easily installed in the regular places of the Hyundai Solaris caliper. Service maintenance of the brake system with them occurs without problems, and replacement of linings “in a circle” is carried out in 1 hour and 20 minutes. If you want to change the brake blocks to Hyundai Solaris yourself, you better buy this brand.

Advantages

• up to 40 thousand km serve in front;
• back up to 80 thousand km are nursed;
• almost no dust;
• do not contain asbestos.

disadvantages

• sometimes creak;
• there are fakes made in China.

TDB 0640

Rating: 4.0

The review is completed by a product from the Russian manufacturer TDB. The company is licensed by the Korean carmaker Hyundai and operates under their periodic supervision. For Hyundai Solaris it offers pads with catalog number 0640. They are precisely tailored to the vehicle manufacturer's specifications and fit easily to the sides of the brake disc. Despite one of the most affordable prices in the category, the model has a wear sensor. Tests show that under emergency braking, the section of the friction material is reduced by 0.38 mm. Due to its copper-free composition, the pads do not squeak even when heated. But buyers in the reviews share that the linings will have to be rubbed for a long time, so the brakes will work worse at first.

We found these pads to be the best for Hyundai Solaris in terms of softness to the brake disc. Service practice shows that they absolutely do not “eat” metal. There will be no grooves or grooves on the disc, and the next time the brakes are serviced, it will not have to be ground.

Advantages

• affordable price;
• moderate abrasion resistance;
• withstand several emergency braking;
• easy to find on sale.

disadvantages

• rub for a long time;
• begin to collapse when the temperature reaches 500 degrees and above;
• you need to press on the pedal with a force of 40-50 kgf until the surface of the pads takes the form of discs.

---

Attention! This rating is subjective and does not constitute an advertisement and does not serve as a purchase guide. Before buying, you need to consult with a specialist.