14 best car speakers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Acoustics in a car plays a big role: agree that where more pleasant to go to a pleasant musical composition, drowning out the fuss around and creating a pleasant atmosphere inside the cabin.

The editors of the magazine tried to understand all the nuances and subtleties of products in this segment, and made a rating of 14 most the best car speakers in three thematic categories. As The criteria for selecting products to the final list were used:

  1. cost and performance parameters;
  2. specifications;
  3. user reviews and expert opinions.

Rating of the best car audio

Nomination a place Name of product price
Best coaxial car speakers 1 Alpine X-S65 25 490 rub.
2 Hertz MPK 165.3 PRO 19 900 rub.
3 Focal Performance PC 165 10 000 rub.
4 Pioneer TS-Z65F 11 000 rub.
5 JBL GTO 620 5 210 rub.
6 Morel Tempo Coax 6 3 890 rub.
Best Component Car Audio 1 Focal PS 165 FX 12 840 rub.
2 Eton MAS 160 27 890 rub.
3 Pioneer TS-Z65CH 14 500 rub.
4 Audison Voce AV K6 25 900 rub.
5 Hertz MPK 165P.3 PRO 21 400 rub.
6 Audison Prima APK 163 19 500 rub.
The best case car audio 1 Boss MRWT69RGB 12 900 rub.
2 Cadence ATS 2.69BT 15 700 rub.

Best coaxial car speakers

A feature of a coaxial speaker system is following: one case contains several speakers at once, which significantly saves space when installed in the seat. In addition, reproduced sound frequencies are divided by areas for which a special crossover is used. True, There are significant drawbacks to this design: due to using the same channel with a large and small speaker possible sound distortion caused by interference sound waves.

Alpine X-S65

Rating: 4.9

Alpine X-S65

The superiority of the Alpine X-S65 over its competitors is due to several important nuances. Firstly, in the manufacture of speakers materials of a higher class were applied here. For example, Woofer made of nanofiber, excluding any audible distortion of the sound, and the suspension is made of HAMR material. In his In turn, the RF diffuser is made of graphite … well, but inside all the same neodymium magnet.

Now to the characteristics. For normal operation Alpine X-S65 it needs 110 watts of power at which it reproduces frequencies in range 55 – 50,000 Hz. Standard impedance at 4 ohms and 89 dB sensitivity make this representative a great option to complete the car, with only one caveat for the high cost.

Advantages

  • carbon and nanofiber diffusers;
  • pure sound over the entire frequency range;
  • high-quality performance and great design.

disadvantages

  • high price.

Hertz MPK 165.3 PRO

Rating: 4.8

Hertz MPK 165.3 PRO

A step away from the leader stopped coaxial speakers from Hertz, having a breakdown into 2 bands and an external component crossover on 3.5 kHz. According to the speaker development standard, the woofer got pulp cotton fiber diffuser for added sound volume and scattering, and the HF was limited to a diffuser of tetolon and a small neodymium magnet. All this splendor works at 110 W of power and frequency from 40 to 22500 Hz, which covers almost the entire range of audible frequencies and switches to vibration.

Hertz MPK 165.3 PRO crossover slope is 6 and 12 dB / oct The build sensitivity does not exceed 92 dB, and the impedance, according to standard, 4 ohms. If you are thinking about whether to purchase given acoustics, then recall our recommendation: take required.

Advantages

  • powerful and productive crossover included;
  • nice design of all acoustic elements;
  • very deep, pleasant bass and clear treble.

disadvantages

  • not identified.

Focal Performance PC 165

Rating: 4.7

FOCAL PERFORMANCE PC 165

Enchanting set of car audio from Focal, which has become the unspoken leader in terms of price quality. By paying only 10 thousand rubles, you get 165 mm productive and “economical” speaker, assembled in a cast aluminum basket with a polyglass diffuser and butyl rubber suspension. Its resonant frequency is 68 Hz, despite the fact that the frequency reproduction range ranges from 60 to 22000 Hz.

It should be noted that Focal Performance PC 165 is one of the most energy-efficient acoustic kits in the selection: for its Power supply needs only 60 watts of load. Concerning sensitivity, it is much higher than that of the analog from Pioneer, and is 93 dB. But the impedance coincides completely, like the ability to connect to amplifiers from various manufacturers. Just because of quality, just because of Focal.

Advantages

  • low price;
  • Great sound across the entire frequency range;
  • Great design and quality build materials.

disadvantages

  • not found.

Pioneer TS-Z65F

Rating: 4.6

Pioneer TS-Z65F

Fairly expensive coaxial car audio kit, including a woofer with a diameter of 165 millimeters, and a 2.2 kHz crossover. Low enough sensitivity compared to other options (85 dB), however declares a huge range of reproduced frequencies: from 32 to 96000 Hz Bass notes are distinct, clear and voluminous, but for disclosure of all potential for sound, you need to correctly install the speaker in a box.

In rated mode, the Pioneer TS-Z65F runs at 110 W, withstanding a short triple increase in this indicator. It has a standard impedance value (4 ohms) and in generally not picky about amplifiers. All in all a great buy for your car.

Advantages

  • full-time crossover included;
  • excellent sound quality over the entire frequency range;
  • striking design to match the entire Pioneer product line.

disadvantages

  • not found.

JBL GTO 620

Rating: 4.5

JBL GTO 620

For the operation of this car audio is only 75 watts of load. However, it is able to perceive short-term 225 W, proving that JBL does very workable things. Model has a standard two-way output for woofers and tweeters and can reproduce frequencies from 45 to 25000 Hz. Bass pretty deep, though not covering the entire possible range. At twisting the volume to the maximum does not block the acoustics, however, until tangible wheezing and disruption of sound in this mode of operation will be near.

A big enough problem for the JBL GTO 620 is the selection amplifier. The model has 2.5 ohms impedance, and it works correctly far from every representative of additive devices. Generally, no more features can be distinguished, except, perhaps that, the lack of a crossover, as well as atypical and attractive appearance.

Advantages

  • extraordinary design;
  • excellent sound reproduction quality;
  • moderately deep bass;
  • low power consumption.

disadvantages

  • acoustics is difficult to select an amplifier – we recommend completing devices from the same manufacturer.

Morel Tempo Coax 6

Rating: 4.4

Morel Tempo Coax 6

Coaxial two-way speaker system for a budget assembly capable of handling any reproduction task music. It has 110 watts of power, withstanding 200-watt peaks in maximum load. Has 90 dB sensitivity and 4 ohms impedance, so you can not bother with the selection amplifier. Loses frequencies from 40 to 22000 Hz, pulls well bass, but sometimes breaks down on high.

The Morel Tempo Coax 6 comes with a crossover at 4000 Hz, cutting from 12 dB per octave in each band. Woofers and Tweeters have cellulose diffusers that give sound scattering and appropriate surround sound. Users also note nice appearance of the acoustic kit, which is for budget options, in general, are very rare.

Advantages

  • low price;
  • nice design;
  • the presence of a crossover;
  • moderately deep bass (during normal installation in a box).

disadvantages

  • Dirty reproduces high frequencies.

Best Component Car Audio

A more profitable option for car acoustics is component system. Although she suggests more number of components (divided by playback frequencies speakers), its sound quality is almost always higher than that of coaxial models. This is achieved by dividing the channel into multiple bands and the actual impossibility of superimposing sound waves one on another, as the speakers are independent of each other. Component car audio is slightly more expensive and more difficult to install, however, all this is leveled by high quality sound.

Focal PS 165 FX

Rating: 4.9

FOCAL PS 165 FX

Focal PS 165 FX – a kind of compromise between price and quality offered in the component car audio category. The appearance of these speakers can not be called unattractive: the reason for this is the composite FLAX diffuser of the woofer, located in a rubber seal on an aluminum basket. IN the tweeter in turn consists of aluminum-magnesium diffuser, which practically does not play a role in appearance speaker system.

By standard, the Focal PS 165 FX is equipped with an external crossover dividing the frequency range from 55 to 28000 Hz into two flow and shear 12 and 18 dB / oct with LF and HF. Rated power acoustics is 80 watts, with the ability to perceive short jumps up to 160 watts. Impedance standard 4 Ohm, and the sensitivity is not called too high (94 dB). Together with an average market price, this model becomes the leader of our rating.

Advantages

  • the presence of a powerful crossover;
  • low power consumption from the onboard network;
  • original appearance;
  • high-quality low-frequency diffuser.

disadvantages

  • not found.

Eton MAS 160

Rating: 4.8

ETON MAS 160

There is not much information on this car audio, however most users are inclined to purchase it. we tried to determine what caused such a stir, and it turned out that most refers to low power. 70 watts nominal – it’s not enough even by the standards of compact models.

Eton MAS 160 has two-way separation of the reproduced sound, and comes with a small crossover for 2 kHz The sensitivity is 89 dB, and the impedance is 4 ohms. The only nuance that confuses you when choosing is the high price, which is due to the quality work with sound. The rest is there are no features – it’s just solid and expensive car audio kit.

Advantages

  • low load on the onboard network;
  • high sound quality;
  • high-quality finish speakers;
  • the presence of a crossover.

disadvantages

  • high price.

Pioneer TS-Z65CH

Rating: 4.7

Pioneer TS-Z65CH

The third line of the rating at the disposal of Pioneer TS-Z65CH – not at all not an accident. This model has fantastic performance. reproducible frequencies (30 – 96000 Hz), but it costs much fewer competitors. Acoustic sensitivity is 85 dB, and rated operating power is 110 watts. There is an external crossover at 2 kHz, which improves the quality of reproduced sound. 4 ohm acoustic impedance makes it easy to complete amplifiers of various levels, but we still recommend giving preference for Pioneer designs to maximize compatibility.

A lot of features lies in the design of Pioneer speakers TS-Z65CH. So, the low-frequency diameter of 170 millimeters has a two-layer cellulose diffuser reinforced with aramid fibers. But in the tweeter as a diffuser is used aluminum, and the role of a magnet is played by a neodymium rod.

Advantages

  • low purchase price;
  • traditionally beautiful appearance;
  • the ability to perceive a peak power of 330 watts;
  • the presence of a crossover.

disadvantages

  • not found.

Audison Voce AV K6

Rating: 4.6

AUDISON VOCE AV K6

Despite the fact that the Audison Voce AV K6 is a almost complete analog of Hertz MPK 165P.3 PRO, there are a couple of small nuances that allow you to place it above the competitor. The tweeter is also made using neodymium magnet and tetolone diffuser however the difference lies in a swivel design. The same situation is with The woofer, but its diffuser, among other things, is impregnated special Light Damping solution for strength and reduce interference.

Audison Voce AV K6 has a crossover with a frequency of 2.5 kHz, cutting 12 decibels per octave in two bands. Purely technical difference with previous competitor is great, but when listening it is not too noticeable. The rated power in this model is 125 W s the possibility of a short-term increase to 250. Are all significant are these nuances? If you look at the acoustics in terms of price, then at Other things being equal, you can buy a kit from Hertz. If you like to profit even the smallest superiority, then Audison will be exactly what you need.

Advantages

  • good design performance;
  • the presence of an external crossover with a slope of 12 dB / oct;
  • LF diffuser impregnation with Light special compound Dumping.

disadvantages

  • high price.

Hertz MPK 165P.3 PRO

Rating: 4.5

Hertz MPK 165P.3 PRO

Very good acoustics with 2 complete speakers, working at a power of 115 watts. Despite the lack of a dedicated band under midrange playback, it sounds better than Audison Prima APK 163, and there are several good reasons for this. Firstly in Tweeter at 29 millimeters is a neodymium magnet, and the diffuser is made of durable tetolon material. In its turn the large woofer is equipped with a ferrite magnet and cellulose-cotton diffuser, as well as a durable rubber suspension and lightweight aluminum basket.

The Hertz MPK 165P.3 PRO also includes an external crossover with 4 kHz frequency. Little distortion, more quality! The steepness of its cut for LF and HF it is 6 and 12 decibels per octave, respectively. It is also worth noting the presence of ferrofluid cooling, impedance at 3 ohms and 230 watts maximum signal power.

Advantages

  • the presence of cooling;
  • external crossover that improves the quality of outgoing sound;
  • nice appearance of the acoustic kit.

disadvantages

  • high price.

Audison Prima APK 163

Rating: 4.4

AUDISON PRIMA APK 163

Three-band low-power component acoustics sound reproduction, presented in the size of 6 inches (16 centimeters). Loses frequencies from 50 to 20,000 Hz with separation on different speakers, which significantly improves the sound quality. The model has an impedance of 4 ohms, therefore, choose the appropriate her amplifier is not difficult.

By optimizing the power settings of Audison Prima APK 163 produces moderately loud sound at a rated power of 125 W, and can take 375 watts without sacrificing integrity, but only at for a short time. Dimensions of the complete tweeter make up 26; MF – 100; and the largest, low-frequency, by to which the standard size is set – 165 millimeters. Only the disadvantage of this acoustics is the high cost, however quality is maintained at a consistently high level.

Advantages

  • 3 bands of sound reproduction;
  • powerful woofer;
  • impedance 4 ohms;
  • high degree of reliability.

disadvantages

  • somewhat ascetic look.

The best case car audio

The name of this category speaks for itself. Acoustic the kit here is already installed in the case, so you do not need make a case and think about the internal layout elements of the system. The disadvantage of such kits may be poor-quality assembly, due to which the sound may occur extraneous noise: from rattling and vibration to the echo effect.

Boss MRWT69RGB

Rating: 4.9

Boss MRWT69RGB

An audio system with a moisture-proof housing that can installed not only in cars, but also on special pleasure boats. It has small overall dimensions (15×23 cm), oval shape and RGB backlight. frequency range playback varies from 65 to 20,000 Hz, which means that the bass notes are a little lacking in the system.

The power rating of the Boss MRWT69RGB is 300 W with the possibility of increasing to a peak of 600 watts. For given overall size is a very good indicator of the ability to operate the system at high volume. With this speaker Doesn’t lock, which adds competitive advantage models. Acoustic sensitivity is 89 dB, and 2 bands playback noticeably affects the purity and sound quality.

Advantages

  • moderately powerful compact speaker system;
  • 2-way playback
  • low price;
  • the presence of RGB-backlight.

disadvantages

  • not found.

Cadence ATS 2.69BT

Rating: 4.8

CADENCE ATS 2.69BT

Water-resistant active speakers with a power of 600 W, designed for installation on off-road vehicles and vehicles. They have an original cylindrical shape resembling an ordinary door handle with dimensions of 15×22.5 centimeters. Hence, the acoustic kit does not take up much space in the trunk, however You should not expect a rich, loud sound from her. Frequency sound reproduction range varies between 35 – 25000 Hz, and the sensitivity is 92 dB.

In order to install Cadence ATS 2.69BT in a car, you you may need a podium for acoustics, wires for connecting radio, as well as additional noise insulation places to prevent interference from outgoing sound.

Advantages

  • wide range of reproduced frequencies;
  • compactness;
  • sufficient power for its size.

disadvantages

  • inconvenient form for installation in the trunk of a car.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply