The 9 best gas burners

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Gas burners are a universal fuel equipment due to its wide scope and ease of use. Spray nozzles or independent tourist cooking device – burners are always at hand, do not require an electrical connection much more convenient than making a fire or melting parts over gas stove. Devices have become more advanced than predecessor models, their design improved, decreased failures and maintainability of the burners, for which they again became popular among tourists and craftsmen.

The team of experts of the Internet portal made up its own portable gas burner rating in two categories: travel devices and for soldering with piezo ignition.

Rating of the best gas burners

Nomination a place Name of product price
Top travel gas burners 1 Kovea Alpine Pot Wide KB-0703W 8 300 rub.
2 Fire-Maple Family FMS-108 5 490 rub.
3 Tracker “Talking Fire” 1 580 rub.
4 Kovea Backpackers Stove TKB-9209 1 669 rub.
The best piezoelectric soldering torch 1 Virax MAPP PRO 10 488 rub.
2 KEMPER 1064 E 5 533 rub.
3 ROFIRE Piezo 1950 ° C 3 546 rub.
4 FOXWELD MT-55 336 rub
5 STAYER 55584 MASTER 4 10 rub.

Top travel gas burners

Traveling with tents or camping, rafting cooking food is a special ritual that is being prepared for at the stage preparation for rest, in particular, think over a method of heating water and products. Bonfire is not always convenient, and it’s allowed to breed fire is far from everywhere. Portable gas is deprived of these shortcomings tourist burner.

Kovea Alpine Pot Wide KB-0703W

Rating: 4.9

Kovea Alpine Pot Wide KB-0703W

Opens rating gas torch for South Korean tourists assembly Kovea KB-0703W Alpine Pot Wide, created as alternatives to the famous Jetboil PCS system, which includes itself flame output device and liter pan. The main feature of Kovea – the presence of a heat exchanger at the base of the pan, transmitting heat maximum flame energy, thanks to it a liter of water reaches a boil in no more than 3 minutes, saving gas up to two times compared to conventional similar devices. Low power in the presence of a heat exchange unit favors the effective operation of the device in cold and rains, in addition, gas is not wasted due to being inside construction, and even a strong wind does not threaten him.

Tourist burner control unit, switching the flame power and shutting off gas conveniently to carry out even with boiling water. Also effective insulation of the heat circuit with a neoprene cover allows you to keep device during its operation, and for the convenience of fluid transfusion on the case of the pan is a handle, for which, by the way, Kovea Alpine Pot Wide can be hung on any vertical surface, including in the tent and car – burner device with the attached cylinder is firmly fixed at the base of the pan. Some tourists use this device for cooking. and drinks even without stopping at a halt or in a fishing boat.

It is convenient to store the device: as unnecessary gas components burners are placed in a saucepan. Kovea Alpine Pot Wide System compatible with KFG-230, KGF-450, KGF-110 cylinders, and also with collet cylinders with the Cobra adapter hose.

The cost of a gas burner starts at 9,800 rubles.

Advantages

  • Universal device for use in a tent, outdoors air or in the car;

  • Folds comfortably;

  • Low gas consumption 75 g / h;

  • Does not make hands when boiling when using a cover;

  • Possibility of use all year round in any weather;

  • Rich equipment (pan with lid, burner, mug, cover, burner, heat exchanger cap);

disadvantages

  • High price but competitive compared to prototype Jetboil PCS;

  • The pan is suitable mainly for boiling water and heating liquid products, boil or fry anything in it will work out.

Fire-Maple Family FMS-108

Rating: 4.8

Fire-Maple Family FMS-108

The second place is occupied by a classic gas burner for tourism. The largest stainless steel fire-maple family in the group a burner supporting a uniformly wide flame – and a kettle it is convenient to boil, and put the pan. The size of the dishes may be any – the device displays the holders in the work plane diameters up to 285 mm, and the supports are very stable to support weight filled pan.

The gas burner Fire-Maple Family is equipped with piezo ignition and convenient flame controller, and helps protect the flow from the wind screen around the perimeter. So that the gas does not leak during inaccurate connection and disconnecting the can, the design provides a protective nipple. As a gas source, any threaded cartridges and cylinders with adapter FMS-701.

Convenient to transport and store Fire-Maple Family – its pillars fold down and the device takes on a flat shape, comfortable placed in a tourist backpack.

The flame intensity allows you to boil a liter of liquid quickly – a little more than three minutes, while gas consumption compared to the leader-leader of the rating is slightly higher – about 220 gr. for one hour (to varying degrees depending on the type of cartridge).

You can buy Fire-Maple Family FMS-108 from 5 500 rubles.

Advantages

  • Suitable for dishes with a bottom diameter of up to 30 cm;

  • Gas leakage protection.

  • It is convenient to use in strong winds;

  • There is piezo ignition;

  • Sustainability;

disadvantages

  • Relatively high gas consumption;

  • The location of the spray can is lower; cartridge without hose.

Tracker “Talking Fire”

Rating: 4.7

Pathfinder

Third place went to the gunner Talking Fire, equipped with piezo ignition. It can be used with any dishes with a diameter of up to 250 mm, but must be observed caution when balancing – the burner has only 3 beams. For convenient installation of the device on smooth and how many surfaces on legs are provided with a rubber coating. Store your device conveniently in a special complete case.

Compared to the burners previously reviewed, the Pathfinder does not have wind protection to use in windy weather without reducing flame efficiency, the device will have to be made from improvised funds or purchase separately.

For the operation of a tourist burner you will need a cylinder with a threaded valve PF-FG-230 (230 g) and PF-FG-450 (450 g) or with PF-FG-220 collet chuck (220 g) with PF-GSA-01 adapters or PF-GSA-03, which also have to be purchased separately. Consumption optimal gas – about 140 g / h.

The cost of a gas burner Tracker “Talking Fire” – about 2 000 rubles.

Advantages

  • Compact model;

  • Low price;

  • Suitable for dishes up to 250 mm in diameter;

  • Low gas consumption;

  • There is piezo ignition;

disadvantages

  • Piezo ignition often junk (it is better to have matches with you);

  • There is no wind protection.

Kovea Backpackers Stove TKB-9209

Rating: 4.6

Kovea Backpackers Stove TKB-9209

Closes the rating in the category of tourist burners the simple Kovea Backpackers Stove TKB-9209 device, equipped with a flame regulator. The device is a a nozzle on a cylinder or cartridge with gas, forming a powerful windproof flame, but piezoelectric ignition is absent and will have to use a lighter or matches. As footless folding on its side, the burner is flat and comfortable transported, stored in a bag attached by the manufacturer. Can be used with any standard threaded bottle. type or Cobra adapter.

Gas consumption by a tourist torch of the South Korean assembly Kovea Backpackers Stove TKB-9209 is approximately 145-150 g / h, and the cost of the device itself is about 1,600 rubles.

Advantages

  • Compact device;

  • Low price;

  • Powerful flame resistant to wind;

disadvantages

  • Unregulated burner;

  • Unstable design.

The best piezoelectric soldering torch

For soldering small-sized parts, mini-welding in the form of gas burner, the main working component of which is directional jet of heat flame. Almost all devices equipped with piezo ignition. Similar devices are used in electromechanics, electronics, in jewelry and medical business – wherever work with thin parts and boards is needed.

Virax MAPP PRO

Rating: 4.9

Virax MAPP PRO

The first Virax MAPP PRO soldering torch – device French assembly with a melting point of 24,000 ° C. The burner is a small oblong can with bent metal tip, at the base of which piezo ignition set. Light weight and comfortable shape allow work with soldering in any position, canopy or on the surface, in any environmental conditions. The spray can is 788 ml, this is enough for 2.5 hours of continuous operation. True weight 1.18 kg devices – hard for fingers with no habit.

Virax MAPP PRO gas burner can be brazed solder up to 18 mm in diameter, soft – up to 54 mm. The cost of the device is over 10,000 rubles.

Advantages

  • Ability to work in any temperature and weather conditions;

  • Optimum possible diameters of soldering;

  • High flame temperature;

  • Long work from one spray can;

  • Relatively large volume for a hand torch;

  • There is a cylinder in the kit;

disadvantages

  • High price.

KEMPER 1064 E

Rating: 4.8

KEMPER 1064 E

The KEMPER 1064 E soldering torch of universal application is gas spray nozzle for brazing copper, bronze and brass pipes of different diameters. Convenient handle with a piezo lock button and flame control allows you to use the device as usual the handle, working in any plane directed by a stream of temperature 24000С with a flow rate of only 205 g / hour, which is less than that of leader of the rating category (315 gr. / hour).

The KEMPER 1064 E gas burner is equipped with interchangeable nozzles, one of which creates a vortex flame, the other – a thin stream for performance of delicate work. There is no gas spray in the kit, You must purchase any with a threaded connection EU (7/16).

The cost of the KEMPER 1064 E torch nozzle is about 5,800 rubles.

Advantages

  • There is a pre-heating flame to maintain it stability in any position of work;

  • Low gas consumption;

  • 2 nozzles for a flame in a set;

  • There is a piezo ignition and a flame regulator;

disadvantages

  • No gas cylinder included.

ROFIRE Piezo 1950 ° C

Rating: 4.7

ROFIRE Piezo 1950

In third place ranking is a gas burner for soldering with a lower flame temperature – up to 1950 degrees. Of this enough to work with soft solder in electronics and jewelry business.

The valve in the back of the handle is responsible for regulating the jet – not the most convenient, but it does not go astray in the process. For comfort on The burner head is supported by a support bracket. ROFIRE Piezo 1950 ° C not only for soft soldering up to 22 mm and hard soldering up to 15 mm, but also singeing paints, fire stripping.

Spray can not be supplied; must be purchased propane-butane or other mixture in a cylinder with a threaded connection EU (7/16).

The cost of a gas burner is not the highest – about 5,300 rubles.

Advantages

  • Convenient burner handle;

  • Suitable for singeing, stripping, soldering soft solders;

  • Precise flame control and support bracket;

disadvantages

  • No tank included;

  • Adjusting the power of the jet is inconvenient.

FOXWELD MT-55

Rating: 4.6

FOXWELD MT-55

The gas burner of the classic type FOXWELD MT-55 is designed for soldering and heating of metal parts, it is actively used for heating of frozen pipes, for melting soft and hard-melting metals in household, jewelry and industrial works. It useful in the absence of the ability to connect the welding machine to electrical network, but a relatively large gas consumption, for example, for thawing pipes. Also found in kitchens of restaurants where it is used for searing creme brulee, thawing meat.

The FOXWELD MT-55 device works together with a gas spray with propane-butane, isobutane-charged collet). The design of the device is collapsible from durable plastic with refractory mouthpiece.

The cost of the FOXWELD MT-55 device starts from 336 rubles.

Advantages

  • Universal use;

  • Connects to all cylinders with a collet clip;

  • There is a piezo and flame power control;

  • Suitable for refractory and soft melting metals;

disadvantages

  • Not the strongest design;

  • There is no cylinder in the kit;

  • The case is damaged;

STAYER 55584 MASTER

Rating: 4.5

STAYER 55584 MASTER

Closes the rating of burners for soldering device STAYER 55584 MASTER with a minimum of 1300 flame temperatures degrees Celsius. This is a straight nozzle cylinder nozzle equipped with piezoelectric element and flame regulator in the form of a screw handle. Burner works with cylinders on a collet connection and is applied mainly for soft materials, it is often used in cookery, suitable for tinning and heating, also helps out on alloys – boils water. According to reviews, product STAYER regularly performs its functions and practically does not exit system.

Cost STAYER 55584 MASTER the most affordable among represented by burners – about 305 rubles.

Advantages

  • Universal application in electronics, mechanics and Cooking

  • Ease of use;

  • Compact dimensions and weight;

  • Compatibility with any cylinders with a collet connection;

disadvantages

  • The minimum temperature.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply