9 best steel heating radiators

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Almost every modern house or apartment has heating system. One of the key roles in it is played by the radiator. It is this heater that is responsible for heat transfer in the premises. Today the market has a rich assortment radiators that differ in the material of manufacture, shape, efficiency and price. Most popular on domestic market are steel, aluminum and bimetallic products. Each of them has its own strengths and weaknesses. To choose the most suitable steel option, should follow the recommendations of specialists.

How to choose a steel heating radiator

  1. Heating devices made of steel come in two forms: panel and tubular.
  2. Simplicity, efficiency and affordable price stand out panel radiators. They are suitable for owners of private houses, in which the heating system does not create high pressure (up to 10 bar) and heats the coolant to a temperature above 70 ° C. Single panel models win in price, but are considered more powerful two-panel analogs. The advantages of this type include ease of installation, profitability, elegant appearance, rich a choice. Panel radiators also have disadvantages, the main of which is the low resistance of welds to water hammer. Therefore in central heating systems such appliances are used rarely.
  3. Tubular radiators have a traditional appearance. They are a set of vertical sections that communicate each other through the upper and lower headers. These appliances are more expensive, but withstand pressure up to 15 atmospheres, they are capable of work with hot coolant (up to 130 ° C), have a high heat transfer. It is important for the consumer to know about some of the shortcomings. This is a low corrosion resistance (especially with poor water treatment) and mechanical damage.
  4. Having decided on the type of steel radiator, you should correctly calculate the optimal sizes of sections or panels. Roughly accepted assume that for heating 1 sq. m requires about 100 watts of heat energy. Regarding the shape of the radiator, you should adhere to simple ratio. The length of the device should be at the level of 60-70% of window width.
  5. Buying a steel radiator, it is not superfluous to pay attention to a complete set. The most practical models will be equipped thermostat. To quickly shut off the battery in case of leaks must install a ball valve. A timely delete air from the heating system allows the Majewski tap.

Our review includes the 9 best steel heating radiators. All they received approval from the expert community and Russian consumers.

What is better than steel, aluminum or bimetal radiator

Radiator type

Advantages

disadvantages

Steel

+ reasonable price

+ stylish design

+ reliability

– low resistance to water hammer

– tendency to rust

Aluminum

+ light weight

+ high strength

+ modern look

+ profitability

– high price

– requires constant care during operation

Bimetallic

+ high pressure resistance

+ quick warm up

+ versatility

– high price

– big weight

Rating of the best steel radiators

Nomination a place Name of product price
The best steel panel radiators 1 Kermi FKO 22 500 600 5 071 rub.
2 ELSEN ERK 11 600 2 498 rub.
3 Purmo compact 21s 500 5 560 rub.
4 Buderus Logatrend VK-Profil 22 500 3 360 rub.
5 Stelrad Novello 21 500 4 894 rub.
The best tubular steel radiators 1 Zehnder Charleston 2180 1792 1 920 rub.
2 Purmo delta laserline 2180 11 104 rub.
3 Dia Norm Delta Standart 3057 20 530 rub.
4 Zehnder Charleston 3057 566 1 100 rub.

The best steel panel radiators

In the manufacture of panel radiators are quite simple, and therefore their price is affordable. Steel sheet exposed stamping and subsequent welding. As a result, one or multi-panel design. Experts liked a few modern models.

Kermi FKO 22 500 600

Rating: 4.9

Kermi FKO 22 500 600

A good budget solution when designing a heating system private home will use steel batteries Kermi FKO 22 500 600. The German manufacturer managed to get from the steel model good energy efficiency. Heat transfer rate declared on level 1158 watts. Therefore, one element is able to heat from 5 to 38 sq. m area of ​​the house. The device is designed for maximum temperature 110 ° C and operating pressure up to 13 bar. Battery capacity is 3.24 l, it has a thickness of 100 mm. For making a radiator stainless steel 1.25 mm thick is used. The experts gave the model first place in our ranking.

Users praise German batteries for quality Workmanship, elegant appearance and easy installation. TO the disadvantages of the model should include a high price.

Advantages

  • German quality;
  • good technical performance;
  • energy efficiency;
  • stylish design.

disadvantages

  • high price.

ELSEN ERK 11 600

Rating: 4.8

ELSEN ERK 11 600

The excellent design of the ELSEN ERK 11 600 radiator attracts attention buyers. The English device is made in different countries, therefore price may fluctuate. There is a multi-stage operation. quality control system. All operations are performed in automatic mode, minimizing the impact human factor. To make a heating battery 1.25 mm high-quality steel is used, the finished product withstands pressure up to 16 atm. Experts say serious anticorrosion preparation. It includes operations such as phosphating, priming and staining. Given the price accessibility, the model deserves the second place in the ranking.

The forums often compare steel radiators with ELSEN reference Kermi. But only original products deserve praise.

Advantages

  • affordable price;
  • reliable protection against corrosion;
  • tight control;
  • great design.

disadvantages

  • branch technology is not respected.

Purmo compact 21s 500

Rating: 4.7

Purmo Compact 21s 500

Finnish steel radiators Purmo Compact 21s 500 designed for heating systems of various types. You can connect to them as metal and polymer pipelines. The model is designed for maximum temperature 110 ° C, it was tested with a pressure of 13 atmospheres. Experts note a high rate of heat transfer, which reaches 3468 watts The largest modification of the device holds 16.5 liters coolant, which may be water or antifreeze. The radiator has a side connection, mounted on the wall the device is convenient thanks to adjustable holders.

The battery took third place in our rating, because in many user reviews not reliable enough anti-corrosion protection. Over time, the paint peels off, and leaks appear.

Advantages

  • acceptable price;
  • two-panel design;
  • beautiful appearance;
  • good heat dissipation.

disadvantages

  • poor corrosion protection.

Buderus Logatrend VK-Profil 22 500

Rating: 4.7

Buderus Logatrend VK-Profil 22 500

A worthy competitor to the rating leaders is steel radiator with bottom connection Buderus Logatrend VK-Profil 22 500. The affordable price of the heater is successfully combined with a high heat transfer (up to 5478 W). This allows you to heat the room. 54.6 square meters. m. Specialists emphasize resistance to high coolant temperature (up to 120 ° С), it is not present in this component equal. Structurally, the battery has two panels, the total thickness is 100 mm. In this case, one radiator will have to fill 18.9 liters water or antifreeze, this is not the most economical option.

Users have mixed opinions on resistance to corrosion. Some homeowners with good water treatment problems no, others complain of forced wear.

Advantages

  • high heat carrier temperature;
  • two-panel design;
  • decent heat dissipation;
  • bottom connection.

disadvantages

  • large volume;
  • short-term anti-corrosion treatment.

Stelrad Novello 21 500

Rating: 4.6

Stelrad Novello 21 500

Another steel radiator with a bottom connection got into our rating. Model from the Netherlands Stelrad Novello 21 500 may boast a heat transfer of 3459 watts. The product is designed for coolant temperature 110 ° С, pressure testing should not exceed 13 bar. The capacity of one radiator is 16.89 liters. The battery has a two-panel design, while its thickness is 77 mm. The device is equipped with a control valve, which simplifies thermal power setting. On the back of the battery there are mounting eyes with which mounting.

In general, the model is made with high quality, it looks stylish, but There are a number of disadvantages. The disadvantages include the high price, large volume of the radiator, difficulties with installation.

Advantages

  • elegant appearance;
  • small thickness;
  • bottom connection;
  • power adjustment.

disadvantages

  • high price;
  • high volume.

The best tubular steel radiators

Tubular steel radiators are a system of several vertical sections. They connect with each other in upper and lower point of contact. Tubular batteries differ in big heat emission and high cost. Specialists identified several decent devices.

Zehnder Charleston 2180 1792

Rating: 4.9

Zehnder Charleston 2180 1792

For many manufacturers, tube radiators Zehnder Charleston 2180 1792 are the benchmark. Therefore, in the domestic market you can to meet many copies that are cheaper, but in many ways worse than sample. German manufacturer boasts glorious history, the first steel tubular radiator was patented in 1930 by the founder of the company, Jacob Zehnder. Continuous development allows the brand to remain in the lead. The device has a domestic hygiene certificate obtained at the Novosibirsk Research Institute. Corrosion-resistant coating will not emit harmful compounds, therefore The radiator is recommended for use in child care facilities.

Installers and users in reviews praise the German battery on excellent quality and unique style. Only high price becomes a deterrent to buying.

Advantages

  • German quality;
  • deep historical roots;
  • classic style;
  • safe anticorrosion coating.

disadvantages

  • high price.

Purmo delta laserline 2180

Rating: 4.8

Purmo Delta Laserline 2180

Finnish manufacturer offers its customers the opportunity color picker. Purmo Delta Laserline 218 Tubular Steel Radiator it is completed with an assembly set with 4 points of fastening. Heating devices are available for sale, both with bottom and side connection option. Experts note the possibility of installation radiator and front and rear. Laser welding affects on perfect smoothness and evenness of seams. Seen from the side the shape of the outer pipes resembles the letter D, which affected series designation. This configuration is not selected from aesthetic considerations. Room heating is faster.

Both experts and users note the high quality of Finnish appliances. If they are inferior in any way to the leader of the rating, then only in higher price.

Advantages

  • high-quality welding seam;
  • possible to install front and back;
  • individual approach to the client;
  • stylish design.

disadvantages

  • high price.

Dia Norm Delta Standart 3057

Rating: 4.7

Dia Norm Delta Standart 3057

In a wide power range, the user can choose radiator Dia Norm Delta Standart 3057. Devices are delivered in distribution network in various versions, with bottom or side by connecting. For example, an 8-section version with side trim has a power of 512 watts, and for a 30-section counterpart this indicator reaches 2820 watts. In modern manufacturing, the radiator is not inferior to rating leaders. The battery is made of 1.25 steel mm Welding of elements is carried out using laser equipment, and the coating is applied by electrostatic spraying.

The quality of German products is at a high level, it users confirm in reviews. Difficulties arise only with independent connection. The model takes 3rd place in the rating.

Advantages

  • modern manufacturing technology;
  • high-quality assembly;
  • wide range of modifications;
  • nice appearance.

disadvantages

  • difficulties of self-installation.

Zehnder Charleston 3057 566

Rating: 4.7

Zehnder Charleston 3057 566

Another representative of the glorious German family hit the field view of the expert community. Zehnder Charleston Model Sections 3057 566 have a tubular shape, connecting in the collector part with using welding. With a radiator height of 570 mm, the width of the 10-section construction is 460 mm. Especially carefully approached manufacturer to protect steel products from corrosion. Five-stage the technology includes cleaning, priming, powder coating in electrostatics, drying and antistatic processing.

The model is inferior to the rating leaders in such technical parameters, as heat transfer (3420 W). In this case, the radiator looks more attractive in terms of cost.

Advantages

  • high-quality manufacturing;
  • operational safety;
  • reliable anticorrosive protection;
  • affordable price.

disadvantages

  • more modest specifications.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment