9 best pneumatic screwdrivers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Pneumatic screwdrivers are distinguished by the lack of an engine and simpler construction. It acted in a low weight and Allows you to use them without a time limit. For operation will need a powerful compressor and storage receiver. Such a pneumatic tool is practical in furniture factories and other assembly plants where a tough screwdriver is required, designed for everyday use. Let’s figure it out which pneumatic screwdriver is the best, for which we compare the nine most popular products of this type from global brands.

Rating of the best pneumatic screwdrivers

When compiling the TOP-9 of the best pneumatic screwdrivers, we took into account how tool specifications and customer reviews. That helped make a balanced description with the pros and cons of goods, therefore, the review will be without “pink glasses”.

Nomination a place Name of product price
Rating of the best pneumatic screwdrivers 1 Bosch 0 607 460 400 29 406 rub.
2 Senco SEN602C 14 628 rub.
3 Schneider Airsystems DRS 810 26 839 rub.
4 Senco SEN610 14 900 rub.
5 SUMAKE ST-4488 22 644 rub.
6 Metabo ds 14 8 449 rub.
7 JONNESWAY JAB-1017 8 420 rub.
8 Fubag SL120 5 382 rub.
9 Gross g208 6 525 rub.

Bosch 0 607 460 400

Rating: 4.9

Bosch 0 607 460 400

In the first place is a Bosch pneumatic screwdriver, which is designed for pressure 6.3 atm, and also needs 810 liters of air each a minute. Such a flow allows the pneumatic tool to unwind rigging up to 750 rpm. There is a valve on the back of the gun for adjusting the twisting force with parameters of 1.5-8 Nm. For connecting the air hose uses a 1.4-inch fitting with herringbone tip. Hose diameter from compressor must have a cross section of at least 10 mm, then the unit will work without loss of power. In reviews, users like the length 15 cm handles, suitable for people with large hands. Yet the owners are pleased with the relatively low weight of the gun, amounting to 800 g. It’s convenient to work with him all day, and the case almost does not get warm.

We marked this pneumatic screwdriver as the best due to the availability of depth gauge. This allows you to set the exact the degree of screw fastening and not damage the surface of the material, if it is fragile.

Advantages

  • strong case;
  • convenient to hold in your hand;
  • weight 800 g;
  • pressure and torque settings are provided.

disadvantages

  • high price;
  • loud work 84 dB;
  • it is difficult to connect a hose to the herringbone adapter;
  • powerful compressor required due to air consumption 810 l / min

Senco SEN602C

Rating: 4.8

Senco SEN602C

In second place is a pneumatic screwdriver from the American brand Senco, made in the L-shaped form of the body. The model has two rubber grip pads for improved grip reliability. Hex Chuck a pneumatic screwdriver can handle up to 800 rpm and tighten fasteners with a force of 14.7 Nm. Manufacturer took care of the ability to adjust the stiffness of the screw so that work with both soft and hard materials. For operation, a pressure of 8 atm and a compressor capable of provide 453 liters per minute. Weighs 1.1 kg pneumatic screwdriver and works with a volume of 78 dB.

The pneumatic screwdriver is interesting by the presence of a second handle, which can be rotated around the body 360 degrees. It’s not only improves grip reliability, but also facilitates pressure to make it comfortable press on the fasteners. Given that there is no percussion in this instrument features, this dual-handle configuration enhances performance on the background of similar devices with one handle.

Advantages

  • there is a reverse;
  • rubber pads on the handle;
  • strong steel case;
  • provides increased productivity;
  • light weight 1.1 kg.

disadvantages

  • while rotating, the second handle scratches the paint on the case screwdriver;
  • not very convenient to switch the reverse.

Schneider Airsystems DRS 810

Rating: 4.7

Schneider Airsystems DRS 810

Schneider pistol type pneumatic screwdriver Airsystems consumes 360 liters of air per minute, therefore it is less “gluttonous”, compared with the above participants. Body the tool is made of metal, and the handle is coated with anti-slip pads that increase grip reliability. The model works with pressure of 7 atm and spindle spins up to 1650 rpm. Wherein fastener tightness can be adjusted with a maximum of 8 Nm To connect to the compressor you will need a hose with an internal with a diameter of 9.5 mm. Reviews show that the screwdriver lies comfortably in hand, but abut with the second hand when pressed uncomfortable.

This pneumatic screwdriver is the best designed hose connection compressor to the gun. Usually this is a weak point, since bending the hose often kinks and then bursts. Accounted for him cut off and rearrange the fitting. Here, the manufacturer produces gun with an integrated communication segment, protected thick shell and having a tight metal crimp in place entrance. The hose from the compressor is already connected to a flat area after 50 cm, so it does not break.

Advantages

  • there is an adjustment of the tightening torque;
  • rubberized handle;
  • reliable metal case;
  • consumes 360 liters of air per minute.

disadvantages

  • high price;
  • slippery trigger;
  • the screwing depth is not adjustable.

Senco SEN610

Rating: 4.7

Senco SEN610

And here is another American model from Senco, which consumes 540 l / min of air at a pressure of 6.3 atm, and generates rigidity twisting up to 5.5 Nm. If necessary, the wrapping force can be lower to 0.5 Nm so as not to damage brittle material. The pneumatic screwdriver is made in a black metal case and endowed two rubber pads, so as not to slip in the hands. The manufacturer took care of the trigger ergonomic shape, convenient for long press with your finger. On the side there is a reverse. In reviews the model is liked by professionals with its narrow cartridge shape, facilitating access to small mounting holes and openings.

We put the pneumatic screwdriver on the list of the best due to the increased the number of revolutions not falling under load that are capable of develop spindle. This model can rotate at speed 1800 rpm Not all pneumatic ones are capable of this. aggregates, so choose this screwdriver for high performance when there is a large amount of assembly or disassembly.

Advantages

  • the finger does not slide off the trigger;
  • there is a reverse for changing the direction of rotation;
  • narrow cartridge configuration;
  • ergonomic shape of the handle.

disadvantages

  • Needs a powerful compressor due to a flow rate of 540 l / min;
  • constant lubrication required;
  • can only be purchased on order.

SUMAKE ST-4488

Rating: 4.6

SUMAKE ST-4488

And here is a professional pneumatic screwdriver from Taiwan SUMAKE brand. The model consumes 450 l of compressed air with pressure 6.2 atm Connection from compressor via threaded connection and fitting 1/4. So that the volume of air supplied is at the right level, you need a hose with an inner diameter of 9.5 mm. The pistol grip is completely covered with rubber, so the tool reliably holds even with active manipulations. But the weight of this models are slightly larger than the others and is 1.4 kg. In reviews customers like pneumatic screwdriver with high reverse lever, which is convenient to switch in thick work gloves.

We recognized the best pneumatic screwdriver in terms of tightening force. Among analogues it has a fairly high rate – 16.4 Nm. it allows you to wrap fasteners with a diameter of up to 7 mm. But if you need to screw something very delicately, then the tightening torque can be reduced to 5.1 Nm.

Advantages

  • the handle is completely covered with anti-slip material;
  • the case is resistant to damage during a fall;
  • reverse is convenient to switch even with work gloves;
  • able to function for a long time without overheating.

disadvantages

  • weighs 1.4 kg;
  • high price;
  • threaded fitting connection.

Metabo ds 14

Rating: 4.5

Metabo DS 14

The German brand “Metabo” developed the DS 14 pneumatic screwdriver, flowing 340 l / min at a pressure of 6.2 atm. His rigidity twisting is adjustable in the range of 5-14 Nm, and the rotation speed the hexagonal cartridge reaches 1800 rpm. Air tool weighs 1.2 kg The maximum diameter of the screw fasteners is allowed up to 6 mm Customers in the reviews are satisfied that these pneumatic screwdrivers, like all other products of “Metabo”, undergoes pre-sale training, excluding the implementation of marriage. This reduces the likelihood of buying. broken tool over the internet. Included manufacturer supplies three 1/4 nipples at once for a diverse organization connections (ISO, EURO, ARO). Another company gives a bottle of oil to You had everything you need to get started.

This model stands out for several advantages over analogues. Firstly, it has a very comfortable handle, which, in addition to The rubber lining also contains ergonomic finger cutouts. This configuration improves retention and reduces stress. in hand. Secondly, the pneumatic screwdriver vibrates at the level of 3.6 m / s², therefore, the wizard’s hand gets tired even less (in other models, the indicator from 4.0 m / s²).

Advantages

  • there is an adjustment of the tightening torque;
  • convenient reverse switch;
  • stably delivers declared power, regardless of load;
  • the handle is covered with rubber.

disadvantages

  • very noisy work 94-105 dB;
  • paint on the case is gradually erased.

JONNESWAY JAB-1017

Rating: 4.4

JONNESWAY JAB-1017

And here is another simple and very reliable pneumatic screwdriver from JONNESWAY. The tool runs on compressed air with a pressure of 6.2 atm, giving out 1800 rpm with a rigidity of the moment of an inhaling of 14 Nanometers. The metal case is not painted with anything, so the product retains pristine appearance, despite long-term operation. Lever covered with rubber and contains ergonomic cutouts. In reviews the screwdriver is pleasant to owners of a narrow form of the boss that comes in handy when screwing fasteners between closely spaced the details. More JONNESWAY Pneumatics Products 2 year warranty, which also encourages some opt for this product.

We noted the pneumatic screwdriver as the best in terms of compressed air air. For efficient operation, 120 liters per minute are required, and For this, you do not need a powerful compressor and a roomy receiver. But on performance is not inferior to those that consume 400-600 l / min, so the goods look much more profitable competitors.

Advantages

  • narrow cartridge shape;
  • comfortable grip;
  • the handle is completely covered with rubber;
  • Signed reversal switch directions.

disadvantages

  • reverse switch jumps at the slightest touch;
  • no torque adjustment.

Fubag SL120

Rating: 4.3

Fubag SL120

German brand “Fubag” produces one of the most powerful pneumatic screwdrivers with a tightening torque of 120 Nm. Tool holder able to spin up to 12000 rpm, greatly contributing to increase productivity. To connect a gun you need a hose with an internal diameter of 9.5 mm, as well as a pressure of 6.3 atm. The manufacturer has implemented a fundamentally different scheme for starting rotation reverse. The trigger is made in the form of a rocker arm and pressing on one side rotates clockwise, and clicking on the other edge starts twisting snap. The handle is fully rubberized and Don’t slip out of your hands. Excess air is vented through second channel in the handle of the gun.

In the reviews, buyers share that this pneumatic screwdriver is very helps out when working in tight spaces thanks to its length cases 165 mm. For other models, the length varies from 190 to 250 mm In addition to compactness and extreme power, the product is remarkable the most affordable price among analogues, which makes it the best.

Advantages

  • quick connection of the hose through the quick connection;
  • rubberized handle;
  • exhaust air outlet through the channel in the handle;
  • short length 165 mm for limited space.

disadvantages

  • very loud work;
  • uncomfortable trigger with reverse function.

Gross g208

Rating: 4.2

Gross G208

The review is completed by a pneumatic screwdriver from the Gross brand, which consumes 800 l / min with a pressure of 6.3 atm. For full work from compressed air, you need a 1/4 inch fitting and a hose with an internal with a diameter of 9.5 mm. The gun has a ring for adjustment torque with a maximum of 17 Nm. Includes Rapid connection and key. Airflow spins the blades air screwdrivers up to 700 rpm. Reverse Lever Switch, located to the left of the trigger, convenient for quick change direction of rotation. Rubber coated grip enhances grip reliability.

Our experts identified the pneumatic screwdriver as the best in terms of long-term readiness of the manufacturer to carry out free repair during the warranty period. This period is the largest and is 3 years, according to the company on the official website Gross-Tool Company.

Advantages

  • adjustable tightening torque;
  • narrow cartridge shape;
  • the handle is covered with rubber;
  • convenient rotation reverse switch.

disadvantages

  • Needs a large volume of air – 800 l / min;
  • weighs 1.5 kg.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply