8 top wheel hub manufacturers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Most of the Russian roads go to the wheel hub and to the bearing. The service life of these parts depends on quality. roadbed. The hub unit is durable a design consisting of a hub, bearing, snap ring, axis and fasteners. The main objective of the hub is to provide free rotation of the wheel in a fixed position. On the More than a dozen brands sell their products on the Russian market. Our partners will help you to choose a quality unit at an adequate price. experts.

Criterias of choice

Types of hubs. Depending on the type of transport drive The following types of hubs are used.

  1. Slave driven units mounted in front suspension a car that is equipped with rear-wheel drive. In such hubs, the axis fixed in the steering knuckle.
  2. Leading controlled models transmit torque from the engine to the wheels through a constant velocity joint (CV joint). This design is used in vehicles with front or full driven.
  3. Driven uncontrolled structures are placed behind in cars with front wheel drive. Usually these are non-separable models.
  4. Leading unmanaged nodes are placed on the rear axle in cars with rear-wheel or all-wheel drive. They transmit torque from differential to wheels.

The location of the hub. When choosing a new node should know the installation location. Hubs are left and right, as well as universal.

Design differences. There are several options. hub units. Durability often depends on their design. node.

  1. The simplest bearings that change separately from hubs; HUB-I generation products are completed.
  2. HUB-II generation units are more complex in design. IN The bearing is fixed on the suspension, they have a flange with mounting holes.
  3. Perfectly accurate dimensions and better corrosion protection hub units of generation HUB-III. Fixed design differs in ergonomics and ease.
  4. The fourth generation is even more advanced. In the hub the assembly, in addition to the bearing, also includes the CV joint.
  5. Well, HUB-V is a complex mechanism in which integrated hubs with brake discs. It should be noted that the fourth and fifth generation have not yet found mass application and are in the testing phase.

ABS system. Wheel hub selection affects the presence of an ABS system. With this modern option in the car requires a special unit with a magnetic touch or gear the ring. In the absence of this element, ABS will not work.

We selected 8 of the best wheel hub manufacturers in our review. All they sell their products in Russia. At the distribution of the place the editorial board was based on opinions expert community, given the reviews of domestic motorists.

Rating of the best wheel hub manufacturers

Nomination a place manufacturer rating
Rating of the best wheel hub manufacturers 1 ILJIN 5.0
2 ASVA 4.9
3 FAG 4.8
4 Kortex 4.7
5 Koyo 4.6
6 Aisin 4.5
7 Optimal 4.4
8 SKF 4.3

ILJIN

Rating: 5.0

ILJIN

The South Korean company chose a narrow specialization. ILJIN. Since 1978, she has been developing and manufacturing hubs wheel and wheel bearings. Experts appreciated high quality parts and reasonable prices. Products It is delivered on conveyors of automobile plants Hyundai and Kia. Approximately 80% The new cars of these Korean giants are equipped with ILJIN hubs. In addition, the manufacturer is an official supplier for VW. Today the company is expanding the range of spare parts already in catalog steering links, ball joints, angle modules. For all automotive components obtained quality certificates SO14000, ISO / QS9000. The brand ranks first in the review.

Russian motorists consider the best alternative original hub assemblies ILJIN. They are reliable and durability.

Advantages

  • high quality;
  • reliability;
  • durability;
  • acceptable prices.

disadvantages

  • not found.

ASVA

Rating: 4.9

ASVA

Attracts the attention of Russian motorists products Chinese company ASVA. First to be commended reasonable price of a nave of a wheel. The second important factor is manufacturer’s warranty on their products for a period of 6 months or 20 thousand km of run. The trademark unites 10 enterprises in China, all are equipped with modern facilities. Parts successfully passed certification procedure according to the standards NAMI ROSS RU.0001.11MT14, ISO 9000 and ISO 9001. In addition to the hubs, the manufacturer sells in Russian SHRUS market, axle shafts, anthers, water pumps, tension rollers, etc. The catalog contains parts for the entire range of European cars, Asia and America.

User reviews are dominated by positive ratings. hubs ASVA. But there were cases of a quick failure of the node.

Advantages

  • reasonable prices;
  • manufacturer warranty;
  • good quality;
  • a wide range of.

disadvantages

  • marriage goes on sale.

FAG

Rating: 4.8

FAG

Rich experience is the German company FAG. Since its foundation (1883) she specialized in the field of bearings rolling. The accumulated experience has allowed the brand to gain leading positions in the automotive market. The company is official wheel hub supplier to many well-known car factories. For aftermarket manufacturer is trying to find the best balance between price and quality. Brand enterprises have been certified in compliance with international standards ISO / TS 16949 and ISO 9001. Much attention is paid to quality control in factories to to exclude hit of defective parts to the consumer. The experts gave the brand the bronze of our review.

Domestic users are satisfied with the German quality of the hubs FAG. Only the price for many motorists seems high.

Advantages

  • high quality;
  • a rich experience;
  • a wide range of;
  • durability.

disadvantages

  • high price.

Kortex

Rating: 4.7

Kortex

Driver and passenger safety Korean company Kortex puts at the forefront. That is why the closest attention manufacturer pays quality. At the same time, experts admire competent pricing that the brand demonstrates on Russian market. Production sites are located in South Korea and China. They are focused on the production of hubs for European and Asian cars. When planning a business, seasonal demand for products, regional features. Thanks to flexibility the company manages to compete successfully with world leaders.

Analyzing the reviews of domestic motorists, it begs simple conclusion. High reliability and durability Korean nodes, which can not be said about products from the Middle Kingdom.

Advantages

  • Korean quality
  • competent pricing policy;
  • worthy assortment;
  • adaptation to Russian conditions.

disadvantages

  • brings products from China.

Koyo

Rating: 4.6

Koyo

Employees of a Japanese company know absolutely everything about bearings Koyo. Experts believe this is not surprising, because the company is engaged auto parts since 1921. Brand specialization has four directions: bearings, transmission, machine tools and control systems. The foundation of the business is a solid technological base and rich employee experience. Since 2006, the brand belongs to the concern JTEKT Corporation, which was formed by combining Koyo and Toyoda Machine. Among the latest brand new products It may be noted the creation of hybrid ceramic bearings. IN The catalog has hubs for a wide range of cars.

Russian users like the quality of Koyo hubs, Negative reviews are rare enough. The only motorists call the lack of high prices.

Advantages

  • Japanese quality
  • innovative developments;
  • a wide range of;
  • durability.

disadvantages

  • high prices.

Aisin

Rating: 4.5

Aisin

Another Japanese manufacturer is in the top 6 of our review. Aisin has been operating in the automotive components market since 1965. The brand specializes in producing parts for Japanese and South Korean cars. Not so long ago, the development of European markets began and America. Today in the catalog appeared wheel hubs for cars Ford, Volvo, Saab. Most parts go to conveyors of Asian car factories. Therefore brand products in a limited assortment happens in the trading network of Russia. The experts see in this a small plus, because the number of fakes is close to to zero.

Most reviews on topic forums are exclusively positive character. There are practically no complaints about quality. Motorists are unhappy only with poor equipment and high prices.

Advantages

  • high quality;
  • modern production;
  • Hi-tech;
  • durability.

disadvantages

  • poor equipment;
  • high prices.

Optimal

Rating: 4.4

Optimal

The German brand Optimal appeared in 1991. The company began its activity from the production of spare parts for suspension, engine, steering gear and brake system of the car. Thanks to an open dialogue with customers, the company managed to quickly gain confidence, surprised experts and growth dynamics. The manufacturer pays a lot of attention to product quality, not forgetting about the availability of spare parts. All products have quality certificates. IATF 16949: 2016 and ISO 9001: 2015. Unfortunately, the popularity of the brand led to the appearance of counterfeit goods. This fact influenced final position in our review.

Fakes often fall into the hands of domestic motorists. Such hubs fail after a few months. And here the mileage of the original components often exceeds 100 thousand km.

Advantages

  • German quality;
  • good feedback;
  • reasonable prices;
  • reliability.

disadvantages

  • There are fakes in the Russian market.

SKF

Rating: 4.3

SKF

Swedish closes the eight best manufacturers of wheel hubs SKF company. It was established in 1907, a small enterprise turned into a huge concern. Number of production sites exceeded 140, they are located in 32 countries. In Russia, brand representation appeared before the revolution, however, under the Bolsheviks, the Swedes had to leave our market. Today SKF products are manufactured at SKF Tver LLC, all of which goes to regions of the country. The experts did a comparative analysis of the hubs, made in different countries of the world. Their quality is fully responsive. requirements of international standards.

The only SKF problem in our country is a large number of fakes. The company is trying to protect its products from counterfeit, but so far little success.

Advantages

  • high quality;
  • developed distribution network;
  • modern production;
  • durability.

disadvantages

  • a lot of fakes.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment