8 best shock absorber manufacturers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

To combat the bumps in the car shock absorbers. To connect these nodes with the car body and suspension shock absorber supports are used. They differ in design and dimensions, durability and price. Today in the Russian market the whole range of shock absorber supports from different manufacturers. To choose the most suitable site for the price and quality, we suggest you get acquainted with the recommendations experts.

About faults and features

The purpose of the supports. The vast majority of modern cars have a shock absorber in the chassis. They are attached to the body through special elements that are commonly called supports. The main objective of these parts is to reduce vibration and fluctuations that occur when driving on rough roads coverage.

Design features of shock absorber supports. For fulfillment of tasks in front of supports, designers came up with several types of parts.

  1. Fixed supports are dish-shaped and bowl-shaped. it one-piece rubber part consisting of a steel sleeve or bearing and rubber cushion. They are connected to each other. vulcanization method. Such supports are most often installed in front suspensions. The presence of a sliding bearing makes turn the suspension strut free and easy.
  2. Composite legs are simple in design. They consist of spacer sleeve and upper and lower rubber damper. Details this type can be found in the rear suspension of small cars cars.

Typical support failures. The working node is working unnoticed by the driver, making the car comfortable. However with the steel sleeve or bearing wears out over time, delaminates rubber. As a result, backlash is formed, which leads to thuds when driving on rough roads. Sometimes clearly audible creak when turning the steering wheel. Delay in repair will lead to exit shock absorbers, and this will be completely different costs. To replace the support, you have to remove and disassemble the shock a rack. Therefore, experts recommend changing the support at each replacement of shock absorbers. Moreover, the item is inexpensive.

We selected 8 of the best manufacturers of shock absorber supports in our review. All of them sell their products on the Russian market. At the distribution of seats took into account the opinion of the expert community and reviews of domestic car owners.

Rating of the best manufacturers of shock absorber bearings

Nomination a place manufacturer rating
Rating of the best manufacturers of shock absorber bearings 1 Lemforder 5.0
2 Boge 4.9
3 Delphi 4.8
4 KONI 4.7
5 Monroe 4.6
6 AMD 4.5
7 Clickthrough rate 4.4
8 Hola 4.3

Lemforder

Rating: 5.0

LEMFORDER

One of the oldest and largest production concerns Auto parts in Europe is Lemforder. Brand name appeared in 1947 in honor of the village of the same name in northern Germany. In total there are 117 enterprises that are scattered over 22 countries of the world. The company specializes in plastic and rubber parts for the suspension and steering gear of a car. Experts are surprised at the long list of car factories on conveyors which Lemforder products are supplied. This is GM, Ford, BMW, Fiat, Toyota, MAN, Volvo, Mercedes, DAF, etc. Brand deservedly becomes the winner of our rating.

Users praise shock absorber mounts for durability, elasticity, resistance to Russian roads. By cons you can include only high prices, moreover, in the domestic market there are fakes.

Advantages

  • rich assortment;
  • German quality;
  • durability;
  • elasticity.

disadvantages

  • high price.

Boge

Rating: 4.9

Boge

Another German company is in the top three of our rating. Boge was founded back in 1929, and the first products enterprises were hydraulic shock absorbers and tools. Second experts gave the position to the brand for the optimal combination of price and quality. Shock absorbers and supports are installed on many models. VW, BMW, Audi, Volvo. The manufacturer has several series shock absorbers, under which there are supports with certain technical parameters. Creating new parts and components, Boge works closely with design divisions of car factories. The brand is considered one of the leaders in vibration suppression.

Domestic motorists in reviews praise shock absorber supports for strength, elasticity and affordable prices. Of the minuses there is a large number of counterfeit goods.

Advantages

  • strength;
  • elasticity;
  • affordable prices;
  • resistance to frost.

disadvantages

  • many fakes in the market.

Delphi

Rating: 4.8

Delphi

A reliable supplier of suspension elements in Russia is American company Delphi. Concern plants are located at 33 countries of the world, which produce about 14 thousand items details. The list includes shock absorbers, supports, sensors, filters, accessories for suspension and steering gear. Quality products, according to experts, depends on the place manufacture. The most reliable and durable are spare parts with factories located in the USA and Europe. A lot of domestic counterfeit is also found on the market. Therefore delphi becomes bronze medalist of our rating.

Users are attracted by the affordable price of shock absorber supports. They note that the highest quality parts have a dense plastic packaging with product information.

Advantages

  • affordable price;
  • good quality;
  • a wide range of;
  • strength.

disadvantages

  • a lot of counterfeit;
  • Quality depends on the location of the factory.

KONI

Rating: 4.7

KONI

In 1857 in Oud-Beyerland (Netherlands) a small family KONI began to manufacture and repair horse harness. After 75 years, a shock absorber was released in the workshop of this company. frictional type. In the postwar period in the Netherlands there were many American cars that needed to be repaired suspension parts. The Coning brothers got their bearings on time, rendering technical assistance to Ford and Jeep owners. Today the foundation KONI’s production is the development and production of shock absorbers and component parts for them. Many experts consider this brand a leader. world market. In the catalog you can find parts for a wide range car models from Europe, Asia and the USA.

Russian motorists had to face short-lived shock absorber bearings, which is reflected in the position in our rating.

Advantages

  • a wide range of;
  • affordable prices;
  • elasticity;
  • reliability.

disadvantages

  • fragility.

Monroe

Rating: 4.6

Monroe

A major player in the market for spare parts for American and European cars is Monroe. She was founded in 1916, starting its activity with the production of tire pumps. In 1926 Mr. American manufacturer manufactured the world’s first shock absorber. Today, the brand has many branches in America, Europe and Africa. Among the largest buyers are such auto giants as GM, Ford, VW, Mercedes and Nissan. In addition to shock absorbers and supports, experts highlighted installation and protection kits that increase reliability and knot durability. The brand is in fifth position in our rating.

Some car owners are unhappy with the packaging of spare parts, not all satisfied with the quality of the shock absorber supports. And here are the positive ratings earned affordability and reliability.

Advantages

  • new developments;
  • reliability;
  • wear resistance;
  • affordable price.

disadvantages

  • bad packaging;
  • a lot of fakes.

AMD

Rating: 4.5

AMD

Several Asian car factories took part in the creation of AMD company. The main objective of the brand is market promotion. spare parts for the GM, KIA, Hyundai and SsangYong lineup. Some parts are delivered to the conveyors of these auto giants, other products go to retail chains. Characteristic feature AMD, according to experts, is a wide range of automotive components. In addition to shock absorbers and supports, the manufacturer offers elements fuel system, parts for suspension, clutch, brakes, etc. e. Since products are manufactured in different factories, then quality products of the same purpose varies greatly.

The brand is in the top 6 of our rating at low prices and variety of spare parts. By cons, users include fragility.

Advantages

  • rich assortment;
  • low price;
  • adaptation to Russian roads;
  • beautiful packaging.

disadvantages

  • fragility.

Clickthrough rate

Rating: 4.4

CTR

South Korean company Central Corporation produces supports shock absorbers under the CTR brand. The company is considered the largest global auto parts manufacturer. She specializes in details. engine and chassis. Products are shipped to GM conveyors, KIA, Hyundai. Experts appreciated the modern research center in Changwon. For decent quality and reasonable prices, the brand falls into our rating.

At domestic motorists to the quality of the original products CTR no complaints. However, the Russian market is more likely to buy counterfeit shock absorbers that seriously undermine the image trademark. Therefore, in the reviews there is a lot of negativity regarding the fragility of spare parts.

Advantages

  • reasonable prices;
  • good quality;
  • own developments;
  • a wide range of.

disadvantages

  • a lot of fakes.

Hola

Rating: 4.3

Hola

Hola from the Netherlands closes the top eight of our rating. The manufacturer has been operating in the spare parts market since 1997. Experts praised the desire of the company to develop and introduce into production high-quality automotive components. At the enterprises of the brand introduced ISO / TS16949 quality system with strict controls on every stage of production. Supports are made of corrosion resistant steel by stamping, and elasticity rubber part is stored in a wide temperature range (-40 … + 50 ° С). The manufacturer declares the longevity of its products, the estimated service life is 100 thousand kilometers good roads.

Users confirm high quality and durability shock absorber support Hola. The disadvantages include high prices. and knot rigidity.

Advantages

  • high quality;
  • durability;
  • own developments;
  • reliability.

disadvantages

  • high price;
  • rigidity.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment