8 best profilers for profile

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Screening devices are used when installing partitions from drywall and installation of false ceilings. They allow temporarily connect the profile to each other by completing the preliminary assembly, after which the construction is fastened thoroughly by self-tapping screws to metal. The cutter consists of a bracket, an emphasis and a punch, and also two handles acting as a lever. To choose wisely such mites for professional work or repair in do-it-yourself apartment, pay attention to our list of the best surveyors containing technical information and reviews.

Rating of the best profilers for a profile

When compiling the TOP-8 screeners for profile mounting, we guided by key characteristics, which include: maximum cross-section, tool weight, ease of use one or two hands, workmanship and service life. Also ours experts paid attention to the reviews of masters on specific positions to better understand the pros and cons of the product in real operation.

Nomination a place Name of product price
Rating of the best profilers for a profile 1 KNIPEX 9042340 9 238 rub.
2 MATRIX 87951 925 rub
3 Encore 51651 1 170 rub.
4 STAYER 250 mm 31381 1 301 rub.
5 Encore 51650 1 130 rub.
6 Sparta 87952 611 rub
7 DEXX 31391 389 rub
8 Encore 51652 578 rub

KNIPEX 9042340

Rating: 4.9

KNIPEX 9042340

In the first place, experts put the goods from the company KNIPEX. it professional profiler designed for profile section up to 1.2 mm (0.6 mm on each side). Staple configuration allows connect both U-shaped and square profile. Tool It has a high margin of safety, because it is assembled on thick axles. It is convenient to hold the screener thanks to the two-component handles with stops. Masters in reviews share that for work shortcutter requires minimal effort since long levers simplify the compression of the walls of the profile. But it plays the opposite role, because you have to hold inventory with two hands, and in In some cases, you can’t do without an assistant. More owners are happy the ability of the cutter to bend the cut walls to an angle of 90 degrees.

We put the cutter first because of the high quality execution of both levers on the axes, and the punch itself with emphasis. The device for fastening the profile will last up to 25 years at everyday professional use.

Advantages

  • high limiters for hands;
  • black oil-hardened steel;
  • sifting 1.2 mm in thickness;
  • minimum compression force.

disadvantages

  • hold the screener with two hands;
  • weighs almost 1 kg;
  • a small depth of the bracket leads to a close location of the screws in future;
  • high price.

MATRIX 87951

Rating: 4.8

MATRIX 87951

Under the brand MATRIX, a professional screener is sold, made of tool steel. His punch is tempered in oil to increase strength. Use it to connect profile 27×28 and even 60×27 mm. When cutting through a galvanized wall it turns out a conical hole that holds two sides between themselves. Subsequent fastening with screws is carried out without extra effort. Two rubberized handles prevent slipping ticks even in sweating hands. In the reviews, the masters are glad that it is possible to fix the profile with this handheld with one hand, therefore during installation, you can do without an assistant.

We found the product the best because of the extra thick staple, which increases overall structural strength. Reinforced Notch Useful to cut the profile section up to 1.5 mm. If with with time, the axles will wear out and play will appear, they can be replaced, since these places are not rivets, but bolts connections.

Advantages

  • rubber handles do not slip in the hands;
  • made of durable steel;
  • You can work with one hand;
  • replacement of worn axles is provided.

disadvantages

  • no locking handles for transportation;
  • weak return spring.

Encore 51651

Rating: 4.7

Encore 51651

This model for mounting profiles under drywall is very similar to previous, except for the shape of the bracket, which is more rectangular, not semicircular. Punch movement by transmitting force from the lever through three axes. Rubberized notch handles increase grip reliability. Due to availability return spring increases usability – all manipulations are not difficult to perform with one hand. In the reviews, the owners are satisfied ease of leverage and maintainability of the screener. Small length 25cm allows you to start inventory in the most bottlenecks, for example when assembling niches or installing a false ceiling, close to main overlap.

Such a screener is also a reinforced type and it is intended for temporary connection of profile walls with a section up to 0.8 mm, which in total allows piercing a thickness of 1.6 mm. Choose this product to work with a thick profile.

Advantages

  • possibility of replacing axles;
  • comfortable handles;
  • relatively light weight 500 g;
  • there is a return spring.

disadvantages

  • handles are not blocked from spontaneous closing;
  • the connection diverges easily under load.

STAYER 250 mm 31381

Rating: 4.6

STAYER 250 mm 31381

The STAYER brand offers a 25 cm long screener, which convenient for the construction of free-standing drywall partitions. The punch is capable of piercing metal with a cross section of 1.2 mm. Weigh the product is 530 g, so it doesn’t tire your hands much. Owner reviews show that the mites are assembled efficiently, easily cut through the profile and unfold the walls for fixation. You can work with the tool with one hand, which improves productivity and does not require an assistant. The notch punch is made of high strength steel and retains its shape for a long time. If necessary, it can be replaced, why the company sells individual items.

Our experts put the surveyor in a review of the best due to the availability three layers of rubber on the handles. This greatly enhances usability. grip and prevents the appearance of calluses during daily operation.

Advantages

  • reinforced throat design;
  • strong tool steel;
  • compact dimensions with a length of 25 cm;
  • possibility of replacing axles.

disadvantages

  • it is difficult to crawl to the profile from the wall;
  • the wiring of the bracket allows you to fix only the rack profile to guide rail.

Encore 51650

Rating: 4.5

Encore 51650

Continues the review of the best screener from the Enkor brand, which has a length of 30 cm and is designed to work with two hands. Behind due to the extended levers, the tool conveniently fastens the profile under ceilings with a height of 3-3.5 m. A small bracket allows push the working head of the screener into the most inaccessible places that owners like in reviews. More buyers praise the quality of the bending of the metal, as well as the ability to make notches in different places, changing the angle of the institution snap. Despite the small staple, the claws were pretty strong, therefore able to connect the profile with a total thickness of 1.6 mm.

According to the editorial staff of the magazine, the notch is the best for fastening profile with a high bent side at the ends of the U-shaped (rackmount). To do this, the design of the device provides opening of the pharynx by 16 mm, versus 5-8 mm, as in competitors. Such functionality is great for mounting reinforced galvanized profile in the places of installation of interior doors, where there will be more load from popping sash.

Advantages

  • anti-slip handles;
  • strong steel construction;
  • ergonomic cutouts;
  • compact bracket.

disadvantages

  • requires simultaneous involvement of two hands;
  • not everywhere you can buy.

Sparta 87952

Rating: 4.4

Sparta 87952

And here is a more affordable price tracker from the Sparta brand. The device is designed for two-handed use and contains punch with roller stop. But the return spring is here no, so after each squeeze you have to unclench the handles, to remove the punch. Users praise the product for its soft work and metal rotation 90 degrees. Tool weighs 750 g and is capable of fasten steel with a cross section of 1 mm. Rubber handles are designed large hands so that the user does not come into contact with the iron. IN unlike competitors, it has not a solid, but a welded structure staples, which explains its reduced cost. But the welds high-quality, so on the strength of the tool it is not affected.

This screener is simpler than the above models, since his leverage design transfers force to the punch only through one axis. Therefore, the model is easier to repair, in case the backlash appears over time. Eliminate slackness is quite realistic with your own hands.

Advantages

  • more affordable price than competitors;
  • rubberized handles;
  • high-quality welds;
  • absolutely smooth front side of the profile.

disadvantages

  • two hands required;
  • no return spring;
  • a high upper lip is not included in all profile types.

DEXX 31391

Rating: 4.3

DEXX 31391

A similar model, only from the German brand DEXX. Cutter for working with the guide profile, since in the rack head just does not fit. In reviews, customers share what they use. it for assembly of boxes for batteries or work with a profile of 27 mm. The craftsmen are pleased with the quick puncture of galvanized steel and the fact that the operator does not need to make much effort. Made screener in China, but under the control and technology of a German company. Simple design and assembly of a bracket from several elements through welding contribute to lowering its cost, in comparison with other competitors. Screener weighs 700 g and length The tool is 30.5 cm.

In our opinion, the cutter is the best among analogues because of the special handle material. It is a porous rubber that does not rub the skin. hands. Pads are cast, so they do not fall off when heavy use. The material absorbs sweat well and enhances grip reliability.

Advantages

  • unpretentious to use;
  • long levers do not require effort from the user;
  • convenient for mounting false ceilings with a height of 3 m;
  • thick rubber handles;

disadvantages

  • there is no spring in the return mechanism;
  • does not go into the rack profile.

Encore 51652

Rating: 4.2

Encore 51652

The review is completed by another two-hand screener, which has 30 cm long and designed to pierce a cross section of 1.6 mm. The manufacturer endowed the tongs with an anti-slip coating of handles, so that the master can confidently hold them in his hands. Although in the characteristics indicated that the snap tool to bend, but in practice this does not happen. Motion punch forward is carried out by a roller pusher, and retraction provides a protrusion on the movable part of the lever. Total the design is made of stainless steel and does not require staining. The punch itself is molded from carbon steel ШХ15 and differs in the increased durability.

Although this is a household walker, customer reviews show that he is able to pierce three Knauf profiles at once at once 0.6 mm each, totaling 1.8 mm. It exceeds Specifications declared by the manufacturer the best pressing force, which is suitable for installing partitions in wall shifts in the apartment.

Advantages

  • easily penetrates steel;
  • affordable cost;
  • able to penetrate up to 1.8 mm;
  • well lies in the hands.

disadvantages

  • regularly wedges on the way back;
  • does not always bend the “mustache”;
  • not the best quality welding base punch.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply