8 best manufacturers of oil scraper caps

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

When a gray smoke appears from the exhaust pipe of a car, it talks about the ingress of engine oil into the combustion chambers. One of common causes is wear on oil seals. At such a malfunction increases oil consumption, are covered with soot and carbon black parts of the piston group and exhaust tract. Car already does not comply with environmental standards, so put off repairs not allowed. Before choosing valve stem seals, you should understand purpose and identify the main requirements for these small to the details. Tips will help us to cope with a difficult task experts.

Criterias of choice

Purpose and principle of action. In the internal engine all friction parts during combustion receive a portion engine oil. Lubrication is required for valve stems and guide bushings. There is a gap between these parts, through which oil can enter the combustion chamber. To prevent of this, valve seals or valve stem seals are used. IN as a material for the manufacture of parts used reinforced rubber, flexible PTFE and fluororubber. The glands are pressed against the valve stem by annular springs.

Requirements for valve stem seals. On valve seals several factors have a negative effect. It is to them parts must have increased durability.

  1. Inside the engine, the temperature during the combustion of the fuel mixture reaches 1800 ° C. Therefore, the first requirement for oil seals is resistance to high temperature.
  2. High-quality removal of an oil film from a valve core is possible only with a snug cap. Therefore second an important factor in quality detail is elasticity material.
  3. Since the gland has to work in harsh conditions constant friction, another important requirement will be wear resistance. On average, good valve stem seals withstand about 100 thousand kilometers.
  4. How many valve stem seals you need to buy depends on the type malfunctions. If natural wear has occurred due to large mileage, then the whole set changes. But it often happens that one oil seal failed (a crack appeared, burst spring). In this case, you should pick a cap similar size of the same material.

We selected 8 best oil scraper manufacturers caps. All of them sell their products on the Russian market. When allocating seats, the editorial board took into account the opinion expert community and reviews of domestic motorists.

8 best valve stem seals manufacturers

Nomination a place manufacturer rating
8 best valve stem seals manufacturers 1 Elring 5.0
2 Victor reinz 4.9
3 Corteco 4.8
4 Ajusa 4.7
5 Goetze 4.6
6 Nok 4.5
7 Glazer 4.4
8 Payen 4.3

Elring

Rating: 5.0

ELRING

An old-timer in the auto parts market in Europe is German company Elring. It was founded in 1879 by Paul Lehler and Initially engaged in gaskets and technical products. With the development of the company opened up new production sites in Austria, South Africa, South Korea, China, Turkey. A special place in the finished product catalog is occupied by various engine oil seals. Experts note a wide selection sizes, designs and materials. To quality and appearance in no complaints, you can reduce the service life only incorrect actions during replacement. Brand takes first place in our review.

Many car dealers advise their customers when buying valve stem seals give preference to Elring. They are OK will serve in the car for many years.

Advantages

  • elasticity;
  • high-quality manufacturing;
  • rich assortment;
  • durability.

disadvantages

  • not found.

Victor reinz

Rating: 4.9

Victor Reinz

The Victor Reinz brand was born through the merger of an American firm Victor and the German company Reinz. And in 1993, a joint venture joined the Dana holding, becoming the largest producer auto components. In total, about 90 production facilities operate in the world. sites that are located in 25 countries. Among partners trademarks should highlight the auto giants Ferrari, VW, Fiat, Ford, Renault, Volvo. In the catalog, in addition to valve stem seals, you can Find gaskets for the engine, oil seals, cylinder head bolts and sealants. The only brand problem in our country is the availability fakes. Experts advise to carefully study the packaging and stickers on it.

The same problem worries domestic motorists. They on forums often discuss techniques for identifying the original products.

Advantages

  • high quality;
  • rich assortment;
  • effective oil removal;
  • long service life.

disadvantages

  • a lot of fakes.

Corteco

Rating: 4.8

CORTECO

Another brand has a German residence, although it was founded in Italy. Corteco produces spare parts for cars with 1932, and the first detail that came off the assembly line was an oil seal. Today, the plant is part of the Freudenberg group, the main specialization remain rubber products, filter elements, parts for interior trim. In total, the Corteco catalog has over 20 thousand items of parts. Seals gained special fame Simmerring, which are equipped with many new cars Ford, BMW, Nissan, Opel. Experts appreciated the oil scraper catalog caps where there was a place for domestic cars.

The quality of spare parts Corteco users have no complaints. Most motorists care about a large number counterfeit.

Advantages

  • elasticity of rubber;
  • high-quality assembly;
  • wide range;
  • durability.

disadvantages

  • a lot of counterfeit.

Ajusa

Rating: 4.7

Ajusa

The largest manufacturer of automotive components in the world is considered Spanish company Ajusa. On all continents, the brand has its own production capacity. This allows you to quickly deliver accessories for conveyors of automobile plants Nissan, Daewoo, Seat, and also maintain a wide range of spare parts in retail chains. Experts have highlighted the concern’s science and technology center, where new parts are constantly being developed. Products match requirements of international standards ISO / TS16946, ISO 9001 (according to quality) and ISO 14001 (for ecology). The catalog presents valve stem seals, gaskets for the engine, camshafts and much more.

Domestic motorists who delivered oil scraper Ajusa caps, pleased with their work. The main thing to distinguish when buying the original is from a fake.

Advantages

  • high quality;
  • perfect handling;
  • exact dimensions;
  • affordable prices.

disadvantages

  • a lot of fakes.

Goetze

Rating: 4.6

GOETZE

The fame of the German company Goetze in the world provided cylinders, piston rings and gaskets for the engine. Praised experts and valve stem seals from this manufacturer. Special Germany is focusing on protecting its products from counterfeiting. The packaging contains a hologram, stickers and barcodes, and on the caps are cast the first three letters of the company name, plant number, size and lot. The company supplies spare parts for conveyors automobile concerns Ford, BMW, Fiat, Renault. In the catalog you can find caps for Russian cars.

Users periodically in reviews complain about fakes, with which have to face. But motorists say relatively short service life of oil scraper caps (15-20 thousand km) due to loss of elasticity.

Advantages

  • many degrees of protection against fakes;
  • high-quality processing;
  • a wide range of;
  • effective oil removal.

disadvantages

  • limited service life.

Nok

Rating: 4.5

Nok

Nok’s founding date is 1939, when in Japan Japan Bearing Production Co., Ltd. Current The name was issued in 1985. The concern has many branches in different countries in Asia, where quality seals are produced and seals. The brand is an official supplier of automotive components to the factories of Toyota and Honda. According to experts, the original quality is found in valve stem seals made in Japan. Affiliates are slightly inferior in durability, but there are also counterfeit products, where you can’t talk about quality.

In the Russian market, the probability of buying a fake is higher than purchase of original spare parts. Therefore, the brand closes the TOP-6, despite the long life of the original caps.

Advantages

  • high quality original (OEM);
  • acceptable price;
  • durability;
  • exact dimensions.

disadvantages

  • unstable quality at branches;
  • a lot of fakes.

Glazer

Rating: 4.4

Industrias Serva

Glazer brand owned by Spanish company Industrias Serva S.A., which was founded in 1964. The company specializes in production of sealing parts for automobiles. In the list manufactured products gaskets for engine, seals, valve stem seals, sealants and more. Experts included trademark in our review for a huge range of spare parts. Besides Moreover, all products meet the requirements of international ISO 9001 and QS 9000 standards. Some automotive components go to distribution network, and part – sent to the conveyors of Ford factories, Nissan, Suzuki, John Deere.

However, in the reviews, many domestic motorists complain about short service life of Glazer caps. One of the reasons the experts called the loss of elasticity of the rubber element over time.

Advantages

  • reasonable prices;
  • rich assortment;
  • exact dimensions;
  • good protection against fakes.

disadvantages

  • fragility.

Payen

Rating: 4.3

Payen

Closes the TOP-8 of the best manufacturers of valve stem seals French company Payen. It was founded back in 1890, and the name was given in honor of the head of the combined enterprises Etienne Payen. The brand’s first products were copper and asbestos washers. Since 1998, the brand belongs to the American concern Federal Mogul. The assortment of the company consists of 10 thousand. items, deliveries are made to 100 countries. For today day the brand is known to a narrow circle of Russian motorists. This, by expert opinion is a positive factor, because fakes there is practically no market.

A few user reviews are exclusively positive character. Caps retain their operating parameters many years, providing high-quality removal of an oil film.

Advantages

  • good quality;
  • rich assortment;
  • acceptable prices;
  • durability.

disadvantages

  • low fame in Russia.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment