8 best gas cutters and electric cutters

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Concrete cutters are a successful symbiosis of the grinder and circular saw. These powerful tools are designed for cutting. asphalt, concrete, brick, stone, metals and pipes. Recently it was possible to meet concrete cutters in the hands of road workers, rescuers or builders. Today the price of gas cutters and electric cutters has become affordable and for home masters. Having such a technique in your hands, you can safely undertake laying of paving slabs or replacing wiring in panel or brick house. Choose the best technical recommendations of our experts will help the parameters of the concrete cutter.

How to choose a gas cutter

Engine’s type. All concrete cutters can be divided into two groups.

  1. The most popular are gas cutters. Technique of this type equipped with small gasoline powered engines. It indispensable in professional activities, cutters are suitable and owners of private houses under construction.
  2. Electric cutters are equipped with electric motors. It can be products connected to a household network (220 V) or stand-alone devices with a built-in battery. Concrete cutters of this type are usually used by home craftsmen to perform small volumes works.

Cutting method. You can cut concrete, stone or brick as dry and wet.

  1. In the first case, a large amount of dust is formed, which enters the tool body, reducing service life. Dry way Suitable for cutting metals.
  2. To use wet cutting, there must be It is possible to supply water to the working area. Water is not not only precipitates dust, but also cools the saw blade, prolonging it life time.

Engine power. Depending on the goals motor power is selected.

  1. In professional activities, when you have to constantly work with reinforced concrete or stone requires gasoline technology power from 5 l. from. With asphalt or brick, they do a good job gas cutters with an engine of 4-5 liters. from.
  2. For home use, they are suitable as gas cutters (from 4 hp.), and electric cutters (from 2 kW).

Depth of cut. The choice of concrete cutter also depends on the depth drank it up. The tool should provide a cut of about 10-20% more than required. For example, if you have to work with concrete a plate with a thickness of 150 mm, it is better to purchase a tool with maximum cutting depth 170 mm.

The diameter of the disk. All concrete cutters are designed to be used. cutting discs of a certain size. Circle diameter limited protective cover, which is necessary for safety reasons. IN in the professional sphere, discs with a diameter of 350-400 mm are used, in households often have enough cutting wheels of 200-300 mm.

Air cleaning. Any concrete cutter forms a large the amount of dust, even when using the wet cutting method. Therefore, manufacturers install special cleaning systems air. The more filter elements used in technology, the longer its service life. Even in household appliances, the minimum should There are two filters (external and internal).

Vibration protection. Concrete or stone work accompanied by strong vibration, which is transmitted to the hands the operator. When buying a gas cutter, it is important to pay attention to the availability soft cover handles, vibration damping systems and special shock absorbers.

We selected 8 of the best gas cutters and electric cutters in the review. Most of them are widely represented in Russian stores. At the distribution of positions in the ranking took into account the opinion of an expert communities and reviews of domestic users.

Rating of the best gas cutters and electric cutters

Nomination a place Name of product price
The best gas cutters 1 Oleo-Mac 963 TTA-14 3000 W 4.1 HP 350 mm 57 990 rub.
2 STIHL TS 800 5000 W 6.8 HP 400 mm 84 490 rub.
3 Husqvarna K 970-14 6.44 KM 350 mm 78 596 rub.
4 Wacker Neuson BTS 635s 4,300W 5.8hp 350 mm 75 000 rub.
5 Solo 880-12 4000 W 5.5 HP 300 mm 39 000 rub.
6 Makita DPC7330 4200 W 300 mm 40 486 rub.
The best electric cutters 1 Messer C14 2800 W 355 mm 63,454 rub.
2 STIHL TSA 230 230 mm 25 990 rub.

The best gas cutters

With the most difficult tasks during construction work able to handle gas cutters. This technique is long lasting. runtime, autonomy and high performance. Experts appreciated the capabilities of the following aggregates.

Oleo-Mac 963 TTA-14 3000 W 4.1 HP 350 mm

Rating: 4.9

Oleo-Mac 963 TTA-14 3000 W 4.1 HP 350 mm

The highest ratings in reviews are given by domestic consumers. Oleo-Mac 963 TTA-14 Gas Cutter. This model does not have a record power (4.1 hp), but at the same time allows you to work with the disk diameter 350 mm. Experts note excellent value for money qualities that allows the equipment to occupy the top construction of the pedestal in our rating. The model earned praise from specialists for ease of use. The manufacturer successfully distributed the weight in the central part of the instrument, so the hands do not get tired when long work. And given the light weight (10.4 kg) and anti-vibration system, then the cutter is suitable for professional activity.

Users are satisfied with the quality of the tool, its performance and availability. Only gas should be poured High Quality.

Advantages

  • high-quality assembly;
  • affordable price;
  • ease of use;
  • light weight.

disadvantages

  • demanding on the quality of gasoline.

STIHL TS 800 5000 W 6.8 HP 400 mm

Rating: 4.8

STIHL TS 800 5000 W 6.8 HP 400 mm

Heavy duty high performance equipment is STIHL TS 800 gas cutter. The device is equipped with a gasoline engine capacity of 6.8 liters. sec., spindle speed reaches 9000 rpm It is allowed to install a large cutting disc on a gas cutter (400 mm), providing a cut depth of 143 mm. Manufacturer took care of operator comfort by installing anti-vibration the system. This full-fledged professional tool takes second place in our ranking. He is inferior to the winner in value and weight (12.7 kg).

Russian builders are satisfied with performance and power German gas cutting, cutting depth, ease of operation. Model extremely reliable and unpretentious. The disadvantages of users include high price and heavy weight.

Advantages

  • high power
  • large cutting disc;
  • resourcefulness;
  • reliability and durability.

disadvantages

  • high price;
  • a lot of weight.

Husqvarna K 970-14 6.44 KM 350 mm

Rating: 4.7

Husqvarna K 970-14 6.44 HP 350 mm

Swedish gas cutter Husqvarna K 970-14 is designed to perform heavy cutting of asphalt, stone or concrete. He finds wide application in construction and road spheres. The equipment is equipped powerful gasoline engine (6.44 hp), thanks to which you can use large diameter cutting discs (350 mm). And even for with these parameters the model is inferior to the eternal competitor from Germany, but the cost of the Swedish unit looks preferable. Experts drew attention to the built-in auto-compensation system SmartCarb, which maintains power when the filter is dirty. This reduces fuel consumption.

Users have no complaints about the work of a gas cutter, they are satisfied power to weight ratio (11 kg). The model takes the prize place in our ranking.

Advantages

  • power and lightness;
  • auto compensation system;
  • wear resistance;
  • low vibration.

disadvantages

  • high price;
  • expensive service.

Wacker Neuson BTS 635s 4,300W 5.8hp 350 mm

Rating: 4.6

Wacker Neuson BTS 635s 4300 W 5.8 HP 350 mm

Experts left the most pleasant impressions after the test Wacker Neuson BTS 635s. The model is simple and reliability, convenience and comfort in work. The manufacturer has equipped its product with a gasoline engine with a capacity of 5.8 liters. with. that allows the use of discs with a diameter of up to 350 mm. In this case, the depth the cut is limited to 122 mm. Rugged housing protects well critical components from dust and moisture. Designed for gas cutting special trolley and 20 liter water tank. With such equipment you can cut concrete or asphalt for a long time.

The model stops a step from the podium of our rating, i.e. K. builders note the instability of the apparatus. With sharp reinforced concrete foundations the model copes with difficulty.

Advantages

  • simplicity and reliability;
  • German quality;
  • strong case;
  • convenience in work.

disadvantages

  • hard to cut reinforced concrete.

Solo 880-12 4000 W 5.5 HP 300 mm

Rating: 4.5

Solo 880-12 4000 W 5.5 hp 300 mm

German petrol cutter Solo 880-12 is in our rating for optimal a combination of affordability and functionality. Model does not have high power (5.5 l. from.), so the maximum disc diameter is limited to 300 mm. The depth of cut is 125 mm. But the manufacturer installed an automatic engine start system, automated the process of mixing gasoline with oil, installed vibration cleaning of the air filter. Gas cutter can be used as for dry and wet cutting of stone or concrete.

Users praise gasoline for ease and precision weight distribution. The presence of modern options makes work comfortable and carefree. There are problems with heat dissipation, so more often need to take breaks in work.

Advantages

  • lightness (10.2 kg);
  • affordable price;
  • many useful options;
  • exact weight distribution.

disadvantages

  • limited performance;
  • heats up quickly.

Makita DPC7330 4200 W 300 mm

Rating: 4.4

Makita DPC7330 4200 W 300 mm

The easiest gas cutter in our rating was the Makita model DPC7330. This compact and comfortable motor vehicle is equipped with an engine. 5.7 liter capacity with. that allows to use cutting wheels 300 mm in diameter (landing hole 20 mm). In this case, the depth the cut is limited to 97 mm. Experts appreciated five-step air cleaning, thanks to which the tool has increased performance. Protective cover easy adjustable, making the operator’s work safe.

Domestic builders liked the lightness and compactness models, fast engine start, reasonable price. Gas cutter causes increased interest among potential buyers on the NM (3135 product card views for 2 months).

Advantages

  • affordable price;
  • lightness and compactness;
  • effective air purification;
  • safety.

disadvantages

  • a small depth of cut.

The best electric cutters

For home craftsmen, a good alternative to petrol become electric cutters. These devices can work from household network or built-in battery. They are affordable but the scope of the power tool is limited. To specialists I liked the work of several models.

Messer C14 2800 W 355 mm

Rating: 4.9

Messer C14 2800 W 355 mm

Messer C14 electric concrete cutter has gained popularity with Russian professional builders due to simplicity and high quality workmanship. With this tool you can cut brick and stone, asphalt and reinforced concrete. The manufacturer both dry and wet cutting is provided. Experts highlight high power models (2.8 kW) and electronic engine protection against overload. With the integrated water supply system, you can regulate disk cooling. You can set cutting wheels diameter up to 350 mm, and the depth of cut is 125 mm. Electro cutter wins our rating.

The users liked the high performance of the device, ergonomics and balance. Too bad to buy a device difficult enough, because it is discontinued.

Advantages

  • high power
  • deep cut;
  • overload protection;
  • convenience in work.

disadvantages

  • rarely found on sale.

STIHL TSA 230 230 mm

Rating: 4.7

STIHL TSA 230 230 mm

Difficult to compete with the STIHL TSA 230 cordless electric cutter winner of our ranking in power and performance. But in mobility and lightness (3.9 kg) the model will give odds to many. German the manufacturer has provided the ability to work with different batteries (voltage 36 V). Experts consider the best option use of an AP 300 battery. Maximum cutting diameter the disc is limited to 230 mm, while the depth of cut is 70 mm It is possible to connect the device to a water source in a matter of seconds due to quick coupler.

Domestic users in reviews praise the tool for reasonable price, reliability, maintenance even at frost. Only the duration of the work is not enough to carry out major construction operations.

Advantages

  • mobility and maneuverability;
  • ease;
  • affordable price;
  • stable work in the cold.

disadvantages

  • limited opportunities.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment