8 best battery engravers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

A lot of useful work in everyday life and in a creative workshop is capable of make a battery engraver. The device does not have high power, so the scope is limited to small blanks. The device can handle not only soft materials (wood, plastic), but also with different types of metals. If the master has the necessary equipment, the engraver can perform operations such as cutting, grinding, grinding, milling, drilling. A wide range of products is presented on the domestic market battery dremel. Choose the best price and The technical parameters of the model will help our recommendations experts.

Selection recommendations

Disk rotation speed. For an engraver one of the most important Specifications is the shaft speed. Than the larger this value, the higher the productivity demonstrates the device. This parameter is selected taking into account the diameter. equipment recommended for use in the tool. Than the larger the diameter of the disk (circle), the less resourceful should be engraver. A useful option would be speed adjustment. There are sliders (smooth) and position switches.

Case or box. Since there is a lot with the engraver small equipment, to ensure the safety of the entire set helps the case. It is best when inside there is an insert with special niches under every snap. In extreme cases, you can purchase the device in cardboard box, but during transportation exclude damage and breaking the tool and fixtures will be difficult.

The weight of the engraver. An important role when working with the tool is its mass. It is indicated in the assembled condition with a standard battery. The most productive models weigh 0.5-0.7 kg, and compact household products – 0.25-0.40 kg.

Battery capacity and voltage. Duration of work battery engraver depends on battery parameters such as capacity and voltage.

  1. The higher the battery capacity, the longer the device can last. without charging. However, with increasing capacity, the mass usually also increases. batteries, and hence the whole dremel. Professional tool often equipped with two batteries: one can be used in work, the other is charging at this time.
  2. The engraver’s duration also depends on the battery voltage. without recharging. If you compare two batteries with the same capacity, then the working time will be higher for a model with a higher voltage.

Functionality Increase comfort and safety during operation, as well as tool life modern features help.

  1. The system of stabilization of turns provides automatic maintaining a given speed of rotation of the snap, regardless material hardness or tool load.
  2. Protection against overloads allows you to neutralize the negative impact on the motor and gearbox when jamming the tool in the material.
  3. Engine brake saves operator time instantly stopping the rotation of the shaft. Without a brake, an engraver will have to shutdown for a while to keep on weight until a complete stop rotation of the snap.

We selected 8 best battery engravers in our review. To get These models are available in the distribution network of our country. In distribution The editorial staff places were based on the opinion of the expert community, given the feedback from Russian users.

Rating of the best battery engravers

Nomination a place Name of product price
Rating of the best battery engravers 1 Dremel 8220-5 / 65 13 162 rub.
2 BOSCH GRO 12V-35 2.0Ah x2 L-BOXX 10 499 rub.
3 Dremel 8220-1 / 5 6 393 rub.
4 BOSCH GRO 12V-35 0 box 5 610 rub.
5 Dremel 7750-10 3 470 rub.
6 Milwaukee C12 RT-0 5 900 rub.
7 Bort BCT-72Li 1 910 rub.
8 Hammer AMD3.6 1 850 rub.

Dremel 8220-5 / 65

Rating: 4.9

Dremel 8220-5 / 65

A convenient multifunctional tool is Dremel 8220-5 / 65 cordless engraver. Experts worth it appreciated the high shaft speed (30,000 rpm), application quality materials, lack of vibration. To comfortable work with different materials, the manufacturer equipped his product speed regulation and stabilization system. Engraver is offered in different trim levels, the richest is the Platinum series. IN the asset of the model should be a roomy case, two batteries, charger and 65 nozzles. Dremel becomes a winner our review.

Domestic users are flattering about good assembly, rich configuration, wide functionality. Of Cons can only be called a high price.

Advantages

  • multifunctionality;
  • convenience in work;
  • 2 batteries;
  • rich equipment.

disadvantages

  • high price.

BOSCH GRO 12V-35 2.0Ah x2 L-BOXX

Rating: 4.8

BOSCH GRO 12V-35 2.0Ah x2 L-BOXX

The German company BOSCH does not cease to please consumers reliable and productive electrical appliances. Not an exception engraver GRO 12V-35 2.0Ah x2 L-BOXX. Powerful 12 volt battery capacity 2 Ah produces energy that spins the spindle to 35,000 rpm At the same time, experts pay attention to the rich equipment model. The power button can be locked, speed rotation is easily adjustable, the motor is protected from overloads. Thanks The spindle fixing snap changes in seconds. Weigh 0.6 kg product; tool and accessories available case L-BOXX.

Despite more attractive specifications and The price of the engraver is inferior to the winner of the review. Users mark palpable beating of the shaft at high speeds.

Advantages

  • resourcefulness;
  • 2 batteries;
  • rich equipment;
  • convenient L-BOXX.

disadvantages

  • shaft runout at high speed.

Dremel 8220-1 / 5

Rating: 4.7

Dremel 8220-1 / 5

A large list of works capable of performing battery engraver Dremel 8220-1 / 5. The device is powered by a 12-volt battery capacity 2 Ah. Experts liked security models, after releasing the button, the brake instantly stops engine. The RPM switch is installed on the case, it’s convenient use during work. Keyless quick snap change provides cartridge EZ Twist. LED backlight allows comfortable to work even in conditions of poor visibility. To reduce vibration on the handle is a soft rubber pad. She is not Allows the tool to slip during operation.

Russian users appreciate the engraver for power and quality assembly. Of the minuses, they allocate one battery and the lack of case.

Advantages

  • power;
  • high-quality assembly;
  • convenience in work;
  • safety.

disadvantages

  • no case;
  • no spare battery available.

BOSCH GRO 12V-35 0 box

Rating: 4.6

BOSCH GRO 12V-35 0 box

When choosing a direct grinder, you can save a lot if give preference to the model BOSCH GRO 12V-35 0. It is implemented without battery, case and nozzles. The battery will come from another brand instrument, operating voltage should be 12 V. The maximum shaft speed is 35000 rpm, the manufacturer has provided spindle adjustment and button lock inclusion. The engraving function helps increase the durability of the engraver. from overloads. Complete with a tool is a cutting disc, key and box. The device stops a step away from the prize pedestal.

Domestic consumers appreciated the power, the presence of lighting, good equipment. Revealed and some minuses models. This is the appearance of howling and vibration at high speeds and poor equipment.

Advantages

  • power;
  • rich equipment;
  • backlight;
  • affordable price.

disadvantages

  • noise and vibration at high speeds;
  • poor equipment.

Dremel 7750-10

Rating: 4.5

Dremel 7750-10

A good option for a number of operations at home The conditions will be the acquisition of the Dremel 7750-10 engraver. Lightweight (0.42 kg) and the compact device successfully combines an affordable price, good productivity (20000 rpm) and a convenient form. Manufacturer took care of cooling the engine by making on the case vents. Thanks to the innovative EZ tip Twist and locking collets can replace snap without a key. For battery capacity recovery (4.8 V, 1.5 Ah) required just 1 hour. The kit comes with 10 nozzles, a charger and polishing paste.

In reviews, the engraver is praised for quiet work, work to the full low battery, efficient cooling. The disadvantages of users include a positional speed controller and modest power.

Advantages

  • lightness and compactness;
  • ergonomics;
  • affordable price;
  • quiet work.

disadvantages

  • positional speed controller;
  • low power.

Milwaukee C12 RT-0

Rating: 4.4

Milwaukee C12 RT-0

A wide range of tasks in everyday life allows you to solve battery engraver Milwaukee C12 RT-0. The device is suitable for processing metal, wood and plastic blanks. Experts on appreciated compactness, the ability to work in hard to reach places. Spindle speed adjustable in limits 5000-32000 rpm, in the collet chuck can be reliably fix the tool with a shank diameter of 0.8-3.2 mm. The battery is not included, but pick up a 12-volt battery You can from other devices of the brand. Despite the high quality manufacture, the engraver closes the TOP-6 of our review.

Domestic users are unhappy with the price, given the poor a complete set. Can’t boast a model neither modern functions, no case, no snap.

Advantages

  • high power
  • charge indicator;
  • compactness;
  • convenient grip.

disadvantages

  • poor equipment;
  • no modern features.

Bort BCT-72Li

Rating: 4.3

BORT BCT-72LI

The most affordable and lightweight (0.26 kg) engraver in our The review was the model Bort BCT-72Li. Battery machine develops up to 25,000 rpm, when operating at maximum, the battery runs down approximately after 30-40 minutes. A non-removable battery recovers its strength about 3 hours. Experts praised the engraver for quality assembly, reliability and ease of use. Speed ​​mode adjustable position switch after 5000 rpm. With tool Included is a set of nozzles (20 pieces) and a charger. IN Asset “baby” can bring backlight work area.

Domestic users are flattering about lightness, reliability and ease of use. The cons of the engraver is low power, engine overheating at high load.

Advantages

  • lightness and compactness;
  • low price;
  • reliability;
  • high-quality assembly.

disadvantages

  • the motor heats up quickly;
  • low power.

Hammer AMD3.6

Rating: 4.2

Hammer AMD3.6

A great tool for a beginner home master can Become a Hammer AMD3.6 Engraver. Cordless mini drill suitable for cutting, grinding, engraving, drilling and stripping small blanks. The experts were pleasantly surprised by the large number accessories (118 pcs.) that come with the budget tool. The manufacturer did not stint on the functional equipment. The engraver has a power button lock, adjustment rotation speeds, spindle fixing. Develops instrument up to 18000 rpm, powered by a 1.3 Ah battery (3.6 V).

The last line in the review is explained by a small capacity, frequent tripping of motor protection. But for jewelry the tool is the best option.

Advantages

  • multifunctionality;
  • rich equipment;
  • rotation speed adjustment;
  • low price.

disadvantages

  • low power;
  • overheat protection often triggers.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment