Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.
All owners of private homes had to solve the problem. water supply. The most modern option is to use pumps that increase the pressure of water. They crash into the current Highway, replenishing water supplies with minimal human involvement. There are many different models of imported and domestic production. They differ significantly in price, dimensions and technical parameters. To select the optimal unit, should follow the recommendations of our experts.
- Rating of the best pressure boosting pumps
- Rating of the best water pressure boosting pumps
- JILEX Jumbo 60/35 NC
- Wilo PB-201EA
- Grundfos UPA 15-90
- Aquario AC 1512-195A
- The best pumping stations
- Grundfos MQ 3-35
- JILEX Jumbo 70/50 N-50 (stainless steel)
- Marina CAM 80/22
Rating of the best pressure boosting pumps
- Type of equipment. To create the necessary pressure in water supply, you can use one of two options.
- The most budgetary way will be cut into the pipeline surface pump. It can be used not only in private, but also an apartment building. Among the main advantages of this option experts note silent operation and compact dimensions.
- A more modern solution to the problem is the purchase of a pumping room. station. It consists of a surface pump, a hydraulic accumulator, ejector and control system. Such equipment is installed only in country houses, because work is accompanied by serious the noise. Although the issue price is slightly higher than when buying a pump, but but the water supply system will work in automatic mode.
- Power. All pumping units work thanks to electric motors. The higher their power, the higher the performance and longer pump life. However, extra power is also not needed, a pump is more expensive and its power consumption is increasing. The best indicator for home use is in range of 500-1000 watts.
- Water temperature. Since the owners of private houses use pumps in different highways, it is important to know at what maximum water temperature can operate the pump. For tapping into cold water piping will fit any model. But if you have to pump warm water, then you need to look for a pump with operating temperature of about + 60 ° C.
- Performance (bandwidth). Everyone has it The pump has its own capacity indicator. The taller he is the faster the unit pumps fluids per unit time. For organization of water supply in a private house productivity should be within 2-4 cubic meters. m / h
- The maximum pressure. Before going to the store, potential buyer should calculate the amount required pressure. To do this, summarize the horizontal part of the water supply and divided by 10. It is necessary to add to the resulting number vertical part of the highway. For example, for a one-story house with horizontal component of 20 m and a depth of immersion of 3 m is enough head 20/10 + 3 = 5 m.
We selected 7 best pressure boosting pumps to review water. All of them are sold in stores in our country. In distribution places considered the opinions of experts and consumer reviews.
Rating of the best water pressure boosting pumps
The most affordable option is to organize a recharge system water supply is a pump inlet. The Russian market is widely Both foreign and domestic models are presented. The experts selected several reliable models for home use.
|Nomination||a place||Name of product||price|
|Rating of the best water pressure boosting pumps||1||JILEX Jumbo 60/35 NC||7 850 rub.|
|2||Wilo PB-201EA||8 700 rub.|
|3||Grundfos UPA 15-90||5 508 rub.|
|4||Aquario AC 1512-195A||6 653 rub.|
|The best pumping stations||1||Grundfos MQ 3-35||19 880 rub.|
|2||JILEX Jumbo 70/50 N-50 (stainless steel)||13 680 rub.|
|3||Marina CAM 80/22||8 993 rub.|
JILEX Jumbo 60/35 NC
The optimal combination of technical parameters and price has Russian pump JILEX Jumbo 60/35 NK. The model stands out on competitors with high power (600 W), maximum pressure (35 m) and throughput (3.6 cubic m / h). The device is capable of provide water to the private sector. Moreover, the work can be easily organized automatically. The pump is designed to work with cold water (from 1 to 35 ° C), size Filtered particles is 8 mm. The advantages of the device should be attribute the presence of a built-in ejector, protection against overheating and dry move. The model wins in our ranking.
Users are satisfied with the lightness and compactness, performance and automatic operation. The disadvantages should be carry noisy work.
- wide scope of application;
- high performance;
- auto mode;
- noisy work.
German pump Wilo PB-201EA is inferior to the winner of the rating by such characteristics as cost, productivity (3.3 cubic meters. m / h) and maximum head (15 m). At the same time, experts note high quality workmanship. Pump housing made of durable cast iron that is protected against corrosion by cataphoretic coating. The shaft of the unit is made of stainless steel pipes – bronze. The device increases the pressure by 1.3 bar, working exceptionally quietly. The manufacturer provided as manual, and automatic operation.
The owners of the German pump praise her for her quiet work, efficient increase in pressure, economical energy consumption. By cons only horizontal mounting method and high the price.
- two operating modes;
- wide range of operating temperatures (+ 2 … + 60 ° С);
- German quality;
- one way installation.
Grundfos UPA 15-90
Low noise and high build quality Danish pump Grundfos UPA 15-90. In our ranking, he became the most affordable and lightweight (2.7 kg) unit that is best suited for home use. He is inferior to the leaders in the throughput ability (1.5 cubic m / h), maximum pressure (9 m), consuming less than all electricity (120 watts). The pump functions as in manual or automatic mode. The temperature of the pumped water should be in the range + 2 … + 60 ° С. The rotor is always in water, which simultaneously cools and lubricates parts. it promotes vibration absorption.
Domestic users in reviews praise the pump for silent work, easy installation, proper operation of automation. But performance is poor.
- silent work;
- affordable price;
- compact sizes.
- weak increase in water pressure;
- inconvenient inclusion of the manual mode.
Aquario AC 1512-195A
Italian Aquario AC 1512-195A circulation pulser perfectly copes with increasing water pressure in water supply systems. The model is going to Russia, which allowed her to become cost competitive. Regarding technical parameters, the pump provides a throughput of 2.79 cubic meters. m / h, creating a maximum pressure of 12 m. used a “wet” type of rotor, which favorably affected noise level. The device is turned on automatically as soon as the tap opens. It is allowed to pump water with temperature from +2 to + 60 ° С.
Users praise the quiet operation of the pump, clear work in automatic mode. Get on the podium rating models failed due to a slight increase in pressure.
- silent work;
- the flow switch is clearly triggered;
- high-quality assembly;
- affordable price.
- slight increase in pressure.
The best pumping stations
Automate the flow of water into the water system helps pumping stations. Combination of pump, accumulator, ejector and e-government minimizes human involvement. Experts praised the performance of the following stations.
Grundfos MQ 3-35
The best pumping station with automatic control in our The ranking was the Danish model Grundfos MQ 3-35. Unit equipped with a self-priming pump, ejector and accumulator. To control this system installed electronic switch that accurately monitors the water level, controlling the operation of the pump. Experts praised the silent operation pumping station, good performance (3.9 cubic m / h) at low power consumption (850 W). The pump creates maximum head 33.8 m, immersion depth limited to 8 m. The pump starts at a minimum pressure of 2 bar.
Users are satisfied with the compact size, reliability, constant pressure maintenance in the highway. The downside is only high price.
- quiet work;
- high performance;
- full automation;
- high price.
JILEX Jumbo 70/50 N-50 (stainless steel)
High throughput rates (3.9 cubic m / h), maximum head (50 m) and lifting height (9 m) allowed Russian pumping station to take second place in our rating. The model is equipped with an asynchronous electric motor, a centrifugal pump, ejector and accumulator. The pump is switched on when pressure drop below 1.4 bar, the pump switches off when pressure up to 2.8 bar. Experts drew attention to reliable protection against overheating and idling.
The advantages of the station include users manufacturing responsible stainless steel parts, sealed power button, clear instructions. The unit could not get around the winner due to high noise and leakage gaskets between the accumulator and reinforced inlet hose.
- high-quality materials;
- clear instructions;
- high performance;
- powerful engine.
- noisy work;
- leak on gaskets.
Marina CAM 80/22
Italian station Marina (aka Speroni) CAM 80/22 Designed to organize the water supply of country houses. Productivity (3.6 cubic m / h) and power (800 W) are enough to maintain a pressure of 2.8 bar. The pump is able to create maximum head up to 32 m, lifting water from a depth of 8 m. Built-in the hydraulic tank holds 22 liters of water, the automatic level controls the water level. The manufacturer provided for the protection of the motor from overheating and from dry move. Experts liked the stainless steel case and low weight (12 kg). The model ranks third in the ranking.
Users appreciated simplicity and reliability. pumping station. The service life of many owners has exceeded 10 years. Of the shortcomings, high noise levels, long pressure increase with a weak flow of water.
- simplicity and reliability;
- stainless steel case;
- affordable price.
- pressure builds up for a long time;
- noisy work.
Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.