6 best soldering irons for pipes

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Plastic pipes are gradually being squeezed out of industrial buildings and residential buildings metal highways. High strength polypropylene, polyethylene, PVC, PND allow on an equal footing compete with steel and cast iron. In this case, polymeric materials are cheaper, easier to install, do not corrode. Many domestic masters learned how to weld on their own plastic pipes. To do this, purchase a special soldering iron (device for socket welding). With it happens heating the ends of two pipes, after connecting and cooling it turns out reliable and tight joint. With a little training, the process welding takes just seconds, more time for the master you have to spend on cutting and fitting pipes. When will the need to purchase a device, it is worth paying attention to Some important characteristics of the soldering iron.

Criteria for choosing a soldering iron for pipes

  1. One of the main parameters of an electrical appliance becomes heater power. If for household chores will be enough TENA 1000-2000 watts, then professionals need more powerful devices with several heaters.

  2. The device for welding should be selected taking into account the diameter used in the installation of pipes. Soldering irons are usually equipped an additional set of nozzles for different sizes.

  3. The maximum temperature will depend on the type of plastic heating (260-320 ° C). The best option would be to have temperature controllers that can be manual or electronic. This option will help you choose the best welding mode.

  4. As for the additional functionality, then it is very convenient to monitor the heating of the device by light indication. A useful option would be a built-in thermostat, which will maintain the temperature in a predetermined range.

  5. You should also pay attention to the richness of the configuration. it applies primarily to beginner solder. Availability in a set of nozzles, level, pipe cutter, tape measure and keys will not superfluous.

Our review includes the best soldering irons for pipes. Upon selection The following criteria were considered for applicants:

  1. power and performance;

  2. universality;

  3. price;

  4. expert opinion;

  5. consumer reviews.

Rating of the best soldering irons for pipes

Nomination a place Name of product price
The best low-cost soldering irons for beginners 1 CANDAN CM-03 2 200 rub.
2 Wester DWM 1500 3 599 rub.
3 RESANTA ASPT-2000 2 470 rub.
The best professional soldering iron 1 Candan CM05 2400W 6 090 rub.
2 Dytron SP-4a 1200W TraceWeld Profi blue (63-125) 35 490 rub.
3 WRM-160 121 000 rub.

The best low-cost soldering irons for beginners

When building a private house or repairing an apartment, many owners independently mount water pipes. For successful there is no point in buying this expensive professional devices. Experts have selected several effective budget soldering irons.

CANDAN CM-03

Rating: 4.8

CANDAN CM-03

Recognition of domestic masters of plumbing systems soldering iron CANDAN CM-03 has won due to the affordable price, ease of operation and unpretentiousness. The device has enough power to provide a heating temperature of up to 320 ° C. Experts gave this models the first place in the rating for the xiphoid form of the heater, on which can be installed simultaneously two nozzles. Device able to work with a wide range of pipe sizes starting from 16 and ending with 75 mm. There are 4 nozzles in the kit (20, 25, 32 and 40 mm), tape measure and pipe cutter. For the convenience of working in different conditions the manufacturer has equipped the soldering iron with a reliable clamp and a convenient stand.

When it is necessary to make repairs in a house or apartment, providing for the replacement of pipelines, it is worth taking a closer look at welding machine CANDAN CM-03.

Advantages

  • practicality;

  • low price;

  • unpretentiousness;

  • power.

disadvantages

  • short service life.

Wester DWM 1500

Rating: 4.7

Wester DWM 1500

A decent functionality has a soldering iron for pipes Wester DWM 1500. Due to the high power (1500 W) the device connects plastic pipes within 4-6 s. Maximum heating temperature is limited to 300 ° C. Manufacturer good completed the device, providing it with 6 nozzles with a diameter from 20 to 63 mm. Together with the soldering iron, the buyer will receive a screwdriver, tape measure, pipe cutter and gloves. The only negative, according to experts, is a high price, so the model takes the second row rating.

Users note such a plus device, as the presence thermostat. It allows you to set the optimum soldering temperature, which prevents overheating of the plastic. But to the buttons of the device need to get used to.

Advantages

  • fast heating;

  • rich equipment;

  • the presence of a thermostat.

disadvantages

  • high price;

  • unstable stand.

RESANTA ASPT-2000

Rating: 4.6

RESANTA

The highest power among low-cost welding machines possesses the RESANTA ASPT-2000 model. Two kilowatt heater provides fast heating of plastic pipes to the level of 300 ° C. Experts say a successful combination of the price of the device and its technical parameters. The manufacturer saved on the configuration soldering iron. In addition to 6 Teflon-coated nozzles, the kit includes only gloves. Roulette and pipe cutter will have to be bought separately. Therefore, the model deserves only third place in the ranking.

Users are satisfied with the presence of two modes of operation, which allows you to use maximum power or limit it to level of 1 kW. The device is able to work for a long time, connecting quality plastic pipes.

Advantages

  • fast heating;

  • 2 operating modes;

  • excellent soldering quality.

disadvantages

  • modest equipment;

  • high power consumption.

The best professional soldering iron

When you have to connect plastic pipes every day, then long to withstand a serious load only professional apparatuses. They are characterized by high performance, accuracy. setting temperature and durability. Specialists flattering speak about the following models.

Candan CM05 2400W

Rating: 4.9

Candan CM05 2400W

Turkish soldering iron for pipes Candan CM05 is popular professional installers of plumbing systems. The model has optimal price-performance ratio. The experts appreciated the high power of the device (2.4 kW), quick heating to temperature 320 ° С, the possibility of connecting pipes with a diameter of 50 to 160 mm. The device is equipped with two heating elements that can be turned on simultaneously or separately (1.2 kW each). About Achievement the required temperature will be reported to the master by 2 indicator lights. Maintaining the desired temperature (from 50 to 320 ° C) helps thermostat.

Together with the device, the manufacturer encloses a key for nozzles, stand in the form of a tripod and a metal case.

Advantages

  • high power;

  • affordable price;

  • light indicators;

  • good equipment.

disadvantages

  • modest assortment of nozzles.

Dytron SP-4a 1200W TraceWeld Profi blue (63-125)

Rating: 4.8

Dytron SP-4a 1200W TraceWeld Profi blue (63-125)

Excellent quality, durability and uptime Czech soldering iron Dytron SP-4a. In the device for optimal the microprocessor responds to temperature conditions, which allows to achieve accuracy of 1.5 ° C. The professional device is able to cope with a wide pipe size starting from 16 mm and ending with 125 mm. Welding time is determined automatically. Thanks to a set of these characteristics of the model falls into our rating. But the high price is not allowed to become a winner.

In the kit with the device, the manufacturer applies 5 nozzles, a key for attaching nozzles, clamp, metal case. To use a soldering iron is possible not only indoors, but also in street conditions. In addition to polypropylene and polyethylene pipes, the device welds and materials such as PVC and HDPE.

Advantages

  • accuracy of temperature setting;

  • high performance;

  • durability of work.

disadvantages

  • high price;

  • tight case.

WRM-160

Rating: 4.8

WRM-160 soldering iron for pipes

The WRM-160 soldering iron is a real welding machine, which is capable of solving the most complex tasks. Professionals appreciate device for exceptional performance and ease of use. The device is designed to connect pipes with a diameter of 50 to 160 mm. The welding machine does not have a record power (1.2 kW) and high temperature of heating (260 ° C). But experts say Outstanding temperature setting accuracy. It is reached due to the electronic thermostat. The machine is mounted on high legs, which makes the work more convenient and less tiring. Model deserves the third line of our rating.

The unit is intended for large companies, it is hinted at and very high price. Together with the machine, the consumer is offered a wooden boxing, interchangeable nozzles and bushings, 3 legs.

Advantages

  • high performance;

  • convenience in work;

  • accurate temperature setting.

disadvantages

  • large overall dimensions;

  • high price.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply