Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.
Soldering hair dryers are actively used in the repair of microcircuits and boards, to carefully disconnect idle elements and solder new ones. This is a permanent tool for those who repair mobile phones, computers and laptops. The device consists of a controller module and handle with a cooler supplying hot air from heating element through a narrow nozzle, which contributes to fast melting of tin. The principle of operation of the unit hot air, but some are equipped with a second soldering iron for contact soldering. Thanks to a support rack and antistatic the case is safe and convenient to work with. Rating of the best soldering hairdryers based on reviews from the masters and product features, helps to find the best equipment for specific tasks.
How to choose a solder dryer
Before studying the rating, it will be useful to briefly recall the key characteristics of soldering stations to pay attention to when choosing. Keeping this in mind, the benefits and opportunities presented in the ranking of goods. Soldering stations choose taking into account the following parameters:
- Temperature range The ability to set the temperature heating varies from 50 to 500 degrees. Minimum performance important for the gentle handling of very thin and fragile parts. The maximum values are useful for soldering transistors and capacitors with thick legs.
- Power. Hair dryers have a power of 40 to 750 watts, which determines the heating rate of tin. For occasional use minimum indications are suitable, but for professional activities devices from 200 watts are required.
- Type of heating element. It is of three types. The cheapest is nichrome wire in the insulating layer. More advanced – ceramic coating on a conductive rod track. The latter type is induction (heat generation due to electromagnetic coils inside the handle). From the type of heater depends on its service life and safety.
- Airflow outlet. A blow dryer works with a small cooler inside, issuing a flow with a volume of 20-120 l / min. This determines how productive the device will be. A more powerful type is the compressor in the control unit.
- Digital indication. On the control module can be a display is located indicating the current temperature. It makes it easier settings and helps to better navigate in what state is now a hairdryer.
- Auxiliary soldering iron. Comes with some stations and is intended for point exposure by contact with surface. Useful in case of replacement of a single capacitor or diode.
- The shape of the sting. It is conical, square or flat and affects the width of the area that can be heated at a time without permutation hairdryer. Some models are equipped with a whole set nozzles with different shapes and diameters, which expands them application.
- Additional functions. Soldering dryer can be equipped desoldering pump, making the process of large-scale soldering of parts more convenient. The function is needed only with professional use.
Rating of the best soldering hair dryers
|Nomination||a place||Name of product||price|
|Rating of the best soldering hair dryers||1||LUKEY-868||9 520 rub.|
|2||YAXUN YX-968||9 490 rub.|
|3||Quick 857DW +||8 240 rub.|
|4||ELEMENT 878 15298||4 400 rub.|
|5||MEGEON 00361||2 900 rub.|
|6||ELEMENT 858||3 830 rub.|
Having remembered the parameters of the choice of goods, we proceed to the consideration ranking of the best models. Presented equipment alone users praise in reviews for an affordable price, and another, despite for high cost, for wide opportunities.
This model in the ranking belongs to the Chinese brand, which is industry leader in his homeland. The soldering hair dryer has a power of 750 Tue The station is equipped with a main hot air gun with a heating temperature. 100-480 degrees, and an additional contact soldering iron with a thin sting. The product has two independent stands to hot cells did not touch surfaces. The sting Chrome plated and protected against corrosion or deformation when heated. When the device turns off, protection with automatic cooling so that the heater does not overheat.
Experts liked the device for fine settings. thanks to two displays indicating the temperature on each tool, as well as the ability to adjust the strength of the air stream with three values. A place in the rating a desoldering dryer deserved and due to fast heating in 12 s, therefore it is definitely suitable for professional workshop to get started immediately after inclusion.
- light weight of the entire station – 1kg;
- digital indication;
- instant readiness for soldering;
- additional 3 nozzles with different diameters.
- high price;
- no desoldering pump;
- missing handle for quick movement of the housing to another table;
- a hair dryer cannot lower heat below 100º C.
The model that took second place in the rating of soldering hair dryers, owned by Chinese industrial brand. This is one of the most Equipped installations for professional use. Station works with a power of 550 W from a single-phase network 220 V. Equipment made in a compact case with dimensions of 290x350x310 mm and easy fits on the desktop. The casing is completely metal and lasting. The device is equipped with a combined display showing soldering iron and hair dryer temperature.
In our opinion, the product has earned a place in the ranking due to advanced equipment for easy operation. For example, in it there is a scale almost unparalleled by competitors in the right part there is a transparent bulb with a rising ball, helping to visually control the force of the air flow. For a soldering iron is provided with a solder coil, which simplifies operation. Microprocessor-controlled heating helps maintain precision indicators that are noted by the master in the reviews.
- convenient handle for transportation;
- smoke trap to neutralize harmful fumes;
- self-test to protect the hair dryer from burning;
- 4 nozzles included.
- Fahrenheit scale superimposed on the main indicators interferes;
- highest value in the ranking;
- weighs 5.25 kg;
- air capacity 23 l / min below competitors.
Quick 857DW +
The product in the rating refers to the professional type and issues power 580 watts. Its temperature range is 100-450 degrees. The microprocessor monitors heating and the temperature at the outlet of the hair dryer corresponds to indicators on the digital display. Users in reviews like the four nozzles, where 3 and 6 mm Suitable for soldering small elements, and 8 and 12 mm for large ones. To rearrange the device there is a handle on the metal case. The operation is very simple thanks to the two controls (quantity air and degree of heating). Nozzles are not just fixed dressing on a hair dryer, and an additional bolt tie, so do not fall off during expansion and cooling.
Our experts awarded the soldering hair dryer the third place in the rating thanks to the convenient handle which is equipped with the extended spring, protecting the cable from breaking. This will extend its resource with frequent excesses. The device also operates with a diaphragm compressor inside, therefore capable of delivering air at a speed of 100 l / min
- it is completed with four nozzles with diameters from 3 to 12 mm;
- has certificates of ISO 9001, RoHS, CE;
- provides protection against static electricity;
- display with LED indicators.
- nichrome heater;
- loud work 78 dB;
- high price;
- short hot air gun cable 110 cm.
ELEMENT 878 15298
In fourth place is the domestic model manufacturer manufactured in China. Hair dryer station is made in plastic case and has two connectors for connection. On the the control panel has two temperature controllers and air setting. Each action is accompanied by an indication diodes. Range of heating is 100-480 degrees. The unit weighs only 2.7 kg, which simplifies the relocation of the workshop. In set 4 nozzles and two holders for handles are included. Owners in reviews are divided about the availability of the transition to standby mode when setting hairdryer in the parking lot.
Our experts put the model in the rating due to the optimal value for money. This is the cheapest soldering hair dryer of professional category. The device heats up in 7 seconds, has two working tools and a power of 700 watts. Function supported adjusting the blowing speed and heating power. Such an option optimal for the novice repairman of mobile phones and video cameras.
- an exit to working temperature in 7 seconds;
- two soldering tools in one device;
- the lowest cost in the professional category;
- comfortable hair dryer handle with bump relief slip.
- in the minimum position of the regulator, the blower blows very hard;
- no display showing real values;
- the selected temperature on the scale is less than the existing one – knowingly exhibit more;
- plastic case.
The penultimate place in our ranking is another domestic product. The station operates on a single-phase 220 V network and consumes 50 watts. The device supports heating from 200 to 480º C. The device weighs 1.3 kg, so move around with it and even drive out Calling for on-site repairs is not difficult. The kit includes a convenient holder and cleaning sponge so that the sting does not have soot. On the the front panel has a connector for connecting a soldering iron and diodes informing about switching on and reaching the set temperature. The heating controller contains two scales.
This soldering station is rated because it has reasonable price and consumes a minimum of electricity – in 10 hours work will turn out only 0.5 kW. But due to the lack of hot air soldering (supports contact method only) is not suitable for every workshop. It’s worth paying attention to ham radio, designing their own installations.
- stings are suitable from other manufacturers;
- takes up little space on the table;
- suitable for everyday use;
- comfortable thin handle;
- affordable cost.
- only one soldering iron;
- no screen;
- a scale with degrees Fahrenheit interferes.
In last place in the rating is a soldering hair dryer from the Russian simplicity of design and features. There is no display, and instead provides a drawn scale with degrees from 100 to 450. The lower regulator on the front panel responsible for the speed of blowing and has 8 positions, although the adjustment smooth and intermediate values can be set. Masters in reviews pay attention to the bulky handle with a cooler, to which you need to get used to make manipulations on microcircuits. The unit delivers power of 650 W and informs about its work by two burning diodes.
We included a solder dryer in the rating due to the increased starting power thanks to which it is possible to perform work after the first 3 seconds. Although the device implements the old feed technology air fan, but this unit is capable of delivering up to 120 l / min, which provides quick heat distribution. This Russian-Chinese product is another affordable alternative for novice masters, so as not to invest heavily in equipment on first time.
- acceptable power of 650 watts;
- accelerated heating;
- strong air flow;
- neat and comfortable stand for hairdryer.
- wide rear of the handle;
- no additional soldering iron;
- no display;
- with severe bends, the wire connected to the handle of the hair dryer may to break.
Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.