6 best professional rotary hammers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Hammers allow you to drill holes in brick, concrete, asphalt or stone. For regular installation of ventilation systems and conditioning, as well as the destruction of interior partitions, expansion of window and door openings, professional models. Here are 6 of the best punchers of this type that have crazy power and stamina to withstand the likes load every day. The review is based on an analysis of technical characteristics of perforators on the analytical portal rankquality.

Rating of the best professional punchers

The experts of our magazine, when compiling the TOP-6 professional punchers, took into account key characteristics, such as:

  1. Power, W);
  2. impact energy (J);
  3. the number of revolutions and strikes;
  4. ergonomics of the model;
  5. endurance.

We also guided by the opinion of professional builders in reviews, which helped to highlight not only the pros, but also the minuses goods.

Nomination a place Name of product price
Rating of the best professional punchers 1 Milwaukee Kango 950 S 92 820 rub.
2 Metabo KHE 96 49 990 rub.
3 Graphite 58G878 24 665 rub.
4 AEG PN 11 E 52,149 rubles
5 BOSCH GBH 12-52 DV 57 699 rub.
6 CALIBER EP-2000 / 50M 19 280 rub.

Milwaukee Kango 950 S

Rating: 4.9

Milwaukee Kango 950 S

The review was led by a hammer drill from the Milwaukee brand with a capacity of 1700 W and impact force of 27 J. The professional model has a D-shaped handle with rubberized grip on one side. Second pen The D-type rotates on the gearbox on an axis 360º. The manufacturer took care of the third I-shaped handle, which can screw into the gear housing or next to the main thread by turning the rotary hammer into a T-shaped model for drilling into lower position. In the reviews, the owners like that the set has a large tube of lubricant that lasts for a couple of months of active work. Also, the perforator has a coal shutdown system faded graphite brushes elements.

Our experts, after studying the reviews of the masters, concluded that this is the most “indestructible” punch that can withstand any harsh operational conditions. He adequately endures falls from a height 1 m, overheating, temporary operation without lubrication and ambient temperature at -20º C.

Advantages

  • 1950 hits in 60 seconds;
  • metal gear;
  • two operating modes;
  • cartridge rotation up to 250 rpm.

disadvantages

  • hands get tired very much from a weight of 11.8 kg

Metabo KHE 96

Rating: 4.8

Metabo KHE 96

The second place went to a professional-grade puncher from German corporation Metabo. The model is very similar to the above by configuration and is its direct competitor. The Germans endowed punch with a similar power of 1700 W, two modes of operation, frost-resistant wire and the ability to rotate the snap in range 125-250 rpm. This indicator master can adjust independently, depending on the hardness of the material being pierced. But the impact force here is slightly inferior to the competitor and is 20 J against 27.

We rated the professional product as the best due to availability soft start, which helps to get started without a jerk. If a use the tool all day, it significantly reduces load. Judging by the reviews, this model is really capable of Drill a hole with a diameter of 150 mm in concrete with a crown. On such ability is worth paying attention to those who install exhaust ventilation channels, laying them in the walls with a thickness of 400-500 mm.

Advantages

  • rotation of the second handle 360º with the ability to change the angle tilt;
  • wide stop of the second handle;
  • some serve up to 7 years with regular workload;
  • all elements in the gearbox are made of metal.

disadvantages

  • no reverse to retrieve snap-ins.
  • weak anti-vibration system.

Graphite 58G878

Rating: 4.7

Graphite 58G878

In third place unanimously was a puncher from the Polish brand “Graphite”, with a power of 1700 watts and a shock force of 27 J. The professional model comes in a plastic case, simplifying the transportation and storage of the device. Body length models 730 mm and, in order to hold it with optimal weight distribution, two additional handles are provided at the end and in the middle gearbox. The second can be rearranged next to the main handle for shaping a jackhammer. The cartridge pushes the drill with a frequency impact 960-1950 per minute, which makes it easy to destroy stone, brick and cement screed.

Professional concrete breaker stands out due to reduced vibration, which confirm the master in the reviews. The manufacturer managed to implement effective system that dampens vibrations going to the handle. Another price The hammer drill compares favorably with other products of this category in the market.

Advantages

  • cable 3 m;
  • metal gear;
  • one of the most affordable prices;
  • Easy one-touch snap change
  • excellent anti-vibration system.

disadvantages

  • overheats when work is being carried out on reinforced concrete;
  • not the most hardy gearbox (one of the modes disappears if switch frequently).

AEG PN 11 E

Rating: 4.6

AEG PN 11 E

Here is another worthy professional device with vibration protection and impact force 27 J. In addition to the main handle, anti-vibration system there is even a screw-in handle. The hammer drill is assembled in the Czech Republic and endowed with a power of 1700 watts. With your index finger you can reach speed switch, adjusting rotation from 125 to 250 per minute. The shock mechanism pushes in the amount of 975-1950. Weigh model 11.8 kg. The mode switch is moved to the top gearbox and it can be reached with the second hand. Safety clutch will not allow a powerful motor to twist your hands if the drill gets stuck in the wall.

The professional tool is notable for a long network cable 6 m. This simplifies operation and allows in most cases do without carrying. The puncher also has a system quick brush replacement. If the graphite elements suddenly wear off, then the installation of new ones will take 2 minutes, and not 1 hour, as with others, in case of complete disassembly of the housing.

Advantages

  • I-shaped handle equipped with a damper;
  • the cartridge is equipped with a rubber boot;
  • effective heat removal from the gearbox;
  • fuse against unauthorized starting.

disadvantages

  • works with a volume of 111 dB;
  • no auto shut off when overheating.

BOSCH GBH 12-52 DV

Rating: 4.5

BOSCH GBH 12-52 DV

The next model also has an electric motor power of 1700 W, but loses by the force of blow described above – here this indicator is 19 J. But the strike system is much faster than that of competitors – 1750-2150 bpm The rotary hammer is equipped with a 3 m network cable. Untwisting of equipment is possible up to 220 rpm. According to reviews, a professional tool for craftsmen like a steady barrel with motor that allows you to quickly free your hands by placing a hammer on the table or floor. The rubber pad at the bottom of the barrel is not affected Scratches and protects the plastic from damage. Manufacturer declares that the tool can be used with drills diameter up to 80 mm.

The hammer drill attracted the attention of experts with its compactness with 60 cm long. Other professional counterparts have this the parameter is 70-71 cm. Such a hammer drill is useful for work in a limited space.

Advantages

  • can be quickly put on the “barrel”, hands free;
  • additional handle with a wide emphasis;
  • impact frequency 1750-2150 per minute;
  • equipped with a safety clutch.

disadvantages

  • the case is completely plastic;
  • the cartridge does not have a protective boot;
  • it is inconvenient to keep a jackhammer in the operating mode (in the lower position);
  • It gets very hot.

CALIBER EP-2000 / 50M

Rating: 4.4

CALIBER EP-2000 / 50M

The review is completed by a professional tool from the Caliber brand, which works in the mode of chiselling and drilling with impact. Front part of the cartridge is equipped with abundant perforation to ensure efficient air cooling. Keeping your model comfortable thanks rubberized handle with anti-vibration. The start key is locked facilitating fixation during prolonged manipulations. When jammed snap triggered ratchet clutch. In reviews to masters I like that with the punch, the kit comes with a peak and drill, as well as a plastic case. When concrete partitions collapse cross section of 80 mm, the tool passes the material without the slightest resistance.

A professional apparatus stands out with a shock frequency of 2300 bpm. In combination with an electric motor power of 2000 W and an impact force of 25 J, this makes the model one of the highest performing. But the mass in 17.5 kg requires more frequent work stops to give rest hands.

Advantages

  • good equipment;
  • rubberized handle;
  • improved air cooling;
  • anti-vibration system;
  • the second knob rotates 360º and can be adjusted in angle tilt.

disadvantages

  • the punch from the outside is completely made of plastic;
  • weight 17.5 kg;
  • the handle rotates tightly.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment