6 best pneumatic jackhammers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Pneumatic jackhammers differ from other types dismantling tool with less weight and dimensions, because they don’t have an engine inside, but they work on compressed air, coming from the compressor. Thanks to this, the operator’s hands experience less load and equipment is more convenient to use in limited places. Since there is no motor, there is no sparking from graphite brushes for increased safety operation in mines and closed tanks where it can accumulate gas. Here are the best pneumatic hammers that highlighted by our experts based on their characteristics and reviews buyers.

Rating of the best pneumatic jackhammers

Nomination a place Name of product price
the best powerful pneumatic jackhammers 1 Tomsk plant named after Kuznetsov BK-3 41 780 rub.
2 CALIBER OMP-815 4 899 rub.
best light pneumatic jackhammers 1 JONNESWAY JAH-303HK 11 656 rub.
2 SUMAKE ST-M3009K / H 4 246 rub.
3 Metabo DMH 30 SET 4 696 rub.
4 Wester VM-10 3 451 rub.

Rating of the best powerful pneumatic jackhammers

Pneumatic hammers are divided into heavy and light. First, consider the fencing equipment for the most serious tasks. Large weight 9-15 kg better absorbs vibration and promotes confident passage of solid material. If you have to destroy reinforced concrete or brick blocks 30-50 cm thick, choose these hammers.

Tomsk plant named after Kuznetsov BK-3

Rating: 4.9

Tomsk plant named after Kuznetsov BK-3

In the first place in the category of domestic jacking tool BK-3. This is a 1.3 kW professional hammer working from the compressor and spending 1500 l / min. Capsule with brisk Designed for 6 bar pressure. Pneumatic concrete breaker per minute makes 780 shots. Round chuck convenient for quick installation peaks, crowbars or chisels. Find extra snap for this models in Russia will not be a problem. In the reviews, the owners are satisfied hammer, because the device is able to work without interruption few hours. At the same time, its body is not very hot, which extends the resource of key nodes.

This is one of the most powerful pneumatic tools. Fender the hammer has an impact energy of 95 J and is capable of destroying concrete, reinforced concrete, silicate and red refractory bricks. Lever pneumatic hammer is divided into two parts to hold on to with both hands, and this increases the usability and performance.

Advantages

  • simple connection to the compressor;
  • rubber cuff protects the peaks from the penetration dust
  • makes 780 beats per minute;
  • withstands pressure of 6 bar.

disadvantages

  • difficult to transport due to a weight of 13.3 kg;
  • a powerful compressor is needed.

CALIBER OMP-815

Rating: 4.8

CALIBER OMP-815

Second place in the category of the best heavy hammers we gave OMP-815 from Caliber. The number in the index indicates power pneumatic tool 815 watts. Energy of impact of a chipper reaches 43 J. Between the D-shaped handle and shock part the manufacturer has installed a well-thought-out anti-vibration system, therefore, the operator’s hands experience less stress. Jackhammer Designed for installation of accessories with a shank diameter of 24 mm. Weigh pneumatic model 11 kg and consumes 1560 liters of compressed per minute air.

This jackhammer is notable for its adjustment function. revolutions. Depending on the hardness of the material, the number of revolutions can be adjusted to the desired number, which provides less vibration and efficient work. In reviews, owners praise the goods for maintaining the set number of strokes under load. If a You often have to work with dissimilar floors, then buy this jackpot.

Advantages

  • thought-out anti-vibration system;
  • peak included;
  • maintains a given frequency of shock under load;
  • strong, metal case.

disadvantages

  • the handle does not have a dividing partition;
  • it is inconvenient to hold the D-shaped handle with both hands;
  • heavy to transport due to a weight of 11 kg.

The best lightweight pneumatic jackhammers

Such fenders weigh 2-3 kg and can even be held with one hand. They are designed for simpler tasks such as knocking out bricks in the technical channel of a multi-storey building, dismantling curtain walls, dismantling part of the screed or hollowing out cement in a small area for communication.

JONNESWAY JAH-303HK

Rating: 4.9

JONNESWAY JAH-303HK

In the category of pneumatic-type light hammers on first place is JONNESWAY JAH-303HK. It has a gun case, and the fitting from the compressor is connected at the end of the handle. In a minute The pneumatic impactor consumes 283 liters of air. Hammer blows commits with a force of 9.6 J, and their maximum number is 2100 bpm The body length is 225 mm, so it’s convenient for them manipulate in a limited space. To buyers in reviews like a quick change cartridge that simplifies working with various snap-ins. Also here is a convenient start key, facilitating the start of the process.

This jackhammer is notable for its advanced configuration, containing a capacious case and a set of chisels from chromo-molybdenum. They designed not only to destroy concrete and bricks, but even welds, so you can use the tool for dismantling metal structures.

Advantages

  • convenient to manipulate due to the weight of 2 kg;
  • makes 2100 beats per minute;
  • It is delivered in a strong case;
  • threaded hose connection.

disadvantages

  • it is inconvenient to rest with the second hand, and sometimes it is necessary;
  • the handle slides in the hands.

SUMAKE ST-M3009K / H

Rating: 4.8

SUMAKE ST-M3009K / H

SUMAKE ST-M3009K / H pneumatic hammer for crushing concrete and other dense materials generates 3200 beats per minute with strength 7.1 J. A jacking tool works with a snap that has HEX shanks. The hammer is delivered in a plastic case. The chipper handle is covered with rubber, so it does not slip in the hands. The compressor hose is connected from below and does not interfere with working hours. For a minute, the unit consumes 400 liters of air. Buyers in reviews like the product bundle to which chisel, crowbar, peak and chisel included.

Experts consider the pneumatic hammer the best in convenience one-handed work. Its weight is only 1.6 kg, and short the case simplifies manipulations on limited space.

Advantages

  • five chisels included;
  • there is a capacious plastic case;
  • makes up to 3200 beats / min;
  • strong metal case;
  • rubberized handle.

disadvantages

  • strokes are not regulated;
  • gets warm during work.

Metabo DMH 30 SET

Rating: 4.7

Metabo DMH 30 SET

Metabo brand offers a jackhammer working with pneumatic system and generating force of impact of 5 J. This enough to hammer aerated concrete, plaster, ceramic tile or masonry in the brick floor. Manufacturer provides with the pneumatic tool two nipples for connections to different hoses (Euro and ARO / Orion). Also included there are: 4 chisels, a plastic case, a spring for quick fixation and a bottle of oil. The device consumes 280 liters of air per minute and makes 3000 hits. Reviews show that a jackhammer comfortable grip with ergonomic cutouts. Soft linings do not give Slip the jacking tool in your hands and protect against corns. Masters share that there is no backstroke in the palm of your hand.

We found the pneumatic hammer to be the best because of the optimal weight distribution. Unlike other fenders, the hull is not L-shaped and T-shaped, so it’s easier to hold the chipper, even though it weighs 2 kg. If you often have to work for vertical surface, then take a look at this model.

Advantages

  • four chisels included;
  • spring for quick fixation of equipment;
  • two nipples for connection;
  • there is a case for storage.

disadvantages

  • no adjustment of the number of strokes;
  • the cartridge is not protected against dust.

Wester VM-10

Rating: 4.6

Wester VM-10

Completes the review of the best lightweight pneumatic jackhammers Model VM-10 from Wester. The device has a shock force of 5 J, weighs 1.96 kg and is designed for tooling with round shanks. For the pneumatic system has enough air consumption of 80 liters per minute at 6.3 bar pressure to function successfully. Vibration level here it is relatively small and amounts to 2.8 m / s². Included there is a bottle of oil, an allen key and a nipple. In reviews pneumatic unit praised for quality assembly and airtight fittings. Despite the little-known firm, the product turned out good.

This jackhammer stands out as one of the highest indicators of frequency of blows in a minute – 4500. It promotes increase productivity and is suitable for working with dense cement screeds or chipping off wall tiles “planted” to Ceresite, when it’s important to maintain the integrity of the decoration material.

Advantages

  • need a small compressor;
  • easy to pick up equipment;
  • high-quality assembly;
  • vibration does not cause discomfort.

disadvantages

  • 1 year warranty;
  • sold without accessories;
  • loud work with sound of 97 dB.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply