6 best oil seal manufacturers crankshaft

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

To seal the crankshaft and cylinder block are used oil seals. One of them (front) is installed near the pulley, and the other (rear) is hidden behind the gearbox and clutch. Himself the crankshaft oil seal costs a penny, but for the job of replacing it will have to lay out a round sum or spend a lot of time and physical strength. Therefore, you must responsibly approach the choice spare parts when the repair time comes. Recommendations of our experts help bypass pitfalls when buying crankshaft oil seals.

Features, technology, subtleties of repair

Features of the seals. On crankshaft oil seals Val has a negative impact of several factors.

  1. The crankshaft rotates continuously while the engine is running. Between the seals and the shaft, friction occurs, withstand such loads can only wear-resistant material.
  2. There is a lot of engine oil inside the engine, which, when heated, liquefies and strives to leak out. To keep it in the block and the pallet, the oil seal must keep elasticity.
  3. Every day the gland has to deal with differences temperatures. It should be equally elastic in the range temperatures -40 … + 200 ° С. Currently for the manufacture of parts manufacturers use synthetic materials such as NBR (-40 … + 120 ° С), FKM (-20 … + 180 ° С) and PTFE (-130 … + 200 ° С).

Sizes. Tightness of the connection in the engine can provide seals of certain sizes. And if the outer and inner diameter must match the original then width can range from +3 to -2 mm.

Manufacturing technology. Quality seal is different from poor-quality not only material and size, but also manufacturing technology. The most popular are stamping and cutting profile with a cutter. It all depends on the quality of sharpening snap, which affects the parameters of the working edge. More even and the sharper it is, the longer the oil seal will last.

Subtleties of repair. Many unfairly negative reviews arrives at the crankshaft oil seals of different manufacturers. AND leaks may be improper installation or large output on the shaft. No wonder when criticism comes in address of recognized leaders, then in defense of these brands come car masters. First of all, you should pay attention for shaft wear and then perform a proper fit sealing element.

We selected the 6 best manufacturers of crankshaft oil seals for review. All of them sell their products on the Russian market. In distribution The editorial staff took into account the opinion of the expert community and reviews of domestic consumers.

Rating of the best manufacturers of crankshaft oil seals

Nomination a place Manufacturer rating
Rating of the best crankshaft oil seal manufacturers 1 Victor reinz 5.0
2 Glaser 4.9
3 Elring (French) 4.8
4 Goetze 4.7
5 Corteco 4.6
6 Ajusa 4.5

Victor reinz

Rating: 5.0

Victor Reinz

The founding date of Reinz is considered to be 1920, when next to Berlin Hugo Reinz organized the production of hardware products. During the war, all the factories of the company were destroyed, revival The brand came about with the help of the Americans. Since 1993 after a combination of companies Victor and Reinz a new brand has appeared, numbering 23 enterprises in different parts of the planet. Thanks manufacturer develops and implements its own research center new types of spare parts. The assortment includes seals, gaskets, cylinder head bolts and more. Products go to dealerships, and to car factories Ferrari, Fiat, Ford, Renault, VW, Volvo. Brand According to experts, it deserves the first line of our review.

Users have no complaints about the quality of the crankshaft oil seals Victor Reinz. It is only important to buy an original spare part.


  • high quality;
  • exact dimensions;
  • elasticity;
  • durability.


  • not found.


Rating: 4.9


Like Victor Reinz, the Glaser brand belongs to the American Dana company. Spanish company for over 40 years specializes in the production of sealing elements for cars. In the catalog you can find crankshaft oil seals, gaskets, valve stem seals, sealants and a number of other elements. Products has international certificates QS 9001 and ISO 9001, and merit companies in front of Spain were awarded the Prince Philip Prize (for ecology). Supplies of gaskets and gaskets are carried out on such famous car factories like Mercedes-Benz, Opel, Toyota, Nissan, Renault

Users agree with experts that oil seals Glaser brand crankshafts are above average quality. But to buy fake in our country can be very simple. Therefore in our Brand review receives silver.


  • good quality;
  • wear resistance;
  • durability;
  • a wide range of.


  • there are fakes.

Elring (French)

Rating: 4.8


An interesting discussion is being held on motoring forums about oil seals Elring. Experienced craftsmen advise buying products with “Made in France”, avoiding German-made parts. The experts analyzed all cases described by users. The reason is most likely related to manufacturing technology. On the the French factory the working edge is processed on machines, why has a sharper profile. In Germany, stamping has been introduced, which led to an increase in the diameter of the neck. There is a suspicion that in German logistics center come products from Asian branches where further packaging is carried out.

Russian motorists complain that it is not always possible to get the French crankshaft oil seals. Therefore the brand takes third place in our review.


  • high quality;
  • exact dimensions;
  • rich assortment;
  • reliability.


  • Defective oil seals from Germany come across.


Rating: 4.7


Goetze’s worldwide fame attracts fans easy profit. Fakes of crankshaft oil seals, oil scraper caps, gaskets flooded the Russian market. Whole topics on various sites and forums are dedicated to distinguishing the original products from counterfeit. Experts pay tribute to German a manufacturer who makes a lot of efforts to protect his products. In addition to various kinds of holograms, barcodes, stickers, employees of the company conduct explanatory work among consumers. Therefore, a brand with 120 years of history succeeds to maintain a leading position in our country.

Users need to be very careful when buying. oil seals Goetze. It’s enough to save in your smartphone comparative photographs and a detailed description of the original so as not to run into a fake.


  • German quality;
  • protection against fakes;
  • exact dimensions;
  • durability.


  • a lot of fakes.


Rating: 4.6


About 90% of Russian users recommend buying oil seals. Crankshaft Corteco. Many of them consider products of this manufacturer’s best alternative to original parts. The experts explain the quality factor of oil seals using high-quality material. It perfectly withstands temperature changes, internal the edge is perfectly smooth and flexible, and the outer surface differs in durability. Crankshaft oil seals in cardboard are supplied box with company logo. All are very precisely sustained geometric dimensions. The brand also helped to get into the review. affordable price.

As for the flaws, some motorists have discovered in a box instead of a Corteco oil seal manufactured by Nok. It turns out that Corteco also works as a packer.


  • quality material;
  • perfect handling;
  • exact dimensions;
  • wear resistance.


  • packaging may contain parts from other manufacturers.


Rating: 4.5


Among the many positive reviews about Ajusa oil seals on forums meet and negative statements. The experts analyzed all the bad experiences of motorists and came to to the conclusion that the root of evil is counterfeit. Especially often fakes comes from online stores. As for the original parts, then the Spanish brand has no complaints. Quality confirmed by certificates ISO / TS16946, ISO 9001, in stock there are many sealing elements (gaskets, gaskets, caps, sealants) both for foreign cars, and for domestic cars.

The fact that the brand deserves a place in the TOP 6 does not cause doubt. A major manufacturer is well known in the world. Auto components of the brand are delivered to the conveyors of such car factories, like Seat, Nissan and Daewoo.


  • good quality;
  • rich assortment;
  • acceptable prices;
  • exact dimensions.


  • a lot of fake.

Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment