6 best chippers with connection function vacuum cleaner

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Modern building standards imply hidden laying communications in the house or apartment. And an electric wire, and plumbing pipes hide in walls, floors and ceilings. Fast and it’s safe to make grooves with the necessary dimensions chippers. Since a huge amount is formed during operation dust, stone, brick and concrete chips, then without connecting a vacuum cleaner during strobing is indispensable. Therefore most models are equipped with special adapters for connecting the hose. A wide range of products is presented on the domestic market furrowers. They differ in both cost and technical parameters. The recommendations of our experts will help potential buyers to choose the most suitable tool.

Selection recommendations

Destination. Start your search for a chamfer advise on defining clear objectives.

  1. If the tool will work in the hands of electricians, then, perhaps a lightweight and compact device that is capable of not very deep (20-40 mm) and not very wide (10-30 mm) grooves. Let it be inferior in power and dimensions of the furrow, but with it is convenient to work on walls and ceilings.
  2. When laying water and sewer pipes, it will be required unit capable of making wide (up to 50 mm) and deep (up to 65 mm) strobes. In this case, high power comes to the fore models and large diameter saw blades.

Types of chippers. The whole tool can be divided into two groups by the number of installed disks.

  1. Models with one saw blade make only one pass drank it up. This type of chipper is much like a grinder. The advantage of such an instrument is the possibility of education non-standard wide grooves. But the performance of the device will be low.
  2. Double-disc cutters allow you to make two in one pass slot with a given width. Moreover, the groove will turn out perfectly smooth. However, such a tool has a limitation on the minimum and maximum furrow width.

Power. Each chipper manufacturer has different by model power.

  1. A tool with an electric motor with a power of 900-1500 W is suitable for cutting shallow and not wide furrows. Usually with such engines light and compact models are equipped with which it is convenient work on outstretched arms.
  2. To make serious niches in walls or floors, it’s better stop at a powerful shtroborez (1800-2600 watts). But the more powerful If there is an apparatus, the more weight it will have.

Auxiliary systems. Since the chipper is powerful power tool for durability and safety during while it is equipped with a number of important systems.

  1. Contact electronics is responsible for maintaining the selected the operator of the disk rotation speed regardless load.
  2. Overload protection timely response to overheating tool by turning off the motor.
  3. Jamming is a serious problem. snap. Most modern models are equipped with protective couplings.
  4. Soft start limits the inrush current when starting a powerful unit, extending the life of the engine. In addition, the work of the operator becomes safer, because when you turn on there is no jerk tool.

Equipment. When choosing a wall chaser, you should pay attention to the configuration of the model. Important elements specialists think:

  1. distance washers;
  2. Circles
  3. chisels;
  4. hose;
  5. additional handles;
  6. keys;
  7. case.

We selected the 6 best chippers with a connection function in the review vacuum cleaner. All these models are sold in specialized stores. our country. When allocating seats, the editorial staff relied on opinion of the expert community, given the reviews of Russian consumers.

Rating of the best chippers with the function of connecting a vacuum cleaner

Nomination a place Name of product price
Rating of the best chippers with the function of connecting a vacuum cleaner 1 EIBENSTOCK EMF 180 85 627 rub.
2 Makita SG180 RUB 30,849
3 BOSCH GNF 35 CA RUB31,290
4 Metabo MFE 40 Kit 32 655 rub.
5 Interskol PD-230 / 2600E 10 400 rub.
6 CALIBER SHTBE-2600 / 230M 11,469 rubles

EIBENSTOCK EMF 180

Rating: 4.9

EIBENSTOCK EMF 180

Professional channel preparation tool for laying of communications is the EIBENSTOCK EMF 180 chipper. High performance electric motor provides the device (2.3 kW). The device allows you to make the widest grooves (46 mm), maximum cut depth reaches 60 mm. Experts on appreciated the convenience and safety of the device. Manufacturer equipped its product with soft start, overload protection with indicator. Milling width adjustable, efficient system cooling extends the life of the electric motor. Tool wins the gold of our review.

German wall chaser can be seen in the hands of professional builders. They mark high power, performance, convenience in work. The downside is the high price.

Advantages

  • high power and performance;
  • convenience in work;
  • safety;
  • effective cooling.

disadvantages

  • high price.

Makita SG180

Rating: 4.8

Makita SG180

Exceptional stamina has the Japanese Makita chaser SG180. The model is equipped with a powerful electric motor (1800 W), which spins the disk to 4100 rpm. The furrow width is adjustable in the range of 8-43 mm, the device is buried from 15 to 60 mm. Experts liked the electronic speed controller, which maintains rotation speed when changing load. For to increase the life of the device, the manufacturer installed a smooth start. Stability of the device during operation is provided by 2 roller guides. Stroborez takes the second place in our review.

Users call the tool smart and hardy. Some owners he has been working for about 10 years. The disadvantage of the model they consider dimensional casing, it closes the working area at full immersion.

Advantages

  • endurance;
  • performance;
  • electronic speed control;
  • smooth start.

disadvantages

  • overall casing.

BOSCH GNF 35 CA

Rating: 4.8

BOSCH GNF 35 CA

Reliable assistant to the builder when laying communications is a German chipper BOSCH GNF 35 CA. In conjunction with with an industrial vacuum cleaner the tool allows you to work without leaving dust and debris. The model is inferior to the leaders in engine power (1.4 kW), performance is supported by high speed rotation (9300 rpm). Stroborez allowed to use with discs with a diameter of up to 150 mm, which allows you to make grooves in depth up to 35 mm and a width of up to 39 mm. Experts say good functional equipment, electronics maintains constant speed, frequency adjustment is provided. To asset product light weight (4.7 kg) should be recorded.

Russian builders praise the tool for reliability, efficient dust extraction, useful rev control system.

Advantages

  • reliability;
  • good performance;
  • effective dust removal;
  • electronic speed control.

disadvantages

  • modest power.

Metabo MFE 40 Kit

Rating: 4.7

Metabo MFE 40 Kit

Another German chipper is in the TOP-6 of our review. The Metabo MFE 40 model is equipped with a powerful motor (1.9 kW), which spins the disk up to 5000 rpm. Tool can work with disc up to 125 mm in diameter, maximum furrow depth limited to 40 mm with a width of 35 mm. Experts drew attention on the ease of the apparatus (4.6 kg), automatic maintenance of revolutions, smooth start. Long service life ensures cast aluminum case, the motor is reliably protected from dust. To keep a good view of the cutting line, the work of the chipper can carried out by shocks.

In user reviews, many flattering words are addressed to convenience in work, good power, reliability of the device. No special comments only inconvenient to replace disks.

Advantages

  • high power
  • electronic speed control;
  • convenience in work;
  • reliability.

disadvantages

  • it is inconvenient to change disks.

Interskol PD-230 / 2600E

Rating: 4.6

Interskol PD-230 / 2600E

The most attractive value stands out from competitors shtroborez Interskol PD-230 / 2600E. However, the device has a number of other virtues. Experts praised the combination of power (2.6 kW) and revs (6600 rpm). The tool can be equipped a disk with a diameter of 230 mm, which allows you to make deep (up to 65 mm) and wide (up to 41 mm) strobes. All these factors affected the mass. tool (10.7 kg), so work with the device for a long time quite tiring. Of the modern options, it should be noted protection against accidental inclusion, maintaining constant revolutions.

Domestic builders appreciate the device at an affordable price, high power, simple adjustments, smooth start. Not enough owners case, some people complain about the big weight.

Advantages

  • affordable price;
  • high power
  • simple adjustments;
  • easy brush replacement.

disadvantages

  • heavy weight;
  • no case.

CALIBER SHTBE-2600 / 230M

Rating: 4.5

CALIBER SHTBE-2600 / 230M

It is very popular among Russian users. Shtroborez CALIBER ShTBE-2600 / 230M. Experts explain the increased interest in the model with affordable price and high performance. The tool is equipped with a powerful motor (2.6 kW), it rotates the disk at a speed of 4800 rpm. As a cutting tool allowed use discs up to 230 mm in diameter. The model is not inferior to the leaders view in depth (65 mm) and width (40 mm) of the furrow. However in the instrument no function of maintaining constant revolutions, not completed product and storage case.

Users liked the high-power chipper, available price, high-quality discs, an effective dust removal system. TO The minuses of the model are heavy weight (10.5 kg), as well as weak key for replacing disks.

Advantages

  • affordable price;
  • high power
  • high-quality wheels;
  • effective dust removal system.

disadvantages

  • heavy weight;
  • no case.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply