Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.
Varnish – a material used for finishing the body of a car with the purpose of giving a more pronounced color of enamel (matte or glossy) and metal protection against corrosive, chemical, thermal and small mechanical influences.
Today, the market offers more than 100 items. auto lacquers, which creates a problem of choice for each consumer. That is why the editorial staff turned to experienced users and painting masters. Based on their ratings a rating of 6 of the best varnishes suitable for professional overlapping of bodies and individual body elements cars.
- Rating of the best automotive varnishes
- ROBERLO 350 HS 2 + 1 (1.5L) ELITE
- BRULEX 2K-HS
- Baslac 40-40 2K
- PPG D880 HS
- Mobihel Anti-Scratch HS
- KROY 2K CLEARTEX HS SCRATCH RESISTANT
Rating of the best automotive varnishes
|Nomination||a place||Name of product||price|
|Rating of the best car varnishes||1||ROBERLO 350 HS 2 + 1 (1.5L) ELITE||1 700 rub.|
|2||BRULEX 2K-HS||1 390 rub.|
|3||Baslac 40-40 2K||1 360 rub.|
|4||PPG D880 HS||1 208 rub.|
|5||Mobihel Anti-Scratch HS||650 rub|
|6||KROY 2K CLEARTEX HS SCRATCH RESISTANT||941 rub|
ROBERLO 350 HS 2 + 1 (1.5L) ELITE
Product of the Spanish company Roberlo – professional varnish for professional bodywork outside depending on the age and condition of the paint. It can be used as in case of pre-sale preparation of the car (recommended by experts), and when restoring individual elements or the entire body during repair work. Enamel color reproduction the Roberlo 350 HS ELITE is up to par, as are the anti-theft features exposure to various negative factors.
People who use this composition note a high the durability of the layer, even under the condition of grinding and periodic polishing work, which is an important indicator quality varnish. It is also noteworthy that the assortment of Roberlo There are at least 6 additional products that may used to obtain the finished mixture (hardeners, solvents and plasticizers of varying degrees of reaction). Thanks to their combination, you can get unique textured floors that will give the car exclusivity and reliable protect the metal from aging.
- optimal balance of price and quality;
- the ability to choose a mixed component from a wide assortment of products;
- excellent color reproduction and lack of yellowing over time time;
- reliable protection of metal and enamel from negative impact environment;
- It is recommended for finishing work for any purpose.
- not found.
The second place in the rating is rightfully given to high-quality colorless varnish from the German company Brulex, made on based on acrylic resins. Its multicomponent composition is perfect suitable for covering the entire car body, as well as individual body elements. Polymerization times under standard conditions processing time is 24 hours. However, this process can be significantly speed up if you equip the spray booth with a local heating and provide heating of body metal to +60 degrees Celsius: then instead of 24 hours of waiting, the user will receive the car is already in 3-4 hours.
Brulex 2K-HS is recommended as a means for presale car preparation: a combination of overlapping with varnish and subsequent polishing gives the body a “factory” freshness. Satisfactory flow indicators have a positive effect on flow: 1.5 liters ready varnish mixture – varnish + hardener in a ratio of 2: 1 – enough for a high-quality 1-layer midsize floor sedan. This, in turn, leads to small savings on stage of use, even if the initial purchase price is quite high.
- economical consumption due to high quality and adhesion ready mix with metal;
- varnish for professional bodywork;
- creates a resistant coating that protects the body from corrosion;
- long lasting shine effect.
- high purchase price.
Baslac 40-40 2K
The third line of the rating is rightfully given to a professional Baslac 40-40 2K Finishing Coat the main body paint of any freshness. It is recommended to be applied in 2 layer with a total coating thickness of 50 to 70 microns with a small holding and blowing between the first and second treatment. At compliance with these simple conditions, the rated characteristics will be guaranteed: and protection against chemical / mechanical influences, and long-term preservation of appearance properties.
Notably, Baslac 40-40 2K can be dried under infrared radiation. Moreover, manufacturers urge finish the drying process just under the infrared emitter, since in this way the preparation of the coating will take only 8-15 minutes time (instead of 24 hours at a temperature of 20-25 degrees Celsius). TO Unfortunately, innovation comes at a price: cost kit (varnish + hardener) will cost users more than analog from the company Brulex. Therefore, ceteris paribus, this composition remains a little behind.
- the possibility of drying under an infrared emitter (only 8-15 minutes in depending on the length of the emitted waves);
- resistant and reliable layer that protects against a combination of harmful factors;
- does not turn yellow during operation;
- does not require special surface preparation.
- high price.
PPG D880 HS
PPG D880 HS – a product used for body restoration after repair work. It includes acrylic and polyurethane resins providing stability to hardened coatings for various kinds of pollution and chemical influences the environment. In this regard, the probability of yellowing of the varnish layer during operation is minimal, but resistance to processes Polishing and fine grinding, by contrast, are very high.
According to users, PPG D880 HS lends itself well to creation original texture of the coating. Mixing varnish base with various components (composite solutions, hardeners, plasticizers, etc.), you can achieve a decrease or increase glare, gloss, dullness; give the surface of the body a leather texture or fine spraying. If not for strict requirements for pre-painting of painted metal, this product could It would be easy to claim a leading place in the ranking of the best.
- an opportunity to receive the original invoice of a covering;
- resistant to environmental influences – does not turn yellow with the passage of time;
- resistant to the process of fine grinding and polishing.
- quite a large expense for overlapping the body;
- serious requirements for surface cleanliness.
Mobihel Anti-Scratch HS
The main quality worth loving Mobihel Anti-Scratch HS is the best resistance to minor scratches and chips that inevitably arise during the operation of a car. Slovenian Mobihel succeeded in creating a durable and reliable varnish based on acrylic resins, the application of which guarantees protection against small mechanical damage, fading of the paint layer, as well as corrosion body metal. There is one drawback: high price, which makes the product less attractive in the eyes of a wide range users.
As for the application, Mobihel Anti-Scratch HS shows not as attractive as PPG D880 HS – special requirements for bodywork is not presented. But the expense can not please especially sensitive to the budget of people: to ensure high-quality coatings should be applied in 2-3 layers. The very same work on body overlap is fast enough: layered shutter speed it takes only 15 minutes of time, and the final solidification proceeds after 2-3 hours. Thus, users face a difficult the choice between price and quality … and most often the second component, as well as this varnish, inferior to cheapness and more budget competitors.
- excellent resistance of the finished coating to temperature, chemical and mechanical influences;
- quick application and drying process;
- professional staff for a thorough upgrade body paintwork.
- high acquisition cost;
- high consumption for high-quality body overlap.
KROY 2K CLEARTEX HS SCRATCH RESISTANT
The sixth line in the rating of automotive varnish from KROY is due to skepticism of experts regarding its main prescribed functions. The manufacturer declares that the applied composition immune to scratches that arise from mechanical environmental impact, and retains its original appearance in for a long time. In fact, everything turns out to be much more modest: yes, 2K CLEARTEX HS still provides protection, but with sandblasting test lacquer loses gloss before anyone else competitors.
As for ease of application, there are no complaints about no composition. The manufacturer recommends applying it in 2 layers with short exposure (about 15-25 minutes) to provide maximum adhesion first with metal, and after and with freshly applied surface. Complete drying KROY 2K CLEARTEX HS comes with a 24-hour exposure, but there is an opportunity to accelerate this process by increasing the temperature of the medium to +60 degrees Celsius. Then the preparation time is reduced to 30 minutes. Generally, the composition proves itself worthy, but bold and false statements about features coupled with low prevalence in the market are not allow you to claim leadership positions.
- quick drying when heating the spray booth to 60 degrees Celsius (total 30 minutes);
- nice glossy effect;
- Does not turn yellow over time.
- the effect of the application is worse than stated;
- low prevalence in retail.
Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.