Since abrasive products for cleaning microwave from fat cannot be used, one simple method is used – cleansing ferry with the only difference being that various active Components. Our experts selected 5 most effective and this simple ways to help you quickly clean microwave
Method number 1 – magic lemon
Lemon juice or in its absence – citric acid allows easily cope with fatty contaminants and at the same time eliminates all unpleasant odors. By the way, if the microwave is coated inside with enamel, abuse this method is not worth it.
What you need: 0.5 liters of water, 1 tbsp. tablespoon of citric acid or 4 Art. tablespoons of lemon juice + leftover citrus, capacity.
Cleaning process: pour water into a container, then pour there acid or add lemon juice along with its residues. Put in Microwave for 3-5 minutes (set the maximum power). After the end of the “work” of the heated composition do not immediately get it same (wait 10-15 minutes). Then remove the remaining fat from the walls. a rag.
Method number 2 – steam power
Some microwave models have the option of self-cleaning steam. If a you are lucky and you are the owner of one of these devices, you can easily quickly clean the microwave of fat (but only if he is not yet old). If you don’t boast of such a function can, do not be discouraged, try the following method.
What you need: 0.5-1 liters of water, capacity.
Cleaning process: pour water into a plate and place it in a microwave. Turn it on for a few minutes (power on maximum). Under the influence of steam from heated water pollution will quickly give up. It remains only to wipe the walls cameras.
Method number 3 – powerful vinegar
If you forgot the last time you cleaned the microwave fat plaque, it is necessary to use “heavy artillery” in the course: Acetic solution will quickly and effectively cope with old fat. But there is one “but” – in the process of working with the composition should be carefully ventilate the room to avoid acid buildup smell.
What you need: a deep container, 0.5 l of water, 2 tbsp. spoons 9% vinegar.
Cleaning process: first of all, open the window on ventilation so that fresh air can circulate freely, weathering the smell of acid from the room. Mix vinegar with water and send the container to the oven for a couple of minutes, setting the maximum power. After turning off the appliance, hold the composition inside a little so that the vinegar vapors thoroughly dissolve the pollution on the walls of the device. Now just walk on the surface chamber with a sponge and then rinse thoroughly with clean water.
IMPORTANT! If the inside of your microwave enameled, do not abuse the method described above remove grease from the surface of the appliance.
Method number 4 – remove fat with soda
Although abrasives cannot be used to remove grease from the inner surface of the microwave, you can use non-contact method. When heated, baking soda combined with settles with water on the walls of the chamber in the form of condensate, thereby dissolving most pollution.
What you need: capacity, 0.5 l of water, 1 tbsp. food spoon soda.
Cleaning process: pour water into a plate, add soda, mix thoroughly until it is completely dissolved. Put in the microwave, setting the timer for 2-5 minutes (maximum power mode). After turn off the microwave do not rush to get a soda solution: leave it inside for a couple of minutes. Then it remains only to wipe walls with a sponge (if necessary, remaining dirt remove with the same soda composition).
Method number 5 – we solve the problem with a detergent
Remember that abrasives are prohibited, so this is, of course same, liquid dishwashing detergent. This purification option Microwaves for fat are only suitable if the surface not very dirty.
What you need: dishwashing liquid, flat plate, sponge (non-metallic), some water.
Cleaning process: moisten the sponge with plenty of water, apply on it a detergent the size of a 2-ruble coin, carefully foam. Put on a plate and send to the microwave for half a minute (power at a minimum!). watch the appearance of the product (it should not to melt). After turning off the microwave, remove the sponge and with it, wipe all the walls from softened dirt. Then rinse the surface of the chamber with clean water.