4 ways to descale a washing machine a car

Scale in the washing the car appears due to the use of low-quality, rigid and untreated water. Actually, this is exactly what flows in water pipes. Therefore, over time TEN (tubular electric heater) of the washing machine is scaled and it may even burn out eventually.

In addition, limescale adversely affects quality. washing, makes clothes hard and unpleasant to the touch, leading to fading of clothes, remains in the pump pump and clogs it, and also significantly reduces the effectiveness of detergents.

Scale accumulates not only on the heating element, but also in other places. For example, in a powder container, under the cuff of the hatch, in the outlet filter. And all these elements of the “washing machine” need to be cleaned from limescale.

As a result, it’s not worth scaling your favorite “washer” only when her lumps are already on clothes, but also periodically – once every few months. Or use regularly water softeners (like widely publicized, whose name has already occurred to you).

How to descale a washing machine inside

How to descale the washing machine inside

You need to start by cleaning the drum and heating element. To carry out this procedure, in principle, is not very difficult.

You will need:

  1. 400 ml of 9% vinegar. Normal will do. And here is the grape, apple and so on is better not to use;

  2. 50-100 grams of baking soda;

  3. 150 ml of water.

Instruction:

  1. Remove all laundry from the drum. Pour vinegar into it;

  2. Mix water and soda. No need to dissolve. Water is needed to soda having a powder consistency did not fly out of the tank when contact with a stream from a water supply system;

  3. Pour the soda-water mixture into the powder container;

  4. Close the hatch;

  5. Run the longest wash program. It is advisable that it also includes rinsing and heating water.

If you wish, you can repeat step 5 twice to wash the residue soda and vinegar from the tank and the pipes attached to it.

Instead of a water-soda-vinegar mixture, you can use the usual citric acid. It will take 50-300 grams of this substance in depending on the capacity of the washing machine and the amount of lime plaque in it. Citric acid is also poured into a container tray for detergents.

How to descale a washing machine under a cuff

How to descale a washing machine under the cuff

Under the cuff (sealing rubber) of the hatch, not only is formed scale, but various dirt also accumulates. Therefore her also preferably cleaned. But this must be done with caution, as cuff rubber is sensitive to cuts, mechanical damage and harsh chemicals.

You will need:

  1. Sponge with a hard side;

  2. Chlorine-free cleaner. Suitable tool for washing dishes.

  3. Instruction:

  4. Moisten a sponge in water and apply a cleaning agent on it;

  5. Pull the cuff towards you (without fanaticism!);

  6. Wipe open the metal and plastic edges;

  7. Release the cuff, it should calmly return to its place.

After that, it is advisable to rinse the washing machine. For example, running it “idle” to any mode. The upper part of the hatch, where there is no water, you can wipe it moist after cleaning with a napkin.

How to descale a washing machine container

How to descale a washing machine container

In the container (detergent tray) of the washing machine not only scum accumulates, but also non-dissolved household chemistry. It is also advisable to periodically clean it.

You will need:

  1. Instructions for your car;

  2. Sponge with a hard edge;

  3. Any cleaning agent, including a mixture of soda and vinegar.

  4. Instruction:

  5. Find a way to remove the container from the washer. Usually he indicated in the instructions for the device. If she (as usual) lost – look on the Internet for a model of a washing machine. A couple of ways are listed below;

  6. Remove the container;

  7. Wipe the place where it was stored with a sponge. Be careful to Do not damage rubberized nozzles;

  8. Rinse the container itself. You can use cleaning products in including quite aggressive, the main thing – then carefully rinse out. And you can just send it to the dishwasher a car, if any;

  9. Wipe the container and replace it. Simple enough insert it into the tray and slam it.

To remove the container, pull it to the maximum. If your the washing machine is quite new – you will see a blue detail. Click on it and pull it towards you.

If there is no blue detail (this is often “sinned” by household appliances Indesit), then you need to pull the container up and down, and then gently “shake” it by moving left and right.

But it is better, of course, to find instructions for your model.

How to descale the washing machine drain filter

washing machine drain filter

The exhaust filter acts as a “settler” and does not give large contaminants get into the pump pump. In it also scale and dirt accumulate. And therefore it is also desirable clean periodically.

You will need:

  1. Old, unnecessary towel;

  2. Old, unnecessary toothbrush;

  3. Instructions for existing household appliances.

Instruction:

  1. Remove the bottom front cover. If the drain plug the filter is displayed on the front panel, remove it. How to do it – usually indicated in the instructions. In addition, you can do it yourself look – often on the sides of the lower front cover are fixing bolts, after unscrewing of which she herself “falls off”;

  2. Place a towel under the front of the case. If the device working fine, literally a few milliliters will flow out water;

  3. Carefully unscrew the drain filter plug;

  4. With an old toothbrush, remove all dirt from there.

Then you will need to tighten the filter cover as tightly as possible back into place and install the bottom of the front panel.


Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply