22 best brick manufacturers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

One of the most popular materials in the construction industry is a brick. It is used in the construction of walls and partitions, when facing the facade and installing the chimney, with a fence and foundation laying. A wide variety is offered on the market brick, which is different purpose, functional capabilities, sizes, price, etc. But even the same product, produced in different factories may vary significantly. Together with the experts from the team we will deal with the intricacies of choice building bricks.

How to choose a brick

Varieties. Depending on the materials used and Technologies distinguish the following types of bricks.

  1. Ceramic or red brick is considered the ancestor of this type of building materials. As in ancient times, it is made from clay by sintering in furnaces at a temperature of approximately 1000 ° C. This grade optimally suited for foundation, walling and partitions, facades. Material perfectly combines price availability and environmental friendliness.
  2. Silicate went around all the brothers in popularity. It based mainly on low price and precise geometric sizes. The material is made from a mixture of lime and quartz sand and various additives. Scope of application – the device of walls, partitions and fences.
  3. Refractory fireclay brick is used in the installation of chimneys, stoves and fireplaces. Its main feature is resistance to high temperatures (up to 1700 ° C). It is also made from clay, therefore It is an environmentally friendly material.
  4. Clinker stands out for its durability and frost resistance. These he receives properties through the use of refractory clay. This the view is suitable for finishing the facade or paving paths on the backyard plot.
  5. Hyperpressed is the most modern variety. is he made from screenings of marble, shell rock, calcareous rocks or dolomite. After adding the binder, the solution is pressed and fused. This technology allows you to get high strength and very accurate brick geometry. Expensive material most often used for decorative facades or fireplaces.
  6. Facing has perfect geometry and aesthetic appearance view. Its scope is limited to exterior and internal grounds. This group includes all types of bricks, except refractory fireclay.

The size. An important parameter when choosing a brick is its dimensions.

  1. A single brick is considered standard, which has a length of 250 mm, width 120 mm and height 65 mm. It is versatile application.
  2. One and a half (250x120x88 mm) is used in the device massive designs.
  3. To reduce the time for laying allows a double brick (250x120x138 mm).
  4. For decorative purposes, a narrow brick is bought (250x60x65 mm).
  5. Products with a minimum width (250x22x65 mm) are facing tile.

The nature of the filling. Three types are distinguished by filling a brick.

  1. Full-bodied products have neither chambers nor openings. They They are characterized by high strength, but they do not retain heat well and have a lot of weight.
  2. In the hollow there are chambers or holes of various shapes and sizes. Due to voids, the material becomes lighter and cheaper. heat and noise insulation properties are improved. But at the same time fragility appears.
  3. By special technology, porous brick is made. Clay mixes up with wooden sawdust, is molded and fired. Wood burns, forming pores that improve heat insulation quality bricks. The disadvantages include the inconvenience of work and high price.

We selected 22 of the best brick manufacturers to review. Products These company is sold in the domestic market. In drawing up The rating took into account the opinions of experts and consumer reviews.

Rating of the best brick manufacturer

Nomination a place Name of product rating
The best manufacturers of silicate brick 1 Lipetsk Silicate Plant 5.0
2 Yaroslavl plant of silicate brick 4.9
3 Voronezh Plant of Building Materials 4.8
4 Mikhailovsky plant of silicate brick 4.7
5 Cherepovets silicate brick factory 4.6
6 Tver Combine of Building Materials No. 2 4.5
The best manufacturers of red (ceramic) bricks 1 Golitsyn Ceramic Plant 5.0
2 LSR. Wall materials 4.9
3 Novokubansky factory of ceramic wall materials 4.8
4 Slavic brick 4.7
5 Ryazan brick factory 4.6
6 Vladimir brick factory 4.5
The best manufacturers of facing bricks 1 Zheleznogorsk brick factory 5.0
2 Kirovo-Chepetsk brick factory 4.9
3 Kirov brick factory 4.8
The best manufacturers of refractory fireclay bricks 1 Sukholozhsky Refractory Plant 5.0
2 Brick factory “Novomoskovskogneupor” 4.9
3 Borovichi Refractory Plant 4.8
Top Clinker Brick Manufacturers 1 Eco clinker 5.0
The best manufacturers of hyper pressed brick 1 Hyper pressed brick 5.0
2 Rik 4.9
3 BARRUM 4.8

The best manufacturers of silicate brick

Silicate brick has been used in construction for over a hundred years. Its popularity is currently maintained thanks to the affordable price, precise geometric dimensions, mold resistance and fungi, good sound insulation. Experts identified several domestic manufacturers of silicate brick.

Lipetsk Silicate Plant

Rating: 5.0

Lipetsk Silicate Plant

The largest Russian producer of silicate brick is LLC Lipetsk Silicate Plant. Enterprise efficiently works since 1938, since then modernization has been repeatedly carried out production. In 2015, the next update of the machine tool park, in the shops appeared high-performance German equipment. It allows you to produce annually up to 130 million pieces of conditional brick. Experts appreciated these types products like corpulent, hollow, and also colored silicate. The manufacturer becomes the winner of our rating.

Domestic consumers are satisfied with the strength, multifunctionality and reasonable prices. And here is the accuracy Products are volatile and batch dependent.

Advantages

  • modern production;
  • affordable price;
  • wide range;
  • high strength.

disadvantages

  • accuracy varies from batch to batch.

Yaroslavl plant of silicate brick

Rating: 4.9

Yaroslavl factory of silicate brick

Since 1931, the Yaroslavl plant of silicate brick has been operating. it the oldest enterprise in the country produces more than 40 types of construction materials. After modernization, the annual output of silicate brick reached 100 million pieces. The company has its own laboratory that monitors the quality of raw materials and finished products. In 2017, YaSK merged with the IVF plant, which specializes in in the production of gas silicate and reinforced concrete structures. IN As a result, the buyer is offered a wide range of products for construction.

For users, YaESK products leave a pleasant impression. It combines affordability, strength and durability. Only to the accuracy of geometric dimensions there are comments.

Advantages

  • a wide range of building materials;
  • own laboratory;
  • strength;
  • affordable price.

disadvantages

  • inaccurate geometric dimensions.

Voronezh Plant of Building Materials

Rating: 4.8

Voronezh Plant of Building Materials

The age of the Voronezh plant of building materials is already stepped over the mark of 60 years. The company has survived more than one reconstruction, production facilities were updated. The company has free land for further development. Although after the last upgrade, power reached the mark of 144 million pieces of brick per year. All manufactured products have quality certificates. Experts highlighted Introduced volume dyeing technology, due to which there are wide possibilities for decorating and coloring a brick.

Pridonskoy VKSM plant takes an honorable third place for good quality, reasonable prices and decent assortment. But not all the material has right angles, chips are found at the edges.

Advantages

  • high production capacities;
  • tight quality control;
  • bulk painting;
  • reasonable prices.

disadvantages

  • chips are present;
  • uneven corners.

Mikhailovsky plant of silicate brick

Rating: 4.7

Mikhailovsky plant of silicate brick

A wide range of construction products mastered Mikhailovsky silicate brick plant. The company offers domestic consumers full and hollow products, chipped and smooth products, classic white and modern colored bricks. Production capacities allow producing up to 120 million annually. pieces of conditional brick. Experts praised longevity German pigment LANXESS Deutschland GmbH, it does not fade more 25 years. Since its inception (1978), the priority at the enterprise has been product quality. For this, strict control is carried out on all stages of production.

Users are satisfied with the quality of the Mikhailovsky product, its durability and color palette. The disadvantages include high the price.

Advantages

  • rich assortment;
  • pigment durability;
  • tight quality control;
  • strength.

disadvantages

  • high price.

Cherepovets silicate brick factory

Rating: 4.6

Cherepovets plant of silicate brick

Relatively young enterprise against the background of competitors Cherepovets plant of silicate brick. He was introduced to operation in 1972. In the North-West region the enterprise is one of the largest brick manufacturers. Annual volume production is 100 million conventional units. In assortment there is three-hollow and corpulent brick, single and one-and-a-half products, front and ordinary material. In order to expand the lineup in 1998, the plant launched the technology of volume dyeing. Praise the brand received from experts for the production of rustic surface.

Users appreciated the rich assortment, availability painted bricks, reasonable prices. There are complaints about accuracy sizes, which influenced the place in our ranking.

Advantages

  • wide range;
  • modern technologies;
  • brick with rusted surface;
  • reasonable prices.

disadvantages

  • inaccurate sizes.

Tver Combine of Building Materials No. 2

Rating: 4.5

Tver Combine of Building Materials No. 2

In 1951, the Tver Construction Materials Plant was built № 2. The company has repeatedly won social competitions during the years of the Soviet Union. Cardinal update The plant happened in the 90s, when German was purchased equipment. Already in 1996, TKSM received a high quality brick. “Platinum Star” at an exhibition in Switzerland. Manufacturer tries to maintain an optimal ratio of price and quality. Experts have included the company in our rating for a wide range colored brick, which is obtained in a volumetric way.

Users are satisfied not only with the quality and price of silicate brick, but also round-the-clock shipment of products. However a lot complaints received on a large number of cracked and chipped material.

Advantages

  • international recognition;
  • modern equipment;
  • a wide range of;
  • acceptable prices.

disadvantages

  • a lot of marriage.

The best manufacturers of red (ceramic) bricks

Ceramic is considered an environmentally friendly material. brick. It is made of clay, so the product is safe for a person. Red brick holds heat well, it is easy to styling and operation, different variety of shapes and colors. Specialists drew attention to the products of several enterprises.

Golitsyn Ceramic Plant

Rating: 5.0

Golitsyn Ceramic Plant

Golitsynsky ceramic has deep historical roots factory. The company was founded back in 1882, during which time it accumulated a wealth of experience. For the past 30 years, the brand has specialized in on the release of premium products. Annual production accounts for 120 million ceramic bricks. For the richest red brick assortment the company becomes a winner our rating. Take leading positions in Russia to the manufacturer allows advanced imported equipment, high quality, exclusive models.

Users are satisfied with the dimensional accuracy, reliable packaging, minimum number of chips. The disadvantages they include complexity brick acquisitions at the Golitsyn Ceramic Plant.

Advantages

  • a rich experience;
  • modern equipment;
  • high quality bricks;
  • rich assortment.

disadvantages

  • difficulties with buying at the factory.

LSR. Wall materials

Rating: 4.9

LSR. Wall materials

Not inferior to the leader of the rating in assortment wealth ceramic products brand LSR. Wall materials. To consumer ordinary building bricks (hollow and solid) are offered, products for facing, large-format ceramics. The experts noted the company’s innovative approach, it is the only an enterprise in our country, which massively produces clinker. The company’s products are not inferior in quality to their foreign counterparts, winning by value. The total capacity of four plants, entering into association, reaches 450 million conditional bricks.

Consumers have no complaints about the quality of LSR materials. And here the organization of booking and vacation paid products leaves to wish for the best.

Advantages

  • rich assortment;
  • Hi-tech;
  • large volume of production;
  • high quality.

disadvantages

  • poor sales organization in the factories of the association.

Novokubansky factory of ceramic wall materials

Rating: 4.8

Novokubansky factory of ceramic wall materials

Novokubansky boasts its own raw material base factory of ceramic wall materials. Thanks to this control quality begins with the extraction of clay and continues at all stages technological chain. The output is a brick, which Meets all the requirements of international standards. Several more modest compared to the leaders of the rating, the range looks enterprises and annual production volume (70 million units). To the experts liked the automated lines that reduce the impact human factor on product quality.

Russian builders call Novokubansk brick strong middling. It has good strength and frost resistance, acceptable price. But in terms of aesthetics, users have complaints

Advantages

  • own raw material base;
  • strict control at every stage of production;
  • good quality;
  • acceptable prices.

disadvantages

  • modest appearance.

Slavic brick

Rating: 4.7

Slavic brick

Slavyanskiy brick OJSC has its own quarry. In him high-quality clay is extracted, which is supplied to modern factories with 20 years of experience. The association includes two enterprises that are capable of producing up to 140 million units per year conditional brick. According to experts, among the most advanced Ceramic enterprises in Russia and Europe include the plant in Slavyansk-on-Kuban. I took part in its design Hans Lingl company from Germany. The brand falls into our ranking for rich assortment of ceramic products.

Consumers often prefer Slavic brick for Beautiful colors and good quality. There are complaints that over time, the material crumbles, spoiling the appearance of the facade.

Advantages

  • own clay quarry;
  • modern equipment;
  • Hi-tech;
  • rich assortment.

disadvantages

  • there are cases of destruction of the finishing layer.

Ryazan brick factory

Rating: 4.6

Ryazan brick factory

Since 1929 he has been working in the construction market Ryazan brick factory. Its capacity is up to 70 million ceramic bricks in year. Experts have included the brand in our rating for deep modernization enterprises, the introduction of innovative technologies. The plant conquers Russian consumers with a wide range of ceramic bricks (20 varieties). The catalog has single and thick models, hollow and corpulent products, ordinary and facing bricks. The company’s products during the height of the construction season are like hot cakes, which leads to a shortage.

Users note the fast loading and delivery of the order. However there are complaints about the packaging, there are no insulators between the layers, which is why the front part is scratched. The accuracy is also criticized. sizes.

Advantages

  • expeditious loading and delivery;
  • modern equipment;
  • innovative technologies;
  • variety of models.

disadvantages

  • unreliable packaging;
  • inaccurate sizes.

Vladimir brick factory

Rating: 4.6

Due to the huge clay deposits in the region, a decision was made on the construction of the Vladimir brick factory. The first products were released in 1991, and by 2004 the company reached the annual output of 95 million pieces. Today the factory is famous under the brand name MSTERA. Experts drew attention to high quality products, a wide range of colors (56 shades). Support high levels of production allow automatic lines, working in two technological processes.

The brand falls into our rating for a reasonable price, strength and good quality. The disadvantages include non-compliance paid orders (reserved brick sold to others buyers), as well as for getting the marriage into pallets.

Advantages

  • own raw stocks;
  • automatic lines;
  • variety of colors;
  • affordable price.

disadvantages

  • does not fulfill contractual obligations;
  • marriage is possible.

The best manufacturers of facing bricks

In the construction of houses, the demanded material remains facing brick. Due to aesthetic appearance, wide palette of colors, weather resistance and longevity of the product attracts the attention of Russians. Quality The following companies produce products.

Zheleznogorsk brick factory

Rating: 5.0

Zheleznogorsk brick factory

In 1994, the Zheleznogorsk brick factory was built. The company specializes in the production of facing bricks. To consistently receive high quality products, the company acquired modern European lines. Experts note impeccable accuracy, aesthetics and high durability of products. Confirmation of quality are certificates of conformity, as well as many prestigious diplomas. The plant is in the top 100 enterprises of the construction industry. Every year from the factory conveyor about 40 million pieces of ceramic and facing bricks come off. The brand becomes the winner of our rating.

Domestic consumers are flattering about quality, Affordable price and fast delivery. The pluses should also include decent color line and reliable packaging.

Advantages

  • high quality;
  • aesthetic appearance;
  • reliable packaging;
  • fast delivery.

disadvantages

  • not found.

Kirovo-Chepetsk brick factory

Rating: 4.9

Kirov-Chepetsk brick factory

A young and very modern enterprise in the construction industry is the Kirov-Chepetsk brick factory. Company History started in 2007 when the German project was implemented. At the plant can produce over 40 million conventional loads at maximum load bricks per year. The workshops feature the latest European lines, providing high quality products. Thanks to the wide the line of facing bricks the manufacturer has managed enough quickly take a leading position in the region. To product distribution network are delivered under the KS-Ceramik brand.

Domestic builders liked the products of Kirovo-Chepetskiy brick factory for beautiful appearance, quick device masonry, precise geometric dimensions. Of the shortcomings mentioned the appearance of efflorescence.

Advantages

  • wide range;
  • exact geometric dimensions;
  • low thermal conductivity;
  • affordable price.

disadvantages

  • over time, salt appears.

Kirov brick factory

Rating: 4.8

Kirov brick factory

A major player on a regional scale is Kirovsky brickworks. Its production capacity is limited to 100 million pieces per year. Most of the lineup is silicate brick. High aesthetic qualities have colored products, front and decorative brick. Experts pay attention to computerized logistics implemented in the enterprise, modern technological equipment, energy efficient production. The brand takes an honorable third place in our rating.

In the reviews, users note affordability, good quality, strength and durability of products. Assortment only facing products look more modest than leaders.

Advantages

  • large production capacities;
  • computerized logistics;
  • energy efficient production;
  • good quality.

disadvantages

  • modest range of facing bricks.

The best manufacturers of refractory fireclay bricks

In the construction of chimneys and fireplaces can not do without refractory materials. Chamotte brick remains one of the most sought after. In Russia, several factories produce high-quality refractory products.

Sukholozhsky Refractory Plant

Rating: 5.0

Sukholozhsky Refractory Plant

The birthday of the Sukholozhsky Refractory Plant is March 27 1932. The company has accumulated rich experience, which is transmitted from generation to generation. More than once there was a modernization production, which allowed to maintain a leading position in Russian market. Today the company specializes in producing refractory products. In addition to fireclay bricks to the consumer lightweight products, heat insulators, dry refractory products are offered concrete mixes. The number of consumers has already exceeded 2000, moreover, partners are not only domestic but also foreign company.

Experts gave the winner’s laurels to the brand for a wide range and high quality products. Consumers agree with them, noting The right size and affordable price.

Advantages

  • rich range of refractory products;
  • high quality products;
  • exact dimensions;
  • affordable price.

disadvantages

  • not found.

Brick factory “Novomoskovskogneupor”

Rating: 4.9

Brickworks

A worthy competitor to the winner of the rating since the Soviet era Union is a brick factory “Novomoskovsknegupor”. Company designed to provide refractory products for blast furnaces Kuznetsk and Magnitogorsk. The efforts of a friendly team in 1940 managed to exceed the capacity planned by the government (50 thousand tons), releasing 70 thousand tons of refractory material per year. Today stock society “Novomoskovskogneupor” maintains a leading position in fireclay brick market. Experts attribute this fact to the introduction of innovative technologies, expansion of the assortment, as well as high quality level.

As for the shortcomings, buyers pay attention to low production culture, especially in the loading area platforms.

Advantages

  • innovative technologies;
  • wide experience;
  • rich assortment;
  • acceptable prices.

disadvantages

  • dirt on the territory.

Borovichi Refractory Plant

Rating: 4.8

Borovichi Refractory Plant

In 2019, the Borovichi Refractory Plant celebrates its 162th anniversary. The oldest enterprise boasts not only rich history, but highly qualified staff and modern scientific and technical base. Experts hit the consumer list companies, which include such large enterprises as Magnitogorsk Iron and Steel Works, Rusal, MMC Norilsk Nickel, PAO Severstal. Striking and assortment refractories, consumers are offered more than 43 items.

Domestic users note good product quality, wide range of refractories, reasonable prices. But for the unworthy working conditions of workers the plant takes only third place in our rating.

Advantages

  • glorious traditions;
  • a large number of partners;
  • a wide range of;
  • acceptable prices.

disadvantages

  • poor working conditions for workers.

Top Clinker Brick Manufacturers

Clinker brick has a lot of advantages. He is different durability, high strength, low moisture absorption, resistance to low and high temperatures, wide scope application. But the high price repels potential buyers. Experts identified clinker brick of one enterprise.

Eco clinker

Rating: 5.0

Eco Clinker

Not so long ago (2014), the Ecoclinker plant was built in Novocheboksarsk. Experts drew attention to a young enterprise thanks to the import substitution program. Russian manufacturer launched the production of high-quality clinker brick, which until then It was delivered from abroad. To the benefits of company products Eco-clinker should include an affordable price, as well as large stocks refractory clay in the region. The company is constantly expanding range of clinker, which allows you to occupy a leading position in country. The catalog has sidewalk and front clinker bricks, steps and tiles. The brand becomes the winner of our rating.

Customers prefer Ecoclinker products for reasonable prices, frost resistance, environmental friendliness and high strength.

Advantages

  • high quality;
  • affordable price;
  • own raw material base;
  • rich assortment.

disadvantages

  • not found.

The best manufacturers of hyper pressed brick

Innovative technologies are used in the manufacture hyper pressed brick. The material is accurate in size. high strength, perfectly smooth surface, resistance to weathering. Professionals liked the products following manufacturers.

Hyper pressed brick

Rating: 5.0

Hyperpressed brick

The first manufacturer in Russia of a unique building material became Hyperpressed brick enterprise located in the city of Lukhovtsy. Adopting the latest achievements in the field brick production, the company managed to get products from increased strength. Experts drew attention to the exceptional dimensional accuracy and smooth glossy surface. Win in our The company’s ranking was achieved through the prompt execution of orders a wide range of hyper pressed brick and affordable the price.

Domestic builders have no special claims to quality product and geometric precision. Is that increased strength gives builders some inconvenience during styling.

Advantages

  • modern production;
  • increased strength;
  • exact dimensions;
  • smooth surface.

disadvantages

  • not found.

Rik

Rating: 4.9

RiK

The production of modern hyper-pressed brick has mastered RiK enterprise. It is located in Voskresensk. Manufacturer offers two types of products: with rounded and sharp corners. The color palette is represented by 7 colors, the range is expanded by stepwise gradation of saturation. Experts appreciated perfect dimensional accuracy, smoothness on all sides, strength and frost resistance of products. The brand takes an honorable second place in our rating.

Russian consumers have already had to deal with hyperpressed brick RiK. Reviews are exclusively positive nature, products perfectly combine reasonable price and good quality. The disadvantages include a low-informative site, where users find it difficult to find information about products.

Advantages

  • wide range of colors;
  • exact dimensions;
  • high strength;
  • acceptable prices.

disadvantages

  • uninformative site.

BARRUM

Rating: 4.8

BARRUM

One of the first manufacturers of hyper pressed brick in Russia is considered the Voronezh brick factory “Barrum”. Today the enterprise has reached industrial production volumes, stably supplying durable products to the construction market. Range high-strength brick has 6 textures and 10 color options. The consumer can choose both full-bodied and shaped or hollow. Experts have included the brand in our rating for accurate geometric dimensions, resistance to low temperatures and exceptional durability.

Consumers praise Barrum products for aesthetics and value for money prices. Bribes and delivery of building materials by transport manufacturer. A common problem is cracking. brick after drying the solution.

Advantages

  • a wide range of;
  • reasonable prices;
  • exact dimensions;
  • aesthetic appearance.

disadvantages

  • cracks appear after the solution dries.

Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment