Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.
The kitchen faucet delivers cold, hot or mixed by water temperature. Unlike a similar device in the bathroom, a faucet in the kitchen is used much more often for day, so it must be durable and hardy. How to choose such a product and which manufacturers should pay attention, our experts sorted out.
- How to choose the right faucet for the kitchen
- Rating of the best manufacturers of kitchen faucets
- The best low-cost kitchen faucet manufacturers
- The best manufacturers of kitchen faucets in terms of ratio price quality
- Jacob delafon
- Top manufacturers of premium kitchen faucets segment
How to choose the right faucet for the kitchen
To understand which kitchen faucet will be better, remember a few key factors to pay attention to when choosing:
- The way to open water. It happens classic (in the form of two swivel “lamb”), lever (pushing on / from yourself or left / right) or contactless (on touch sensors from offerings of hands or dishes). The easier it is to start the water, the easier it is to use the appliance during cooking when you need to wash your hands, table accessories regularly, or products.
- The geometry and height of the spout. Kitchen faucet design can be semicircular, U-shaped, L-shaped, etc. It is important that from the edge of the sink there was enough space to install a pan, bowl slow cookers or other large dishes, otherwise they will be washed beat on the side. Spout height makes it easy to draw water into plastic bottle or pan. High are considered models for kitchens with an indicator of 25-40 cm (from the installation site to the edge of the hole, where the water flows from). Medium have 12-15 cm. The smallest protrude 5-7 cm. The last option is suitable only for deep sinks, otherwise under it you can only wash your hands.
- Rotation function. The ability to turn the gander to the left or right convenient for washing and rinsing dishes in the combined double wash. This also allows you to move the crane to the side when working with chicken carcass so as not to beat it against the spout.
- The presence of a prefilter. All kitchen faucets have built-in mesh at the end of the gander, preventing the exit of solid deposits (salt, alkali) out. Due to this mineral inclusions do not enter the water used for cooking. She also shares the flow, softening the water and reducing spray. But in models with a prefilter additional mesh protects itself mixer against clogging with minerals.
- Retractable watering can. The presence of a retractable shower is convenient for wash dishes or products in a deep sink and save time when a large amount of vegetables.
- Channel for filtered water. Allows you to connect supply of purified drinking water to a single tap, so as not to mount additional nozzle from the filter.
- Material. Mixers are made of coated steel chrome, copper, bronze, stainless steel, plastic. The first type is the most Affordable, but chrome plated sometimes. Second and the third – they look interesting, but require regular cleaning, as they fade. Stainless steel does not cling and does not fade, but polishing over time is covered with small scratches.
- The design of the mixer is chosen according to personal preferences and common kitchen interior. There are classic options, hi-tech, country, provence and scandinavian.
Rating of the best manufacturers of kitchen faucets
|The best low-cost kitchen faucet manufacturers||1||IDDIS||5.0|
|The best manufacturers of kitchen faucets in terms of ratio price quality||1||WASSERKRAFT||5.0|
|Top manufacturers of premium kitchen faucets segment||1||CEZARES||5.0|
The best low-cost kitchen faucet manufacturers
First, consider the category of manufacturers whose goods are in a relatively inexpensive price segment. This is the best option. for the first repair in the kitchen or when funds are limited, and the tap suddenly broke.
In the first place among manufacturers with inexpensive products The company is located IDDIS. The brand has been registered by a trading group. SKL LLC in 2004. The development department is located in St. Petersburg and is constantly working on the invention of new models for the kitchen. The company uses high quality brass and copper. and has international certificates, as well as compliance with GOST. IN customer reviews like what is given on the official website recommended retail price for each product at which you can to understand whether the seller inflates the cost in the store.
This manufacturer is in the list of the best because of the constant expanding your collection. Every year the company presents up to 10 new products for the kitchen, so you can always choose something fashionable here and modern, not content with standard options. For example, a manufacturer recently introduced a new mixer from Brass Slide, coated with black powder paint. In him a ceramic cartridge is used for valves.
- there are models with a channel for filtered water;
- mixers with a high spout of 370 mm;
- use brass and stainless steel;
- all products are manufactured in accordance with GOST 17711-93.
- sometimes there is a marriage in the form of narrowed openings for passage liquids (filled with metal);
- at times they can hum a lot during work.
Second place for the German manufacturer Kaiser. Affordable price kitchen faucets due to product manufacturing in China, which allowed the company to reduce costs. But the brand itself registered in Berlin. Trademark owned Olan-Haushaltsgerate. The manufacturer is engaged in the production of household appliances and plumbing for more than 20 years. The catalog of the company contains faucets of the combined type made of steel with chromium plating and non-ferrous metals. Most often, the company development focuses on the lever type of opening, which simplifies use in the kitchen. Customers praise faucets for being quality packaged in foam, so order goods for the kitchen you can safely in online stores – when transporting it is not will get damaged.
In our opinion, the manufacturer is the best, since it produces mixers with a rare coating “white marble”. It’s brass powder coated design in dazzling white. This design is suitable for a bright kitchen. It’s even smaller It is covered with scratches and does not fit.
- interesting diverse design;
- the kit always includes an installation diagram;
- there are mixers with a channel for filtered water;
- a thoughtful aerator does not spray the pressure.
- sometimes difficult to connect;
- short hoses included;
- after 4 years of operation, rubber may not hold well plug on the valve.
We gave the third place to the manufacturer Vidima. This is Bulgarian German mixer company equipment. The company produces sanitary ware for the kitchen with 1962 year. The company entered the Russian market at the end of the twentieth century and Her faucets are now available in over 2,000 stores. Basically the manufacturer focuses on the use of brass, which then chrome plated. In the catalog of products for the kitchen most models with lever valve and a short spout of 10-15 cm. “running” are: “Uno Wa235AA”, Logik BA276AA, “Paktik Ва231АА “. User reviews give a positive opinion about ceramic shutoff valves. It does not require frequent changes seals and they do not let drops pass.
This manufacturer values his reputation the most, therefore, mixers are highly reliable. Although on them 5-year “classic” warranty applies; in terms of quality, they exceed 4 European standard for reliability times.
- cast in brass;
- functional geometry of the case;
- long-term operation with both soft and hard water
- ceramic stop valves.
- when applying a strong pressure they make noise;
- tight inclusion.
Next, a manufacturer registered in Russia, but the leading its industrial activity in China. Firm produces: sinks for the kitchen and bathroom, faucets, shower heads, mirrors, hoses and related accessories. On the official site the products are divided by the throughput diameter and the number of flywheels, which simplifies the selection and helps to quickly find the desired product for the kitchen. Most often, the manufacturer sells lever mixers type of opening. For manufacturing, the company uses high-grade brass. quality chrome plated. But in the assortment there are models with powder spraying. The entire production cycle is carried out by international standards, as evidenced by the presence of certificates.
Experts have added a budget manufacturer to the category of the best, since he has the faucets with the most unexpected colors, helping to choose the shade in the exact combination with furniture and household appliances in the kitchen. For example, the L4898 model is sold in 9 colors, including yellow, purple, red, blue, and green.
- comply with international certificates ISO9008 and CE $
- the product is conveniently divided into categories;
- There is a classic and retro style;
- use brass.
- most mixers with a low spout of 5-7 cm;
- Warranty is provided for 3 months.
And here is another exclusively Chinese manufacturer of mixers, characterized by factory quality. The company manufactures cranes for kitchens using Italian technology for casting copper alloy IMR. it provides mold accuracy and bandwidth. Catalog manufacturer contains wall mounted taps options, single-lever and two-valve models, under the filter. The surface is possible both matte and glossy. Users in reviews like the ease of operation of the elbow faucets, which it is easy to open and close without siphoning off the tap. This is especially comes in handy in the kitchen of a cafe or restaurant, where a lot of processes.
From budget manufacturers this company is the best in implementation innovative developments. Among her kitchen products are faucets with touch response principle, responsive to hand offerings or utensils. Some models also have timers. automatic shutdowns allowing to accumulate the exact volume of liquid without control by the user. If you need high tech mixer at a relatively low price then look for goods for the kitchen is required here.
- two variants of mixers: standard and luxury;
- Italian casting technology is applied;
- there are valve, lever and touch types of opening;
- high anticorrosive properties.
- inside the shell there are shells (craters);
- the chrome surface is very dirty from drops;
- the walls of the housing may be of uneven cross-section.
The best manufacturers of kitchen faucets in terms of ratio price quality
If you don’t want to buy very cheap products, we offer consider the best manufacturers whose kitchen products are different optimal combination of price and quality.
In the first place is the German company WASSERKRAFT, whose philosophy is a “feeling of comfort for the user,” so all of it mixers are aimed at functionality and convenience. His The manufacturer began its activity in 2004 and now refers to a reliable product category with positive reviews. In them buyers report that the faucets are durable, do not leak, and the coating It is resistant to scratches and chips. The company offers both classic options for the kitchen, as well as retro, as well as high-tech. there is double-channel taps for the supply of filtered water. On any The manufacturer gives a guarantee of 5 years.
This company has been added to the list of the best because of the largest assortment of products for the kitchen. Her catalog has 30 lines faucets, where the user can choose a model by design, shape, size, color and materials. For example, the Berkel collection for The kitchen stands out in strict forms with right angles. Lippe Series on the contrary has graceful bends and smooth geometric constructions.
- made directly in Germany;
- glossy coating does not fit;
- soft pressing of the lever;
- 5 year warranty.
- high price;
- sometimes there is not enough eyeliner length of 38 cm and you have to buy another one.
HANSGROHE, founded in 1901, continues our review. It is the oldest German sanitary ware manufacturer specializing in on faucets, shower systems, sinks for the kitchen and bathroom. The headquarters of the company is located in Schiltach. Brand mixers so popular that they are sold not only throughout Europe, but even shipped to the USA. For more than 100 years of history, the company is actively experimented with the shape and functions of the mixers, which led to registration of about 2500 patents. This is one of the first manufacturers who used an aerator to mix the flow with air and reduce splashes, as well as reduce water consumption. In 2011, the company the first introduced a kitchen faucet, the inclusion of which carried out by pressing the button.
The company entered the category of the best due to ergonomics of design mixers. There are many models with exhaust shower in the catalog. For example, the Metris M71 series is presented with a single lever design. The detachable spout has a vertical T-shaped structure. To take it, you do not need to turn your hand and turn it over the tap. Such Ergonomics speeds up washing fruits and vegetables in the restaurant’s kitchen.
- some models have additional shut-off valves;
- chrome surface with which it is easy to remove plaque;
- silicone inserts on aerators;
- Built-in Air Power technology for flow softening.
- high price;
- Unfortunately, there is corrosion.
The third position belongs to the French manufacturer Jacob Delafon, started their activities in the production of kitchen and bathroom rooms in 1889. Initially, the production of the company was focused on the manufacture of mixers, so this The company has the richest experience in their development. Only later the manufacturer’s catalog has expanded with other fixtures for the kitchen. In each mixer of the company an elite combination is traced. French style and latest technological solutions. One of exclusive novelties is the “bottle” geometry, which It looks elegant and sophisticated. Customers are satisfied in the reviews the possibility of choosing a pressure reduction of 12, 30 or 50%, which determined by additional inserts selected at purchase mixer.
We are recognized as the best company due to active use. cartridges eliminating mineral inclusions from water. Such products for the kitchen are indicated by the presence of the “ECO” mode. 90% faucets of this brand are equipped with such a function.
- all products are made directly in France;
- there are sets to reduce pressure;
- mitigation of aeration flow with a supply of up to 2 liters of air per a minute;
- reliable casting of the correct form.
- the diameter of the thread of the French hose is 3/8, and most in houses ½ inch;
- drops can flow down the spout to the base and form there calcareous coating.
And here again the German manufacturer, but already from Dusseldorf. The company was founded in 1936 and now has official Representative offices in 15 countries. The company is engaged in manufacturing plumbing fixtures for the kitchen, bathroom and toilets. On the world mixers market is 8% GROHE. The release of goods is carried out at 4 factories in Germany, as well as at manufacturing sites in Thailand and Portugal. 82% of all goods are exported. Judging by customer reviews, regardless mixer country, quality remains high everywhere. Plumbing owners praise her for the durability of chrome plated glossy finish, but advised to immediately wipe the drops.
Our experts consider GROHE faucets to be the most reliable, despite for everyday active use in the kitchen. We recommend look at the products of the owners of restaurants, cafes and other catering establishments. These are the highest quality mixers for commercial use.
- many high spout mixers;
- ease of opening the tap;
- high reliability of fittings;
- ease of maintenance.
- are expensive;
- stains remain on the gloss.
Czech manufacturer specializes in the production of mixers for bathrooms and kitchens. All products of the company are made from brass and chrome plated. Mixing cold and hot flow is carried out by a ceramic cartridge. In the catalog faucets with classic “lamb”, lever and touch control. Everywhere uses ½ thread diameter inches. Owners of faucets in reviews report that brilliant the coating retains an attractive appearance and is not clouded, but rubber bands on the rotary part may become coarse and leak.
We considered the company to be the best due to the presence of mixers with the ability to supply filtered water, in which two channels removed from each other at a distance of 15 cm. This is implemented in the series LM307 and is intended for kitchen sinks. Purified liquid enters the nozzle through the silicone upper hose, with two rigid attachment points. Tap water is supplied through the lower pipe. This prevents the heating of drinking water from the hot channel.
- strict quality control;
- more affordable price than other products;
- there are models for the kitchen with a channel for filtered water and additional valve;
- convenient retractable spout.
- may leak at the point of attachment of the pressed tube to a hose;
- In the service center, wait a long time for the receipt of spare parts.
German manufacturer Paulmark is famous European brand, but its factories are located in China. Despite this production is carried out under the close supervision of the Germans and undergoes a comprehensive review. Most of all, the company focuses on production of mixers in granite color with different shades. Launch water is carried out by lever method. Company even has creative design solutions where the mixer body is covered in black paint, and the flow switch is chrome plated. Buyers in reviews note a smooth ride and minimal play of leverage.
In our opinion, the company is the best for domestic consumers, as the colors of its products are focused specifically on kitchen sinks sold in Russia. The manufacturer has specifically designed a series of faucets for kitchen brands Aquagranirex, Granfest, Gran Store, Ulgran. The company produces about 50 models of mixers, that will help to design the kitchen as stylistic as possible unity.
- comprehensive quality control of each product;
- beautiful shades of granite;
- soft switching of cold and hot flow;
- many models with an additional channel.
- issued directly in China;
- At first, a slight smell of paint is felt from him.
The company was founded in 1932 in Denmark. From the very beginning the manufacturer has been manufacturing bathroom taps, kitchens, shower sets and accessories. Company uses for casting only brass that can be coated with powder dusting or chrome. There is a separate series of bronze mixers with retro design. The company gives a 5 year warranty on valves. The manufacturer was one of the first to use hydro-ceramic a switch that has a longer service life. Review users like Cool Tech anti-burn coating, thanks to which the outer surface of the hot water tap stays cold.
Experts considered the company the best for the creative look of the mixers. This is felt in every model, because the company’s slogan is “design is everything.” For example, in the mixer of the Venus series spout semicircular shape, complemented by a central pillar, from which comes two “shoots” at 45 degrees. They are mounted L-shaped faceted levers. It looks unusual and immediately draws attention to yourself. And such a variety of options from the manufacturer lot.
- abrasion resistant coating;
- quality brass;
- reliable shutoff valves with ceramic crane boxes;
- the ability to rotate 120 degrees.
- the thread is not always suitable for connection – needed adapters;
- gradually appears in the leverage.
Top manufacturers of premium kitchen faucets segment
For fans of the highest quality products, experts prepared a list of companies of the best manufacturers of mixers, characterized by long service life of shutoff valves and decorative coverings.
An elite manufacturer of sanitary products from Italy. Firm has headquarters in the vicinity of Modena. For design development The best experts of Europe are involved. On chrome taps The coated company gives a 5 year warranty. If something breaks, then claims are reviewed within 10 days and the manufacturer either repairs the product, or returns the full price for it.
The manufacturer is recognized by us as the best in wealth of design mixers. For example, the Atlantis series has a high spout in retro style that can be in gold, bronze or silver performance. Instead of traditional “lamb” the company uses faceted balls made of crystal or marble. Last can be in several colors. It helps to arrange the kitchen sink in a special, impressive and elaborate. In reviews, buyers satisfied with the presence of show rooms where you can see expensive goods yet Before buying, touch everything in person and make sure of the quality. But the popularity of the brand has led to a lot of fakes in beautiful packaging, so you need to carefully check certificate and other product features.
- there are nozzles with a rotation of 360 degrees;
- the support service will respond in writing within 10 days;
- brass castings with regular shapes and no burrs;
- often use Swarovski stones for decoration.
- a lot of fakes;
- a guarantee on a covering from “gold” – 6 months;
- high price.
The company was founded by Heinrich Blanco in 1925 in Germany. Of family business grew Europe’s largest producer sanitary ware with ceramic and stainless sinks, as well as a variety of faucets for sinks and bathtubs. For the kitchen company offers several crane series: Wega with low stand and high 45 degree straight spout, Bravon-S slightly curved “gander” and detachable watering can, Carena and Mida-S, differing high spouts of arched form. Buyers in reviews like rare Jasmine finish used in the faucet series Actis, which allows you to decorate an unusual sink.
Experts considered the company the best because of the presence of mixers with special large retractable watering can. This design decision is reflected in Wega-S series. The increased diameter of the shower allows you to wash vegetables faster in a deep sink in the kitchen. The manufacturer’s products should be pay attention to the owners of expensive restaurants. It’s not only accelerate the execution of processes in the kitchen, but also facilitate the care of surfaces that contribute to cleanliness.
- the ability to rotate the nose 140 degrees;
- 1 class of noise during water intake;
- 5 year warranty;
- always stabilizing plate included structural stability.
- high price;
- some do not like the very easy travel of the lever.
Further, a manufacturer from Germany under the name KLUDI. Firm engaged in the manufacture of sanitary products since 1926 Despite the growth in consumer demand, the company’s factories continue to operate only in Germany, Hungary and Austria. In France, Romania, Czech Republic, Bulgaria, Poland and Slovakia are available official distributors. For several years, trading Representative offices in Russia, Ukraine, Vietnam, the Philippines and Dubai. Sellers in reviews like that the company constantly conducts research in their industry and offers new design ideas and faucets finishes.
The company is ranked as the best because of well-thought-out technical decisions. For example, in the catalog of the manufacturer there are kitchen faucets DN8, which has a third valve for supplying pressure to a dishwasher. This saves space in the kitchen and does not requires a separate crane to be installed.
- design and production directly in Europe;
- 360 degree rotation of the spout;
- inside copper tubes;
- aerators with 24 through holes.
- high price;
- chrome is scratched.
Another premium plumbing manufacturer quality. The company is located in Italy, but has several factories in other countries of Europe. 50 years of mixer manufacturing experience allowed to create a variety of collections and come up with new technical solutions. For the kitchen, the manufacturer offers a series of Antico, Old England, Classic. There are models for mounting in a sink or in the wall in front of her. All products are made of brass and can bake in the oven to increase the strength of the paint or chrome. Buyers in reviews are satisfied with the 6-year extended warranty, provided directly to the crane boxes.
Experts ranked the company as the best because of the availability of mixers with separate execution. For example, in the Stel collection there are models for mounting in three holes. The spout is attached to the back of the sink, and hot and cold water levers can be pulled out on the side of the sink or even to the front. This helps improve ergonomics by the kitchen.
- brass casting;
- inside ceramic crane boxes;
- 6 year warranty;
- soft flexible eyeliner for connection.
- high price;
- some models have complicated installation.
The date of foundation of the company is 1945. Erkki Paasikivi created company in Finland and began to specialize in products for energy and water conservation. Then the range was expanded to plumbing and shower systems. Now the company offers for the kitchen single lever, non-contact, double lever mixers, and also with side control. There are systems for low pressure. To this the manufacturer owns the world’s first crane with response to a hand offering invented in 1990.
And now the company is not far behind the technological fashion, continuing release news on the principle of opening water. For example, the Allessi series refers to tiptronics for the kitchen, which are triggered by a light touching hands to the nose. After that, water is supplied for 6 seconds and off (factory setting). If you touch spout and hold your finger for 1 s, then the flow starts with 60 sec. On the side of the crane there is a regulator temperature, allowing you to set a comfortable value. If you a know-how lover, then take a look at the products of this manufacturer.
- produces mixers for low pressure;
- original technical solutions;
- there are automatic models running on a transformer, included in the package;
- the design is developed with the participation of the artist Rodrigo Torres.
- some plastic parts in the construction;
- high price.
Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.