When repairing a car or bicycle, it is easy to put on clothes engine oil stain. But getting rid of it is very difficult. Especially if you start to display it not immediately, but after a while. Conventional detergents and stain removers will not help to cope with this problem. But our experts found out and checked on the effectiveness of several ways to remove stains from engine oil and rush to share them. By the same means you can remove traces of any oil pollution: engine oils, technical grease, fuel oil, etc.
Basic rules for removing oil stains
Engine oil is a general concept that includes not only light oily liquid for greasing door hinges, bike chains or sewing machine mechanisms, but also darker and thick oil for automotive engines (motor), various lubricants (solid and liquid).
There are three types of engine oils:
mineral – based on oil followed by distillation and cleaning;
synthetic – based on synthetic hydrocarbons, derived from refined products;
semi-synthetic – based on no more than 20% synthetic components.
Thus, any oil consists of petroleum products and has high chemical stability, firmly eating into the fibers of the fabric. That is why it is very difficult to bring it out – it is necessary to use solvents or strong alkalis.
If an oil stain appears on clothing, then remove without a trace, you need to follow a few rules.
Dealing with pollution as soon as possible is best in first minutes. Only fresh oily stains can be removed. fat dissolving agents.
To prevent the spread of stains over a large area if possible, pour salt, soda, crushed on it chalk, starch. These powders have absorbent properties and quickly absorb most of the oil. Enlarge them efficiency is possible by preheating to 50-600C in microwave or pan.
Do not wash or soak things in hot water if oily spots have not been previously treated with adsorbents – the size of the contaminated area may increase.
Before processing in any way, it should be placed under contaminated area substrate – folded several times towel. So the oil after dissolving does not contaminate the clean product surface.
When removing old oil stains with delicate solvents fabrics or stained items should first be checked how they will act on the material and on the paint in an inconspicuous area products, and only then apply the product.
When working with solvents, be careful: work in durable rubber gloves, a respirator, protective glasses. In addition, it is important to consider that these products are easy to are flammable, so you need to clean things away from open fire.
Industrial stain removal
Engine oil stains are difficult to remove impurities that cannot be removed with ordinary stain removers and washing powder. That is why the developed special industrial means for their removal:
Dr. Beckmann – stain remover for engine oil, grease and bitumen, 50 ml (Germany) – 130 rubles.
Mellerud – oil stain remover (Germany) 500 ml – 650 rubles.
Duty Oil – liquid for removal of technical oils, lubricants materials and petroleum products, 5 l (Russia) – 1000 rubles.
Pro-Brite Axel-6 Oil & Grease Remover – Aerosol Remover spots from vegetable and technical oils (Russia), 300 ml – 350 rubles.
CLEANMULTI FORTE Pramol – Alkaline Grease Remover and oil (Switzerland), 1 liter – 550 rubles.
All products contain a special combination of solvents and non-inogenic surfactants for quick and effective removal oil pollution.
People constantly encountering machines and with various mechanisms you must have at hand one of funds. They are guaranteed to help remove even old traces. lubricants, machine or engine oil.
Folk removal methods
If a special tool that removes traces of engine oil no, then do not rush to the store to buy it. To start you need to try to use improvised tools and solvents, which can be found at home or purchased in any household the store.
How to remove fresh spots
If less than an hour has passed since the clothes were soiled, then oil pollution can be removed using the following ways. They are suitable for all types of fabrics, white and colored. of things:
Laundry soap (72%). Moisten the soiled area hot water and rub heavily with soap. After 30 minutes, clean stain with a brush and rinse off.
Dishwashing liquid. Undiluted product pour on the contaminated area, leaving for 20-30 minutes. Before, how to wash off the liquid, rub it with a brush.
Ammonia. For delicate fabrics should be diluted ammonia in water in a ratio of 1: 1. For cotton and linen apply it without diluting. Ammonia must be left in place. contamination for 15-20 minutes, then rub with a sponge and rinse water.
Gall soap (or liquid stain remover based on it). Contains fatty acids and bile bile, well eliminating oily spots. Soap a trace of engine oil (until formed copious foam), wait 40-60 minutes, rub with a brush and rinse water.
Ethanol. Rub with a swab dipped in alcohol oil pollution until the traces disappear completely.
After treating clothing stained with machine oil with any of ways, you need to wash it with detergent in the washing car or manually.
Advice! Before removing the oily stain, iron stained space through tracing paper or parchment paper with an iron (set the temperature according to the type of fabric). Oil part it will be absorbed into the paper, and it will become easier to remove the stain.
How to remove old marks
To remove stains of oil that are already deeply absorbed in fiber fabric, solvents must be used. But we have to consider that most of them are not suitable for silk, wool, synthetics, as well as colored things. In total, we found 5 effective ways to remove old spots:
Refined gasoline. Best used for cleansing delicate and dyed fabrics. It is based on the same as in engine oil, oil, so it will dissolve it and help relieve clothes from stains. Dampen a cotton pad or cloth with gasoline. and gently rub the soiled area with it. Can put disk directly on the stain for 15-20 minutes, then brush it with soft villi.
Gasoline and dishwashing liquid (or baking soda). An even more gentle way to remove a long-standing trace of engine oil. Mix the components in a ratio of 1: 1 and for 30 minutes apply the mixture on spot. Having rubbed the pollution with a brush, send the item to the wash.
Ammonia with turpentine. This combination also safe for thin and natural fabrics, but for the processing of colored things, it’s not good. Both agents are mixed in equal proportions and rub the mixture into the contaminated area. After waiting 30 minutes, rub cloth with a brush and rinse off.
Solvent 646, acetone or white spirit. Good output oil stains, but we recommend using them only for clarification of light cotton or linen fabrics. With a napkin dampened with solvent, wipe the stain until completely disappearances. To avoid stains, you need to clean, moving from the edges of the contaminated area to the center.
Kerosene. Also a petroleum solvent machine oil. With a cotton swab soaked in kerosene, you need wipe the stained area until oil marks disappear. Then soap with household soap and rinse under running hot water. Immediately after processing, the product must be washed. Kerosene is not suitable for removing stains from colored items and clothing made from silk, synthetics.
After cleaning clothes from oil stains with solvents or ammonia remains a specific unpleasant odor. You can get rid of it by washing a thing with fabric softener and drying in the open air.
Stains from fuel oil or engine oil are very difficult to derivation. If none of the methods help resolve pollution or doubts that you can save your beloved thing yourself, you can take help specialists.
Dry cleaning is a reliable way to get rid of traces of machine oils on clothes that will not require any effort from you. Things from any material will be provided with qualified assistance without risk ruining it.
Due to the multicomponent composition of engine oil and hard-to-remove base from petroleum products to remove traces from him is not easy. But, using the advice of our experts, it is still possible to do this. If you do not postpone processing and washing the soiled thing in a long drawer, then the chances of saving it with available assets increase significantly. Old oil dirt can only be removed by solvents or dry cleaning.