16 best automobile compressors

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Compressor – piston type electric pumping unit, designed for forced air injection and pumping wheels of cars, bicycle cameras, boats, and also opportunities production of a number of works requiring a pneumatic drive.

Problems of acquiring wheel swap compressors cars due to the factor filling the market with substandard models. In such realities, it is difficult for the consumer to navigate not only by main characteristics, but also by manufacturers, trustworthy in their products. In this regard, the magazine presents a rating of 16 best models of automobile compressors in three different categories selected based on:

  1. detailed comparison of operating parameters;
  2. level of reliability and durability;
  3. analysis of consumer reviews;
  4. expert judgment;
  5. indicators of cost, prevalence and novelty.

How to choose a car compressor

Choosing a car compressor for pumping wheels is logical continuation of the development of pumping technology, designed to make life easier for car owners. In connection with his this instrument includes a very serious purpose many subtleties and features that should be addressed attention when choosing. The magazine highlights five main aspects.

Type of appliance. All compressors are divided into two large groups:

  1. membrane work in which is carried out by gradual compression of air by constant reciprocating movement of a flexible rubber membrane. You can meet such a system in ordinary hand pumps, which are still used today, however, more for pumping bicycle tires than automobile wheels. The disadvantage of this the compressor is the inability to work at low temperatures – the membrane installed in the pump is compressed and hardens to cold, and when trying to pump air can break down.
  2. piston – the most reliable and popular type of compressor, work in which is carried out according to the following principle. Metal the connecting rod is attached to the shaft coming from the electric motor, without spacers for additional plastic elements. Such a performance guarantees the product a long service life by ensuring durability to frictional wear. The second variation of reciprocating compressors, with teflon rings, has an even greater supply of working life without the need for maintenance during operation. True, for such the design will have to lay out a little more than for the piston electric compressor without the introduction of various “lotions”.

Performance. Regarding this parameter, we give clear and concise recommendations. For car owners compressors with a capacity of about 30 liters per minute, not requiring additional fuss with power. SUV owners may need pumps, whose performance is 40-45 liters per minute. All, what’s more – tools for heavy vehicles that require not from a regular cigarette lighter in the cabin, but directly from battery terminals. And, since such units create a serious network load, excess of adequate parameters may result in a complete burnout of the wiring.

Type of pressure gauge. Pressure gauges on automobile compressors There are two types: analog and electronic. First represent most familiar to most domestic motorists dial-arrow system, but have a very serious drawback – large measurement error. The second is relatively new. high output measuring systems informative and small error value.

If you have a choice, we recommend that you pay attention on compressors with an electronic pressure gauge. If the choice fell on an analog model, then choose a dial with a single scale measurements (in bars or kg / cm2).

Continuous operation time. Parameter that requires clear consistency with performance. In general there can only be one recommendation: always try to get a compressor whose continuous operation tends to high limits (30 to 60 minutes). An example in which is traced such a need, very commonplace: with an SUV and low-power electric pump pumping wheels (say on 16-inch tires) can take about 1 hour, because the motors low-performing models tend to overheat under high loads and long loads.

Length of hose and power cord. Banal trifle that can obscure the use of automobiles in an instant compressor in the future. Need to clearly count power cord length for easy swapping rear wheels of the car, and, if possible, take the device with a small by stock. With the hose, things are somewhat different: of course, also it is desirable to have a long (5-8 meters) twisted adapter for everything occasions, however, with its meter variations (with sufficient length of the power cable) you can get along. Let it bring some inconvenience.

Rating of the best automotive compressors

Nomination a place Name of product price
The best compressors for cars 1 Greenworks G40AC 7 940 rub.
2 Berkut R17 4 850 rub.
3 Heinner maxxair pro 2 900 rub.
4 Alca 227,000 1 946 rub.
5 Agressor AGR-50L 2 590 rub.
6 Ryobi R18I-0 3 900 rub.
7 Kachok k60 2 700 rub.
8 Autoprofi AK-35 Digital 2 990 rub.
The best compressors for SUVs and special equipment 1 Berkut R24 11 500 rub.
2 Daewoo DW90 6 690 rub.
3 Agressor AGR-160 6 920 rub.
4 AVS KS 900 3 199 rub.
5 Berkut PRO-24 12 950 rub.
Best stationary compressors with receiver 1 WESTER LE 050-150 OLC 10 100 rub.
2 Patriot 24-260 Pro 10 390 rub.
3 Fubag OL 195/24 CM1.5 8 500 rub.

The best compressors for cars

Greenworks G40AC

Rating: 4.9

Greenworks G40AC

Inexpensive oil-free compressor made in China, working from an autonomous source of electrical energy. As such in the case of Greenworks G40AC, the G-MAX 40V battery acts sold at retail and with a capacity of 2 or 4 Ah. An important advantage of the compressor over competitors is also the presence of a two-liter receiver. This design element performs the role of a kind of “fuse” against overload: by when pressure reaches 8 bar, the receiver automatically device shutdown. When exceeding the maximum pressure air is vented through a valve through which similarly, you can drain the liquid that has got into the system compressor.

As users note, the charm of working with the Greenworks G40AC lies in high information content. On the model body two pressure gauges are installed, one of which shows pressure directly in the receiver compartment, and the second – output pressure directly to the hose. By the way, the last the indicator can be adjusted by means of a special valve mechanism. As such, the particular disadvantages of this car the compressor does not have: the design of the case causes small issues, however, people understand that everything is packed in standard colors Chinese company.

Advantages

  • productivity is 40 liters per minute;
  • two manometers with convenient scales (in bars);
  • the presence of the receiver;
  • powered by an autonomous source (does not require a connection to battery terminals);
  • the ability to adjust the outlet pressure.

disadvantages

  • not found.

Berkut R17

Rating: 4.8

Berkut R17

Berkut R17 – a development aimed at lovers of compact and to the best of productive devices. At first glance, this car compressor seems like a “shorty”, since a short hose with quick-detachable mechanism located on the discharge head. However, the first impression is misleading: in the same kit there is 7.5 meter full twisted hose with deflator, connected to quick release.

In terms of pumping speed, the Berkut R17 also surpasses its more large-scale competitors, since not every one of them has with a productivity of 55 liters a minute. The noise level of the device at this is quite low and is 67 decibels. As for power consumption, then in the case of working with this device power will have to carry out directly from the battery through crocodile terminals, and the peak load on the circuit can be up to 18 amp. Fortunately, in this case, the compressor has a circuit protection against overload and overheating, which is triggered after 20 minutes of his continuous work.

Advantages

  • high build quality;
  • presence of overheating and overload protection circuits;
  • high productivity (55 liters per minute);
  • small overall dimensions;
  • moderate noise level (67 decibels).

disadvantages

  • very inconvenient gauge scale (in PSI units).

Heinner maxxair pro

Rating: 4.7

Heyner MaxxAir Pro

Good performance car compressor development, different from the mass of good ergonomic and performance indicators. Maximum pressure that can organize Heyner MaxxAir Pro, is nearly 10 atmospheres, which is suitable for inflating tires in cars, and for servicing heavier SUVs. Peak compressor capacity is 50 liters per minute, at that the power consumed from the network is only 500 Tue

A slight drawback for consumers in this car compressor is the length of the swap hose: 1 meter for the possibility comfortable use will be clearly not enough. However, all this compensated by the length of the power cord, which is 3.4 meters. Other features of the Heyner MaxxAir Pro include the presence of dual gauge analog pressure gauge, main (most intuitive) of which shows the pressure in bars (kg / cm3). Is worth this compressor is relatively inexpensive, and from the standpoint of the worker its resource is more than enough for a minimum of 5-7 years.

Advantages

  • The optimum ratio of price and quality;
  • convenient gauge with a dual scale;
  • stable supporting tile of the compressor;
  • high working resource;
  • productivity is 50 liters a minute.

disadvantages

  • short swap hose (only 1 meter).

Alca 227,000

Rating: 4.7

Alca 227,000

Alca 227,000 – an improved analogue of the Heyner MaxxAir Pro compressor with two cylinders and battery powered. Possesses power of 300 watts, but at the same time produces vigorous 50 liters of air in a minute. Withstands pressure of 11 atmospheres, due to which it can (albeit for a long time) to inflate the wheels of off-road vehicles. Generally, technical aspects look very good, especially compared to not at the highest price. True, there is a small nuance that Regarding the current strength: at a nominal voltage of 12 volts, the compressor may require about 40 amperes for normal functioning, which creates a pretty strong load on car wiring.

As for the ergonomic features of the Alca 227,000, then here it is worth highlighting the successful construction of the support under two workers cylinders. The length of the air supply hose is 1 meter, and if would not be a long power cord (4.2 meters), then the situation with convenience use would be highly doubtful. The pressure gauge is analog, but according to users, very accurate and easy to read information, since the scale is adapted to the unit of measurement “bar”.

Advantages

  • the best combination of price and quality;
  • two working cylinders;
  • informative pressure gauge in the central part of the device;
  • high performance at low power;
  • holds pressure up to 11 atmospheres.

disadvantages

  • quite large requirements for amperage.

Agressor AGR-50L

Rating: 4.6

Agressor AGR-50L

One of the best solutions for the budget segment, which fit into given frames with great difficulty. It has a number of useful and, most most importantly, simple solutions that are difficult to find in analogs. For example, the notorious LED flashlight in the side parts, very convenient when pumping wheels in the dark. Or quick release on a complete five-meter hose. Or special a hose tip containing both a deflator and a manometer, thanks to which it is possible to carry out pressure relief with wheels without using the pump itself.

Regarding the technical aspects of Agressor AGR-50L, here it is worth highlighting a very good ratio of performance and engine power. At 280 watts of energy, this a car compressor delivers 50 liters of air per minute, providing yourself with an excellent indicator of efficiency. Three meter wire power goes to the “crocodiles”, explicitly alluding to the need to power the installation from the battery. As informant on the compressor marked analog gauge with double scale (one of which, the largest and most intuitive, shows result in bars and has a step of 0.1 units). Definitely great option for its value.

Advantages

  • high efficiency;
  • quick-detachable mechanism;
  • the presence of LED backlight for work in the dark;
  • 50 liters per minute at 280 watts power;
  • An informative pressure gauge is located on the hose.

disadvantages

  • thin section power wires – may require self-replacement with thicker ones (relevant for northern regions).

Ryobi R18I-0

Rating: 4.5

Ryobi R18I-0

A technologically advanced compressor from the Japanese company Ryobi is the most recent development of this segment. It’s easy track not only in appearance but also in components, which stand out from other competitors. First first of all, the first (!) digital pressure gauge in the collection is striking high precision measurement located in the central part compact installation. In addition, there are mode enable buttons battery life and built-in protection against overheating, not giving engine to rest from processing.

The maximum pressure allowed in the Ryobi R18I-0 is 10.3 bar. Moreover, his work is entirely tied to powered by an independent source, i.e. from a built-in battery. Lack of wires makes it much easier operation of an already ergonomic installation, since its weight barely exceeds 1.7 kilograms. In this case, write a short air hose in flaws will be akin to bias, for autonomy brings freedom to opportunity manipulations.

Advantages

  • high level of permissible pressure (10.3 bar);
  • the presence of motor protection against overheating;
  • full mobility thanks to the built-in battery;
  • the presence of convenient holders for hoses;
  • digital pressure gauge.

disadvantages

  • not detected.

Kachok k60

Rating: 4.5

Kachok K60

The Kachok K60 automotive compressor is very similar in design to a competitor from Autoprofi, but is quoted by consumers for several positions above. Its capacity is 35 liters per minute, which limits applicability only to pumping passenger wheels cars. The pressure in the maximum speed can be up to 7 atmospheres, and for a device of this level this is more than acceptable.

The main advantages of the Kachok K60 are ergonomic parts, since manufacturers are thoroughly confused precisely by this. So, a small suitcase equipped with a bright yellow pad, which will not let him get lost neither in the grass, nor in the snow, nor among other surfaces. An LED appeared on the side a flashlight that greatly facilitates any manipulation in the dark Times of Day. In addition, various sensors that measure on-board voltage, and temperature, and even operating parameters of the generator. All this splendor is displayed on Main LCD: respectively, the model is equipped with a digital pressure gauge, which distinguishes it from a number of more powerful competitors.

Advantages

  • an abundance of sensors measuring the parameters of the onboard network, work generator, temperature, etc .;
  • common LCD display;
  • good performance for a compact device;
  • the presence of a flashlight;
  • secret pocket in the compressor body for storing nozzles and small parts.

disadvantages

  • low power of the device;
  • an abundance of functions that adversely affect the overall health.

Autoprofi AK-35 Digital

Rating: 4.4

Autoprofi AK-35 Digital

Inexpensive and compact entry-level swap compressor wheels of cars, swinging at the laurels of a universal device with functions of parallel diagnostics of network operating parameters. Otherwise explain the availability of sensors for checking wiring voltage and operation the generator just doesn’t work. As for the parameters of the compressor, then it is worth noting a performance of 30 liters per minute, maximum pressure of 6.5 atmospheres and the presence of digital pressure gauge with high measurement accuracy.

It becomes clear that with such modest opportunities for mainstream Autoprofi AK-35 Digital cannot guarantee yourself a high place in the ranking. However among the best this model was still able to, mainly due to additional functions. So, you should highlight the ability to manually enter the desired pumping pressure, after which the device turns on and automatically completes the process upon reaching the required result. For added convenience in the design of this a car compressor was introduced and an LED light, the presence of which is particularly distinguished by consumers.

Advantages

  • availability of sensors for checking the on-board network operability and generator;
  • flashlight operating in two modes;
  • high precision digital pressure gauge;
  • the ability to automatically manually set the required tire pressure.

disadvantages

  • a large percentage of defective parts of the compressor;
  • small technical parameters.

The best compressors for SUVs and special equipment

Berkut R24

Rating: 5.0

Berkut R24

Development close to the professional series Berkut automotive compressors but superior to all key parameters. Model R24 – a real breakthrough in the field compact compressor units, combining efficient excellent heat dissipation methods performance. The cold engine of this device allows carry out continuous pumping of air for 60 minutes, which is the best result within the entire rating. Productivity, in turn, is almost 100 liters per minute, and allows you to pump the wheels in the shortest possible time time.

For the most accurate pressure dosage in the Berkut R24 design a deflator is provided that responds very subtly to the slightest exits of the indicator beyond the relevant limits. Normal working pressure, according to manufacturers, is 6.89 atmosphere, but the device can withstand up to 14 atmospheres if there will be a great need for that.

Advantages

  • high level of productivity (98 liters per minute);
  • extended equipment (twisted extension hose, nozzles for various needs, reinforced air filter);
  • the longest time of continuous operation (60 minutes);
  • creating pressure up to 14 atmospheres;
  • high build quality.

disadvantages

  • not found.

Daewoo DW90

Rating: 4.9

Daewoo DW90

The main premise of getting into the rating for Daewoo DW90 is increased uptime that was achieved due to the use of competent methods of heat removal from the motor. If a in standard segment models, this value reached (at best case) up to 20 minutes, then this car compressor can twist crankshaft up to half an hour. Receiving voltage from the battery terminals, he capable of delivering up to 90 liters of air per minute, catching up to the opponent’s performance indicators represented by AVS KS 900. The maximum pressure in the chamber can reach 10.2 atmospheres, which equals 150 psi units.

As noted by consumers, test measurements of pumping wheels through Daewoo DW90 show very good results. So, for example, the configuration wheel R15 / 195/60 manages to pump to the required minimum (2.3 atmospheres) in just 30 seconds. Of other features of this compressor can be identified, in General, very nice design, the presence of a base plate at the bottom and convenient rubberized handle (through which air passes branch pipe) for carrying. The weight of the model is almost per kilogram exceeds that of AVS, but you can’t say anything about her inconvenience.

Advantages

  • extended uptime (30 minutes);
  • high degree of reliability;
  • neat appearance;
  • availability of a bag for transportation and a set of 3 nozzles;
  • high productivity (90 liters per minute);
  • ergonomic design.

disadvantages

  • not found.

Agressor AGR-160

Rating: 4.8

Agressor AGR-160

Contrary to the low price, the Agressor AGR-160 automotive compressor manifests itself as a kind of hypertrophied analogue competitive models, which is always present in any segment of a large market. It has a phenomenal ability to pumping air by a piston mechanism, providing forcing at a rate of up to 160 liters per minute. What is characteristic for its nutrition just connecting to the battery, however, the load created to the network can be a serious wiring problem. 42Amperes of current required – a task for heavy trucks and SUVs that they handle well.

It is noteworthy that manufacturers are very confused regarding the usability of Agressor AGR-160. Proof of this is the presence of an eight-meter hose on quick hooks, which allows you to manipulate the device like that will be anything. The length of the power cord, in turn, is only 2.4 meters, however, if desired, it can be easily increased (however, with a loss of warranty for a free two-year service in case of breakage). An important factor in convenience is visual analog pressure gauge, the main scale of which is reserved for the usual Russian user readings in bars. End up before we are one of the best compressors in the segment, value for money which superior to similar indicators of competitive models.

Advantages

  • highest performance in class (160 liters per minute);
  • convenient analog high-precision pressure gauge;
  • long air hose (8 meters);
  • optimal combination of price and quality.

disadvantages

  • not identified.

AVS KS 900

Rating: 4.7

AVS KS 900

A very cheap and very efficient car compressor Chinese-made, the efficiency of which is largely surpasses a similar parameter of other representatives of the rating. With a rated power of 350 watts, it is able to pump 90 liters of air per minute, allowing up to 10 bar of pressure in the chamber compression. With such indicators (and a quick look at the price) involuntarily the question arises: how low is the reliability indicator of this models?

According to users, the AVS KS 900 is the rare case when worry about working for a long period use is not worth it. Yes, the device has certain problems with analog gauge readings (error may increase over time), but otherwise it fulfills soundly enough. The temperature regime does not leave practically no chance to go beyond the acceptable border, the benefit of the range varies from -35 to +80 degrees Celsius. Current consumption from the network does not exceed 30 amperes, and the weight, as befits a normal device, is 4.5 kilograms.

Advantages

  • high productivity (90 liters per minute);
  • wide temperature range;
  • good reliability;
  • optimal power consumption and, as a result, high Efficiency
  • lowest price in the segment.

disadvantages

  • big questions to the safety of individual structural elements in the course of operation.

Berkut PRO-24

Rating: 4.7

Berkut PRO-24

The most powerful representative of the professional compressor line Berkut could not compete with more flexible models in terms of total cost, ergonomic and operational indicators. Which in no way speaks of its complete worthlessness. Performance Berkut PRO-24 is 47 liters per minute with an energy consumption of 250 watts. This ratio indicates high efficiency of the installation, causing small losses energy to heat the motor.

As for the parameters of permissible operating temperatures, then manufacturer honestly outlined frames from -30 to +80 degrees Celsius, which were subsequently confirmed more than once independent tests from fans to get to the truth. The maximum working pressure in the compressor chamber can reach up to 10.5 atmospheres, which is quite suitable for working with wheels heavy cars and SUVs. In terms of cost, this the model comes out slightly more expensive than its opponents, which is significantly influenced the popularity.

Advantages

  • wide range of operating temperatures;
  • efficient combination of power and performance;
  • high efficiency;
  • good working pressure in the chamber compressor.

disadvantages

  • high price.

Best stationary compressors with receiver

WESTER LE 050-150 OLC

Rating: 4.9

WESTER LE 050-150 OLC

A device with a high cost and a very rational approach to coordination of technical parameters. WESTER LE 050-150 OLC – a compressor with a capacity of 1,500 watts and a capacity of 206 liters per minute, allowing you to freely adjust the pressure in range from 1 to 8 bar. It is considered the most successful model of this small workshop-oriented manufacturer industrial or home level.

The main advantage of this compressor is the volume of the receiver (50 liters), thanks to which it is possible to significantly reduce time for re-injection of air. Also, since WESTER specializes not only in the production of compressor equipment, in a wide variety of its products can be found pneumatic tools and equipment. For the purposes of such special equipment was installed on the LE 050-150 OLC quick removals so that users do not bother with long and painstaking change of connection elements. In general, the device was made with a clear eye on usability, for which he was awarded undeniable leadership in its category.

Advantages

  • optimal ratio of receiver volume (50 liters) to the total productivity (206 liters per minute);
  • the presence of fast removal mechanisms connecting elements;
  • the ability to fine-tune pressure in the range from 1 to 8 bar;
  • An abundance of body kits designed specifically for this compressor.

disadvantages

  • not found.

Patriot 24-260 Pro

Rating: 4.8

Patriot 24-260 Pro

Chinese-made compressor with a rather controversial reputation, but an extremely high degree of popularity. His the main advantage lies in the most optimal ratio cost parameters and technical characteristics that are noted almost all consumers, experts and people close to the segment compressor technology. At a rated power of 1800 watts Patriot 24-260 Pro performance is an astounding 260 liters per minute, which leads to the use of the model in garages or small production and repair facilities.

But the most controversial aspect of this compressor is equipped with a receiver, the volume of which barely reaches 24 liters. In this regard, there is a need for periodic shutting down the unit for re-pumping air. IN otherwise, the nuances encountered are not so critical, and they can cause problems only in some specific situations.

Advantages

  • power consumption at 1800 watts;
  • there is a special pad of thick rubber, significantly reduces vibration and noise;
  • productivity is 260 liters per minute;
  • low price for such a productive installation.

disadvantages

  • low receiver volume with high performance.

Fubag OL 195/24 CM1.5

Rating: 4.7

Fubag OL 19524 CM1.5

By chance closes the line of the best stationary compressors device manufactured by the German company Fubag, performance which amounted to almost 180 liters per minute. However, the main advantage of this model is not in the plane technical parameters, since there is a “battle” with competitors was knowingly lost. The main plus is the highest German quality expressed in the durability of the apparatus as a whole and its individual nodes in particular.

Paying attention to the smallest details, it should be noted that from Other models Fubag OL 195/24 CM1.5 compares favorably and weight (only 19 kilograms). The receiver here is 24 liter, and, judging from the point of view of industrial purposes, then even this indicator may be enough. Maximum pressure in the receiver can be up to 8 bar, but in case exceeding this indicator in its design there is a graduation valve venting excess compressed air. From the position safety and durability indicated above, the model is gorgeous, and has as many rights to be bought on the market as her more productive analogues.

Advantages

  • the presence of forced air cooling, excluding overheating during prolonged operation of the compressor;
  • piston rings are made of graphite-teflon alloy. It has place increase of working resource;
  • high degree of reliability;
  • productivity is 180 liters a minute.

disadvantages

  • technical indicators are lower than competitors.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment