14 best vertical milling machines

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Vertical milling machines are used for chamfering, trimming edges, grooves and grooves. Using copy bushings can cut out wavy shapes and perform complex patterns on wooden surface. If you need such a tool, then consider the top 14 worthy vertical milling machines characteristics and high quality, which is confirmed by reviews buyers. This will help to understand the variety of models and better. understand which router to choose for your needs.

Rating of the best professional vertical milling machines

Our experts, when compiling a review, analyzed on analytical portal https://rankquality.com/wood-routers/ the following key parameters: milling stroke, power, mass equipment and ease of holding, speed and additional functions. All this affects the tasks with which A woodworking machine is able to handle, and its cost. First, consider professional devices that are powerful 1800-2300 W motors and advanced features. This allows work comfortably with equipment for 6-8 hours every day.

Nomination a place Name of product price
top professional vertical milling machines 1 Festool OF 2200 EB-Set 22 929 rub.
2 BOSCH GMF 1600 CE Professional with emphasis + L-Boxx 33 895 rub.
3 Makita RP2300FC 18 614 rub.
4 DeWALT DW 625 E 21,286 rubles
5 CALIBER FE-1900 / 12M + 5 505 rub.
The best semi-professional vertical milling machines 1 Makita RP1801F 15 952 rub.
2 BOSCH POF 1400 ACE + 6 milling cutters 8 999 rub.
3 Makita MT M3600 11 552 rub.
4 RYOBI RRT1600P-K 8 415 rub.
The best household vertical milling machines 1 BOSCH POF 1200 AE 5 398 rub.
2 Makita RP0900 6 882 rub.
3 Interskol FM-40 / 1000E 3 507 rub.
4 Hammer FRZ1200B 3 137 rub.
5 CALIBER FE-1000M 2 899 rub.

Festool OF 2200 EB-Set

Rating: 4.9

Festool OF 2200 EB-Set

In the first place is the product from Festool, which was developed exclusively for professional purposes. Its power is 2200 W with function to maintain constant engine speed load ensures reliable surface milling in any conditions. The vertical hand machine has a soft start, thanks to which the master can guide the cutter to the beginning of the intended line and start the motor without a jerk. Speed ​​adjustment from 10,000 to 22000 allows to process both hard and soft rocks wood at the right speed so that there are no burned edges traces. In reviews, owners praise the power of the device and the system tool-less tool changes. For this, the manufacturer has implemented here is FastFix technology. Setting the sole and tracing rings also does not require keys.

We marked the vertical model as the best because of the opportunity mill to a depth of 80 mm. The manual machine also has a function lifter lift. Even when the wooden cultivated area is large, and the master has to reach far to conduct the milling cutter, depth the completed line will be the same, and this significantly increases quality of work.

Advantages

  • sold with a dust collector;
  • there is a speed adjustment;
  • convenient to transport in a durable case;
  • long network cable 3.5 m.

disadvantages

  • no snap in the kit;
  • high price.

BOSCH GMF 1600 CE Professional with emphasis + L-Boxx

Rating: 4.8

BOSCH GMF 1600 CE Professional with emphasis + L-Boxx

In second place is the product from the German brand Bosch. Vertical the milling cutter has clamping collets with diameters of 8-12 mm and can move 76 mm down-up cutter. The manufacturer equipped the equipment soft start functions and speed control from 10 to 25 thousand in a minute. An LED diode is provided in the area of ​​the sole, which facilitates visibility in poorly lit places. Centering item for sale cone, dust adapter, copy sleeves and one the cartridge. Owners in reviews like the parallel emphasis, which convenient for fine tuning when making grooves and grooves, which especially useful when decorating overhead doors panels.

We considered the vertical apparatus the best due to the presence of patented depth adjustment system. She is different from analogues in that it allows you to change values ​​even in fixed position. This allows the master to easily produce adjustment along the line, without stopping the work. Such functionality saves time and improves accuracy of tasks.

Advantages

  • comfortable rubberized handles;
  • strong support sole;
  • capacious case;
  • work area illumination.

disadvantages

  • high price;
  • there is some backlash rack submersible base;
  • two wing screws of fastening are missing.

Makita RP2300FC

Rating: 4.7

Makita RP2300FC

Makita also produces vertical hand milling machines for professional activities, among which stands out RP2300FC. The model has an aluminum sole and is already integrated into it parallel emphasis. The right milling cutter handle is provided fuse and start key. The support stand is different good visibility due to open execution, and plexiglass glass protects the eyes of the operator. The milling cutter has a smooth start, speed adjustment in the range of 9-22 thousand minutes and backlight. The maximum diameter of the cutter that the device will “pull”, is 50 mm. 4 m long network cable does not require use of carrying. Users in reviews like that elevator works without distortions and jams.

Our experts drew attention to the milling cutter due to the increased power. 2300 Watt is the highest in the category and designed for intensive use, possibly even in two shifts. The increased power of the vertical tool allows confidently mill hardwoods, such as ash, beech, oak, etc.

Advantages

  • easy replacement of graphite brushes;
  • comfortable rubberized handles;
  • aluminum support platform reduces overall weight tool;
  • work area illumination.

disadvantages

  • the handles are periodically loosened;
  • sold without mills;
  • no bus adapter.

DeWALT DW 625 E

Rating: 4.6

DeWALT DW 625 E

The American brand “DeVolt” among professional milling cutters with a vertical stroke of the tool, the DW 625 E stands out. The model is endowed power of 2000 W and is able to maintain constant speed, since their number is electronically regulated. At if necessary, you can connect an adapter for a vacuum cleaner to the equipment, to increase the cleanliness of the workplace. Soft start makes it easy beginning of the process. The number of turns of a milling cutter is regulated by the user from 8000 to 20,000 per minute. Judging by the reviews, customers like a vertical immersion depth of 80 mm, which is suitable for inserting door locks. More owners are happy the ability to lock the start button so as not to hold it constantly in the clamped position.

In our opinion, the product is the best due to the presence of three support bolts in the sole, which allow you to set the desired depth of immersion for the most common jobs. When switching to standard operations, the wizard will be able to configure the milling cutter in one touch, which significantly saves time when you want to mill boards with several sizes of grooves.

Advantages

  • spindle lock for quick tool change;
  • there is a rack for connecting a machine to a vacuum cleaner;
  • large rubber coated handles;
  • quiet motor operation.

disadvantages

  • there are no copy inserts in the kit;
  • Warranty replacement is not uncommon.

CALIBER FE-1900 / 12M +

Rating: 4.5

CALIBER FE-1900 / 12M +

The electric router can process wood, aluminum and plastic at a depth of up to 50 mm. Engine power 1900 W is enough for solid materials with a margin. The device weighs 5.2 kg. Adjustment speed allows you to adjust the rotation in the range of 6000-26000 rpm Includes parallel focus and copy bushings.

This is the most affordable model among professional ones. Despite the budget, it has all the functions, as well as more expensive “brothers”: soft start, speed control, adapter to connect the suction. Another distinguishing feature the milling cutter stands for the possibility of reducing the speed to 6000 rpm, which competitors are not capable of. This allows processing the most dense materials so that there are no burn marks on the chamfers. IN reviews masters recommend goods for the carpentry workshop to set the machine stationary on the table and use it as a machine. For more demanding tasks in the selection of grooves, it is not much suitable because the cartridge has play.

Advantages

  • designed for collets 8 and 12 mm;
  • you can lower the speed to 6000 rpm;
  • start key lock;
  • high-quality parallel emphasis.

disadvantages

  • short power cord 2 m;
  • comes in a box;
  • the lower bearing is poorly insulated from dust;
  • there is play in the design.

The best semi-professional vertical milling machines

This category contains power tools suitable for private workshop or periodic use, for example, when embedding furniture. Its power is 1400-1700 watts, and number of functions can lose to professional equipment. But by bundling such a product is more profitable, as it may contain several types of soles and equipment, although it will not be of the best quality.

Makita RP1801F

Rating: 4.9

Makita RP1801F

Model from the Makita semi-professional class stands out reliable motor with a long service life. Vertical milling machine endowed power of 1650 W and untwists rigging up to 22000 rpm. Working the cutter stroke is 70 mm. The model weighs 6 kg and has a length of 31 cm. The machine works with 12 mm collets. Built-in backlight makes it easy operation in poorly lit places. But since the equipment semi-professional, then there is no adapter for dust removal, soft start and speed control. To buyers in reviews I like that the milling cutter can be installed on the table, upside down, and this allows you to use it as a stationary machine. For such it has a lockable start key and a screw height adjustments can be reached through the hole in the sole.

Our experts have introduced a vertical milling device in list of the best due to the presence of an electronic engine brake. it allows you to quickly stop the rotation of the snap in an emergency and improves overall safety when handling the device. IN daily operation, this function saves a little time, Helping you move from one process to another faster.

Advantages

  • easy brush replacement;
  • protective glass on the sole;
  • ergonomically shaped rubber handles;
  • diode illumination of the lower part.

disadvantages

  • no speed control;
  • sold in a box;
  • there is no possibility to connect a dust removal system;
  • 2.5 m short power cord.

BOSCH POF 1400 ACE + 6 milling cutters

Rating: 4.8

BOSCH POF 1400 ACE + 6 milling cutters

Among the semi-professional equipment stands out milling machine “Bosch” POF 1400 ACE, which has an electronic stabilization system Constant-Electronic, which improves performance, regardless pressure efforts by the operator. Still vertical the machine contains a wheel to adjust the speed in the range 11000-28000 per minute. Vertical adjustment accuracy 0.1 mm thanks to patented Fine technology Depth

Control The motor power is 1400 W, and the stroke reaches 55 mm. The sole area is equipped with a backlight, and the cartridge works with 8 mm collets. Reviews show that in this milling cutter there is BOSCH-SDS system, which allows you to install snap-in without the use of additional tools.

The product fell into the review of the best due to the configuration with 6 milling cutters, which allows you to immediately apply it in the workshop without additional attachments. Also, the model of the rod along which the moving part walks, closed by corrugation. This protects them from dust and increases smoothness of vertical movement.

Advantages

  • sold in a plastic case;
  • replacement of keyless equipment;
  • precise vertical adjustment;
  • There is a setting for the number of revolutions.

disadvantages

  • to replace the brushes, you have to disassemble the case;
  • flimsy fixation system of a fixed size.

Makita MT M3600

Rating: 4.7

Makita MT M3600

In the MT series, Makita has changed its traditional colors and releases equipment in a red case. Vertical router M3600 has a power of 1650 watts and makes up to 22,000 rpm, but it is impossible to regulate them. Depth of vertical travel is 6 cm, which is enough for both figured surface milling and for inserting locks and chamfering. Installation weighs 5.5 kg s dimensions 28x15x30 cm. Rubberized ergonomic handles make it easier to hold the tool even in summer when your hands are sweating. The working area is characterized by increased visibility and is protected by a durable glass. Owners in reviews like double reliable insulation, which is well suited to harsh workshop conditions (someone steps on the wire, the board may fall on the cable, etc. d.).

We have included the product in the review of the best because of the opportunity to work with milling cutters with a shank of 12 mm. Most semi-professional vertical apparatuses are designed for indicator 6 or 8 mm.

Advantages

  • protective glass to prevent dust from escaping;
  • ergonomic handles;
  • simple connection of a parallel emphasis;
  • easy brush replacement.

disadvantages

  • power cord 2 m;
  • there is no illumination of the working area;
  • sold without a case.

RYOBI RRT1600P-K

Rating: 4.6

RYOBI RRT1600P-K

The milling cutter from the Robi brand is equipped with an electric motor with a capacity of 1600 W and adjusts the vertical stroke of the snap in the range of 0-55 mm. The rotation speed is set from 10,000 to 26,000 rpm. At pressure from the operator, the milling intensity is not falls. In the kit, the manufacturer provides photocopiers inserts and collets 6 and 8 mm, as well as an adapter for dust removal. Goods are sold in a plastic case that decides the issue of storage. IN reviews the owners like the light weight of the milling machine 3.95 kg, which simplifies manipulation and prevents hands from getting very tired, compared to using vertical models of 6-7 kg.

The chip of this milling cutter is the increased ergonomics of the arrangement governing bodies. All controllers are in the access area. thumb and forefinger of the right hand. Moreover, the start button and locks are located on the left handle, so make adjustments work without stopping the workflow. Yet the vertical unit is notable for the entry point of the network cable into case – it is located on one of the handles, not at the top in engine. This design reduces the height of the tool, which facilitates access to low places, such as niches, during assembly cabinet furniture.

Advantages

  • electronic speed control;
  • it is possible to connect a branch pipe and a vacuum cleaner;
  • easy maintenance with self-replacement of coal brushes;
  • anti-slip coating of handles.

disadvantages

  • collets only 6 and 8 mm;
  • without backlight;
  • weak shaft lock button;
  • centering roller is uneven.

The best household vertical milling machines

Category of vertical chuck milling machines Designed for hobby or private use in your own workshop. Functionality and equipment depend on the manufacturer, and the main advantage of the product is the price. But the cars are designed only for periodic use, otherwise their resource will not last long that’s enough.

BOSCH POF 1200 AE

Rating: 4.9

BOSCH POF 1200 AE

In this category is not the first place milling cutter from the “Bosch” POF 1200 AE. The household vertical model has a power of 1200 watts and spins cartridge up to 28000 rpm with the possibility of lowering to 11000 rpm IN The kit already has one cutter for starting work, as well as two collets 6 and 8 mm. The manufacturer took care of the copy inserts and parallel emphasis, which is very generous for the household class of goods. The depth of vertical immersion of the equipment is 55 mm. Weigh 3.4 kg milling machine, so it is easy to manipulate. The rods are covered with corrugated casings so that wood dust does not hit the stem and did not slow down the lowering process or lifting up. In reviews, the device is praised for the spring-loaded lever height changes with self-locking.

We considered the household router to be the best due to the presence of a system in it. Bosch-Electronic rpm stabilization used in more “older” models. Electronics monitors the rotation of the shaft and provides more constant rotation, regardless of changing load.

Advantages

  • there is a limiter of milling depth;
  • scale for fine tuning the vertical stroke;
  • speed adjustment;
  • soft non-slip handles.

disadvantages

  • no backlight;
  • You can not put a shank of 12 mm;
  • flimsy mount dust extraction pipe.

Makita RP0900

Rating: 4.8

Makita RP0900

The milling cutter has a power of 900 watts, and the vertical stroke snap is 35 mm. Two mushroom-shaped handles are convenient for hold, and a built-in start button in the handle simplifies the process launch. The model works with 8 mm shanks and spins the cartridge up to 27000 rpm. The goods are delivered in a box. The sole is wide thanks to what the milling cutter stably settles on a surface. To her you can attach a parallel emphasis, which is already in the kit. The scale on the side with the lock allows you to precisely set the depth so that to sustain the size. In the reviews, owners praise household goods for high-quality assembly and lack of backlash in fastening of a support.

This is a very convenient “baby”, which can crawl into such niches for selection of grooves where other devices will not fit. Due short rods and low base the height of the vertical model is only 25 cm (versus 28-35 cm from competitors). Weight 2.7 kg too is one of the easiest in the category.

Advantages

  • wide aluminum stand;
  • rubber coating of handles;
  • good visibility of the working area;
  • Fine adjustment of the screws on the stop.

disadvantages

  • no soft start;
  • speed is not adjustable;
  • No adapter to remove dust.

Interskol FM-40 / 1000E

Rating: 4.7

Interskol FM-40 / 1000E

This vertical milling machine is like an angle grinder, only with the output of the shaft at the end. A sole with two spring-loaded rods to adjust the vertical stroke cartridge up to 44 mm. The model has no side handles, so hold the machine accounts for the very “body” of the body. Start key located in the center and you can reach it both right and with your left hand. The power of the equipment is 1100 W and it spins tooling from 10,000 to 25,000 rpm. Manufacturer provides 6 and 8 mm collets, as well as copy inserts. The maximum diameter of the cutter that the machine will “pull” is 30 mm

Our experts rated the household router as the fastest transition from one size to another. The sole is provided for swivel wheel with 5 steps of different heights. This is more than enough for heterogeneous processes for selecting grooves, chamfering and other works. The wizard can adjust each size and then only rotate this support stand for a quick transition.

Advantages

  • lockable start key;
  • good visibility of the working area;
  • copy inserts in the kit;
  • backlight from the LED element.

disadvantages

  • no side arms;
  • no soft start;
  • “float” turns;
  • brushes sparkle strongly.

Hammer FRZ1200B

Rating: 4.6

Hammer FRZ1200B

The Hammer brand offers a vertical milling machine with a capacity of 1200 W, which immerses snap up to 55 mm. Already included copy holder and parallel emphasis. To user rotation speed adjustment from 16 to 30 thousand per minute is available using the wheel in the thumb area of ​​the right hand. Weigh unit 4.3 kg. It has a transparent casing for suction sawdust so that it does not interfere with the operator controlling the process processing. Vertical racks are protected against dust and provide smooth lowering of the machine.

In our opinion, the milling cutter is the best in rotation speed. He is capable untwist the cartridge to 30,000 rpm. Such characteristics allow process non-dense materials at high speed, which increases overall performance.

Advantages

  • easy brush replacement;
  • rods are protected from dust;
  • reliable parallel emphasis;
  • transparent pipe for connecting to a vacuum cleaner.

disadvantages

  • does not keep revs under load;
  • sold in a box;
  • keys are required to replace accessories;
  • without backlight.

CALIBER FE-1000M

Rating: 4.5

CALIBER FE-1000M

The review concludes another household model with a housing from angle grinders, but its the sole contains two lateral rubber handles, so hold and steering the milling cutter is much more convenient. 1000 Watt machine suitable for profiling, grooving and grooving, removing chamfers, fit edges. The working stroke of the cutter is 30 mm. Cartridge able to clamp shanks of 6 and 8 mm. Product dimensions are 19x13x32 cm and weighs 4 kg. Motor spins snap in range 11500-30000 rpm. The manufacturer provides to him a transparent branch pipe for dust removal. The start key is located in the middle and convenient for access by both right and left hand.

We found the best power tool in terms of ratio price and quality. He has a speed control, included already one mill for work is delivered and on the case are provided comfortable side handles. Based on affordable cost and availability development up to 30 thousand rpm, this is the optimal device for various domestic needs.

Advantages

  • transparent shield protects from dust;
  • connection to the vacuum cleaner is possible;
  • easy brush replacement through service hatches;
  • two mushroom-shaped arms.

disadvantages

  • revolutions “float”;
  • “hits” the cartridge on long milling cutters;
  • without copy inserts;
  • abrupt start.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment