13 best glued beam manufacturers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

In the Russian construction market there is a boom in glued timber. This material has become widely used for the construction of residential cottages, summer houses, baths and gazebos. Material enjoys in demand due to high strength, good heat insulation properties and ease of installation. All these qualities are present only in quality timber. Since demand creates supply, today the user is offered both domestic and foreign products. Find the best combination of price and quality will help recommendations of our experts.

How to choose a glued beam

  1. Profile Dimensions. Today, manufacturers have mastered a wide range of sizes. For example, section profile parameters vary from 45×130 mm to 275×275 mm.
  2. If the house is planned to reside permanently, then the thickness timber should not be less than 200 mm. Summer house can be built from material 160 mm thick.
  3. The optimum height is in the range of 170-190 mm. Sometimes builders recommend buying a beam up to 230 mm high.
  4. Since glued beams are a set of slats, it is important pay attention to their thickness. The thinner the board, the less quality timber is considered.
  5. The length of the beam. Depending on the project of the house, the buyer should choose correctly the length of glued beams. Not everyone manufacturers can offer logs longer than 12 m. The disadvantage of long bars is expensive transportation and more complex installation of the structure. If the company produces lumber up to 6 m long, this indicates obsolete equipment in the shops. When docking short logs increase construction costs.
  6. The length of the lamella. Another factor that testifies to quality glued beams. This is the length of the lamellas, which are connected into a single whole. The shorter the individual elements, the worse the quality of the beam. Experts advise giving preference to logs consisting of lamellas more than 1.5 m long.
  7. Environmental friendliness. Safe residence of residents in the house depends on the environmental friendliness of the beam. The main source of harmful compounds is glue. Foreign brands have long switched to melamine, polyurethane and EPI formulations. Most secure EPI glue is considered. The most budgetary glued beam can contain phenol-formaldehyde resins, such a material is suitable only for street arbor.
  8. The homogeneity of the beam. When examining glued beams it is important pay attention to the uniformity of the lamellas. Ideally, they should be made of one wood species. If the manufacturer used different types of wood, then the probability of timber deformation is high when change in relative humidity. And this will lead to education cracks and cracks in the log house.

We have selected 13 of the best manufacturers of glued beams. All these brands successfully operate in the Russian market. In drawing up The rating took into account the opinion of the expert community and reviews domestic consumers.

What is better glued or profiled beam

Type of timber

Advantages

disadvantages

Glued

+ resistance to torsion and cracking

+ high strength

+ wide selection of sizes

+ minimal shrinkage

– high price

– glue may release harmful compounds

– worse air exchange

Profiled

+ low price

+ natural air exchange

+ environmental friendliness

– tendency to dry and torsion

– limited length

– shrinkage of the house over time

Rating of the best manufacturers of glued beams

Nomination a place manufacturer rating
Rating of the best manufacturers of glued beams 1 Lameco Lht Oy 4.9
2 Kontio 4.9
3 Timber frame 4.8
4 Finnlamelli 4.8
5 Tree module 4.7
6 GK Priozersky Timber Plant 4.7
7 Honka 4.7
8 Vishera 4.6
9 Holtz House 4.6
10 Factory “OLES” 4.5
11 GLAVSTROY 365 4.5
12 Yevlashevsky MLC 4.4
13 DDM-Stroy 4.3

Lameco Lht Oy

Rating: 4.9

LAMECO LHT OY.jpg

Finnish company is a young producer of glued beams Lameco Lht Oy. However, in a short time the manufacturer managed seriously expand its scope of activity. The company started with manufacturing small orders, and since 2011, customers began to be offered service for the construction of houses from glued beams. Today Lameco Lht Oy holds a leading position in the Finnish market. Ready Kits homes are shipped to 20 countries. Great interest products the Finnish manufacturer causes among Russian consumers. The experts consider the glued beam of this brand one of the best in the world.

The manufacturer becomes the winner of our rating for reliability, beautiful appearance, environmental friendliness. Users satisfied with the high quality of the timber, but the high price holds back sales growth.

Advantages

  • high quality;
  • environmental friendliness;
  • beautiful appearance;
  • durability.

disadvantages

  • high price.

Kontio

Rating: 4.9

KONTIO.jpg

A pioneer in the manufacture of glued beams is Kontio company. The employees of this Finnish company were invented new building material. Brand products are good familiar outside the Scandinavian Peninsula. The highlight of the experts consider the use of arctic pine, which is harvested in winter season. German is used as an adhesive system composition, it does not contain harmful to humans and the environment compounds.

Experts pay attention to dense fiber thanks to this structure, heat is retained as much as possible and durability of the house is provided. Cons include rich assortment of cross sections, good ready-made house kits. TO disadvantages include high price.

Advantages

  • dense fiber;
  • environmentally friendly glue;
  • strength and reliability;
  • durability.

disadvantages

  • high price.

Timber frame

Rating: 4.8

Timber Frame

Since 1995, a company has been operating in the small Finnish town of Kuhmo Timber Frame. A small company began operations with production of log houses. Gradually customer inquiries changed, so the company had to upgrade its lines. Today, the manufacturer offers a unique rounded log, solid rectangular and glued beam. Ready-made house kits are delivered to different countries of the world, including Russia. Consumers appreciate the high quality of the timber, which is made from arctic pine, perfect balance of the house in terms of humidity and heat, environmental friendliness.

The brand is in the top three in our ranking for wide a line of glued timber and excellent heat engineering parameters. The downside is the high price.

Advantages

  • full production cycle;
  • wide range of sections;
  • environmental friendliness and safety;
  • high thermal performance.

disadvantages

  • high price.

Finnlamelli

Rating: 4.8

Finnlamelli

Many years of experience (over 30 years) in the field of wood processing allows Finnlamelli Finnish company to keep leading positions not only in their own country, but also in Russia. As main raw materials the manufacturer uses selected Scandinavian pine and spruce. Using modern processing technologies, it is possible to achieve reliability, environmental friendliness and durability of the material. On the the Russian market supplies a wide range of lumber, and also ready-made house kits for original designs. Besides, the company provides building assembly services.

Most users are pretty quality glued beams. But there are negative reviews regarding the assembly of houses. therefore the brand stopped a step away from the prize three of our rating.

Advantages

  • rich assortment of lumber;
  • reliability and durability;
  • environmental friendliness;
  • outstanding house designs.

disadvantages

  • There are complaints about the assembly of houses.

Tree module

Rating: 4.7

MODUL TREE.jpg

The Russian company Modul Drev recently joined the fight for the domestic consumer, but has already managed to bypass many recognized leaders. First of all, the construction company puts before us the task of high-quality production of glued beams. Also a special division of the company is engaged in the design of houses, baths and gazebos from glued beams. Company managed to lower the time interval from the start of design to the construction of the object turnkey up to 3 months. For the manufacture of timber, pine and spruce from the forests of the Arkhangelsk region.

Experts have included the brand in our rating at affordable prices and stable work. But the range of glued beams so far not enough to get around the lead group.

Advantages

  • favorable prices;
  • high-quality manufacturing;
  • tight deadlines for the development and implementation of the project;
  • environmentally friendly raw materials.

disadvantages

  • modest range of glued beams.

GK Priozersky Timber Plant

Rating: 4.7

GK PRIOZERSKY FORESTRY.jpg

Since 1999, the company GK has been operating in the Russian timber market Priozersky Forest Plant. This largest player in the Northwest Krai has a full cycle of wood processing. Company specializes in the production of glued beams and the construction of him houses. Each year, more than 150 house kits are produced. Product quality is confirmed by certificates, the company participated in the construction of facilities for the Sochi Olympics-2014. The manufacturer offers customers 6 sizes of timber, as well as many types of lumber.

The brand falls into our rating for the environmental friendliness of glued beams, fast assembly of houses, low thermal conductivity. Take higher place to the manufacturer failed due to the high price and the appearance cracks in the beam after 3-5 years.

Advantages

  • environmental friendliness;
  • quick assembly of houses;
  • keeps warm for a long time;
  • a wide range of.

disadvantages

  • high price;
  • cracks appear in the beam.

Honka

Rating: 4.7

Honka

The legendary company Honka is engaged in wood processing with 1958 The manufacturer began its activity as a family enterprise, today it is an international corporation with production sites in 30 countries. Finnish Products The brand is sold in 50 countries. Even the house of the British Queen this company built. HONKA became a pioneer in Russian the market. The line of glued beams consists of 5 sizes, experts note the high quality of the multi-lamella beam. What prevented famous brand take a higher place in our ranking?

The first drawback is users consider the high price. Dissatisfaction is also expressed with the builders who are building at home. Due to a violation of technology in the future, the beam is cracking.

Advantages

  • centuries-old traditions;
  • innovative technologies;
  • quality timber;
  • developed distribution network.

disadvantages

  • high price;
  • low-quality work of builders.

Vishera

Rating: 4.6

Vishera

An authoritative Russian manufacturer of glued beam houses considered the company of vishera. The company was founded in 1993, for relatively short time employees managed to accumulate invaluable experience in both the design and manufacture of timber and the assembly of houses. The manufacturer specializes in creating elite home kits categories. The Russian company in the forefront switched to industrial house-building methods from glued beams. Moscow Region the plant has a full production cycle, it can annually create up to 100 house kits.

Users are satisfied with the microclimate in the houses of Visher, the pace construction work. But over time, the beam starts to creak and clicks, heat leaves the house and condensate builds up.

Advantages

  • full production cycle;
  • modern technologies;
  • own developments and inventions;
  • advanced equipment.

disadvantages

  • high price;
  • miscalculations in design.

Holtz House

Rating: 4.6

Holtz-House.jpg

Products are not inferior to Finnish glued beams in anything Russian company Holtz-House. Young producer is building wooden houses since 1998, both standard and individual projects. The company offers domestic consumers a wide range of services. By combining the best world traditions of wooden home building with innovative wood processing technologies an ambitious player manages to maintain a leading position in our country. Raw materials for the production of glued beams are imported from Komi Republic.

A brand does not rise to a higher position in our ranking allowed negative feedback from consumers. Often deadlines are broken supply of house sets, fungus quickly appears on the bottom ranks.

Advantages

  • many house designs;
  • high-quality raw materials;
  • wide range of services;
  • innovative technologies.

disadvantages

  • delivery deadlines for house sets are disrupted;
  • poor antiseptic treatment.

Factory “OLES”

Rating: 4.5

Factory OLES

The leading producer of glued beams in Russia is timber processing plant “OLES”. Thanks to the use of modern technology and the availability of its own raw material base, the company manages to create home kits adapted to our climate. Length glued beam reaches 13.5 m, so it is possible to implement the most unusual projects. The construction team of the plant is working all year round, so the number of completed projects is constantly growing. The main raw material is traditional pine and spruce, which harvested in the Arkhangelsk region, Siberia and Valdai.

Domestic consumers tested the quality of glued beams OLES during construction and operation. Instead of 5 lamellas in logs there are up to 9, and the edges of multi-lamellar logs quickly come off.

Advantages

  • long beam;
  • full production cycle;
  • environmentally friendly raw materials;
  • reasonable prices.

disadvantages

  • unstable quality.

GLAVSTROY 365

Rating: 4.5

GLAVSTROY

The company GLAVSTROY 365 began its activities in the field of wooden housing construction with the design of rural cottages. Gradually appeared their own construction crews and production sites. Today the company offers a wide range services, from project visualization to construction Full construction. Experts note the affordability of products, for which the brand falls into our ranking. Actively employees of the enterprise work with clients, confirmation of this is the use of a large number of customer projects (up to 60% of all work).

Flattering feedback from users about quality glued beams and meeting the deadlines for the construction of houses. Only the range of products is poor.

Advantages

  • quality timber;
  • attentive attitude to customers;
  • design assistance;
  • skilled builders.

disadvantages

  • meager assortment.

Yevlashevsky MLC

Rating: 4.4

EVLASHEVSKIY DOC.jpg

The wood processing plant Evlashevsky DOK has a glorious a story. Only in 1958 did he survive several upgrades production, change of ownership, destruction of old workshops and the construction of new modern sites. Accordingly, with the same the frequency of the range of products changed. Today the workers of the plant set ambitious tasks, they build houses, saunas and gazebos from glued beams throughout the country. Experts took into account the feedback from domestic users and gave the brand 12 place in our ranking.

One of the main problems faced home kit buyers, there was a delay in supplies. Because of this I had to postpone the construction time, resolve contentious issues in a court.

Advantages

  • rich experience in woodworking;
  • construction of houses throughout the country;
  • modern production;
  • reasonable prices.

disadvantages

  • delivery times are often disrupted;
  • ineffective feedback.

DDM-Stroy

Rating: 4.4

DDM-STROY.JPG

Over 12 years engaged in the production of glued beam houses company DDM-Stroy. She is considered a recognized leader in the field. low-rise housing construction. In 2014, the brand won the award. Lesstroy Awards in the Manufacturer of the Year Award. Company may boast of its own production of glued beams. Production workshops are equipped with modern equipment, on The enterprise cultivates a high production culture. The brand falls into our rating for quality glued beams, rich experience in design and construction of houses and a three-year warranty.

The minuses of glued beams consumers include a high price, and the number of houses built while the company does not boast can.

Advantages

  • modern woodworking equipment;
  • high production culture;
  • rich experience in designing;
  • three year warranty.

disadvantages

  • high price;
  • a small list of completed facilities.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Add a comment