12 best chippers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

Wiring in a house with concrete or brick walls is one of the most dirty and time-consuming types of work. Similar problems await homeowners who want to hide water pipes in the wall or floor. Facilitate the fate of installers, as well as to reduce the pollution of rooms are capable of chippers or furrowers. These devices allow you to get neat grooves where different communications will completely hide. Thanks to diamond blades the cut is of perfect quality, and by connecting the vacuum cleaner to special pipe on the casing, you can assemble the entire construction garbage is still at the stage of formation of the strobes. Today in the domestic the market is quite widely represented this type of electric tool. To select the most suitable chipper, experts advise to pay attention to the following parameters.

How to choose a chipper

  1. The diameter of the disk. One of the defining points when choosing Stroboreza is the diameter of the installed disk. Than he is bigger the deeper you can make a groove.
  2. Power. As disk size increases, so does engine power. It is desirable that the electric motor has some stock, otherwise the tool will often overheat and disconnect.
  3. Destination. When buying a device, it is important to consider the frequency its application. For major repairs in one or In several rooms, a budget chipper is suitable. But the builders, who use the device daily, choose professional models, despite the high cost.
  4. Design. Structurally distinguish single-disc and multi-disc chippers. The device with one disk turns groove with the same width. And in double-disc models, the width The cut can be adjusted. However, the groove is not always completely cleaned of concrete, which requires additional labor costs.
  5. Functionality. Functional content may not Excite amateur masters greatly. But when using for several hours the operator will immediately feel the chamfer advantage of soft starters, electronic adjustment revolutions, anti-vibration system, overload protection.

Our review included the 12 best chippers. Upon selection Applicants took into account the opinions of experts and reviews of builders.

Rating of the best chipper

Nomination a place Name of product price
The best shtroborez with a diameter of a disk of 125 mm 1 Metabo MFE 40 22 402 rub.
2 AEG MFE 1500 24 699 rub.
3 Hitachi CM5SB 9 636 rub.
4 Violet B2-30 5 630 rub.
The best shtroborez with a diameter of a disk of 150 mm 1 Messer T1455 16 150 rub.
2 Makita SG150 40,992 rub.
3 Hammer STR150 6 500 rub.
4 BISON ZSh-1500 7 709 rub.
The best shtroborez with a diameter of a disk of 230 mm 1 BOSCH GNF 65 A 51 592 rub.
2 Hitachi CM9UBY 19,962 rub.
3 BISON Shtroborez (furrower) ZSh-P65-2600 PVSTK 12 460 rub.
The best shtroborez with a diameter of a disk more than 300 mm 1 Makita 4114S 39 999 rub.

The best shtroborez with a diameter of a disk of 125 mm

For sawing in concrete or brick building small and neat groove designs disc diameter 125 mm. Most often, such devices can be seen in hands of electricians. Experts have selected several effective appliances.

Metabo MFE 40

Rating: 4.9

Metabo MFE 40

The professional shtroborez Metabo MFE 40 represents productive and reliable device for fast furrows 10-40 mm deep in concrete or brick substrates. Model ahead of its closest competitors in a number of key ways, winning in our ranking. Powerful electric motor (1.9 kW) allows you to set the maximum gating speed by varying the width grooves from 9 to 35 mm. When working, the electronics supports the set speed, making progress even. About critical load signaling LED indicator. For work safety Soft start and automatic safety clutch meets.

Users note usability, connectivity to the vacuum cleaner, stability during gating.

Advantages

  • convenient adjustment of the depth and width of the groove;
  • light weight;
  • high-quality assembly;
  • high performance.

disadvantages

  • high price.

AEG MFE 1500

Rating: 4.8

AEG MFE 1500

The AEG MFE 1500 chisel cutter looks a bit more modest. The model is inferior to the winner of the rating in maximum depth (30 mm) and the width (26 mm) of the groove, power (1.5 kW), the absence of electronic maintaining constant speed. Achieve performance the apparatus was possible due to the high speed of rotation (9500 rpm). Experts speak out positively regarding convenience in work. For operator comfort, a soft start is provided, attached additional handle, a reliable protective cover is installed. To the device you can plug in a vacuum cleaner to immediately remove dust generated in the process of gating.

Builders are pleased with the compactness and ease of use shtroboreza. Cons call the device disadvantages power and overpriced.

Advantages

  • compactness;
  • convenience in work;
  • smooth start;
  • maneuverability.

disadvantages

  • insufficient power;
  • high price.

Hitachi CM5SB

Rating: 4.7

Hitachi CM5SB

The best combination of price and quality boasts Japanese Stroborez Hitachi CM5SB. It is perfect for doing grooves up to 30 mm deep and up to 34 mm wide. Experts identify two important advantages of the model. Structurally, the device stands out among competitors single-disk equipment. The operator does not have to delete concrete or brick that stays between two cuts. Second plus instrument – lightness. With a mass of 2.9 kg, furrows can be made without tired on the ceiling panels. The manufacturer took care of comfort operator, making an ergonomic handle with soft inserts.

Experienced craftsmen along with positive qualities discovered and significant drawback. The device is not equipped with rollers, which makes Strobing in masonry is an uncomfortable activity. Model takes third line of the rating.

Advantages

  • lightness and maneuverability;
  • ergonomics;
  • affordable price;
  • good build quality.

disadvantages

  • missing videos.

Violet B2-30

Rating: 4.6

Violet B2-30

To carry out repairs in an apartment or house on your own an inexpensive domestic shtroborez Fiolent B2-30 will do. A double-disc device is capable of making high-quality grooves with maximum size 30×30 mm. Despite the availability, the device does not inferior to competitors in such parameters as power (1.6 kW), stepless adjustment of the depth and width of the cut, soft start, start button lock, extra handle. Manufacturer thought and about the safety of your product, equipping it with overheating protection and accidental start-up, reliable casing.

Builders have some complaints about the operation of the device. They unhappy with short power cord, uncomfortable grip handle casing. Therefore, the depth of the gating is limited to 25 mm. Model not falls into the top three ranking.

Advantages

  • low price;
  • overload protection;
  • smooth start;
  • power.

disadvantages

  • unsuccessful casing mount design;
  • short wire.

The best shtroborez with a diameter of a disk of 150 mm

Mount electrical wiring, hide water pipes in walls and floors succeeds with the help of universal chippers. They are equipped saw blades with a diameter of 150 mm. Here are the best representatives in this categories.

Messer T1455

Rating: 4.9

Messer T1455

High power, unique 5-disc design and acceptable the price allowed the tessellator Messer T1455 to win in our rating. Depth of a cut is regulated in the range of 1-42 mm, and maximum groove width is 38 mm. The cutting zone is fed water, which allows to extend the life of diamond blades. it especially true given the high power (2.5 kW) and large number of revolutions (8500 rpm). The manufacturer thoroughly thought anti-vibration system, so even with prolonged use the operator does not get tired.

Professional builders praise power affordable price, ease of operation. Weak point in the device is the design of the dust collector, which is especially felt when using a disc with a diameter of 150 mm.

Advantages

  • high power
  • high-quality cut;
  • anti-vibration system;
  • ease of operation.

disadvantages

  • inefficient dust removal;
  • heavy weight (8.5 kg).

Makita SG150

Rating: 4.8

Makita SG150

The reliable and durable Makita SG150 chipper is inferior winner of the ranking in performance and price. The model is equipped 1.8 kW engine, which in combination with two cutting discs allows you to get a furrow with a depth of up to 45 mm and a width of up to 35 mm. The strengths of the device experts consider high comfort and convenience for the operator during work. The device weighs a little (5.7 kg), has a soft start system, and for transportation there is capacious case. Anti-vibration pad on the handles reduces the impact of a powerful tool on the user’s hands. Included there are intermediate rings, a finger and a wrench, but the discs will have to be purchased separately.

Builders are comfortable with ease of movement, precise adjustment cut depths, the presence of an overload indicator.

Advantages

  • convenience and comfort;
  • light weight;
  • good cover;
  • reliability.

disadvantages

  • high price;
  • it is difficult to make vertical strobes.

Hammer STR150

Rating: 4.7

Hammer STR150

A successful combination of power (1.7 kW), lightness (5.5 kg) and equipment is available in the Hammer STR150 chipper. The model is comfortable in work due to the presence of a soft start and maintaining constant revolutions. The manufacturer has provided protection against accidental inclusion. Another important advantage of the device is a 5-year-old a guarantee that confirms the high quality of workmanship. Reliable protection of the operator from dust and splinters provides metal casing. The maximum depth of the strobes is 43 mm, and you can adjust the width in the range of 1-30 mm.

Users find this wall chaser easy and reliable tool. It can be seen in the hands of electricians and plumbers. Of the shortcomings, the low efficiency of the system is often mentioned. dust removal even when a construction vacuum cleaner is connected.

Advantages

  • affordable price;
  • 5 year warranty;
  • ease;
  • rich functional content.

disadvantages

  • dust is poorly removed.

BISON ZSh-1500

Rating: 4.6

BISON ZSh-1500

Not the highest power (1.5 kW) among competitors Shtroborez ZUBR ZSh-1500. However, the device is capable of making decent furrow (45×45 mm) in concrete and brick substrates. therefore the model perfectly fits the role of a universal tool, allowing you to mount both electrical networks and water supply. Pleasantly struck the Russian-Chinese product with durable aluminum case, while competitors offer traditional plastic. Also, the advantages of the device include light weight (5.9 kg) and availability of the option of soft start. Experts note comfortable design change of saw blades.

With all its advantages, the chipper is located only on the fourth ranking place due to user reviews. They are unhappy with the short cord and insufficient power for working with concrete.

Advantages

  • low price;
  • durability;
  • comfortable grip.

disadvantages

  • short cord;
  • lack of power for shredding concrete to the maximum depth.

The best shtroborez with a diameter of a disk of 230 mm

When building new homes or conducting major repairs in buildings often require a tool with a disc diameter of 230 mm They have high power, but at the same time have a lot of weight. Specialists drew attention to the following models.

BOSCH GNF 65 A

Rating: 4.9

BOSCH GNF 65 A

The BOSCH GNF 65 A shtroborez is created for professional activities. This can be guessed by the blue color of the tool and high price. Engine power (2.4 kW) is enough to do in concrete or masonry, deep grooves up to a depth of 65 mm and up to 40 mm wide. For comfortable work, the manufacturer has equipped soft start, inrush current limiting and protective casing with keyless adjustment. Can be connected to a wall chaser a wide range of domestic and foreign vacuum cleaners. Excellent model balanced, high power did not significantly affect the weight (8.4 kg). Experts gave the German instrument the palm in rating.

Professional builders confirm productivity and convenience in work of a chipper. Depth and width of cut is enough as for electricians and for plumbers.

Advantages

  • power;
  • interfaced with various vacuum cleaners;
  • deep cut;
  • long cord.

disadvantages

  • high price.

Hitachi CM9UBY

Rating: 4.8

Hitachi CM9UBY

One of the most powerful (2.6 kW) chipper in its class is a model of Hitachi CM9UBY. In this case, the motor is able to dial record speed (6600 rpm). Due to these characteristics a single-disc device is capable of making deep in brick or concrete (60 mm) and wide (80 mm) groove. To operate such an apparatus without tired for a long time, the manufacturer made an ergonomic handle with corrugated coating. Important safety features include safe shutdown button, protective cover. Durability electric motor provides efficient ventilation and protection against overheating.

The Japanese shtroborez lost to the winner of a rating in trifles. From fasteners can be unscrewed by vibration, the suitcase is made too large and heavy, dust extraction does not differ in strength.

Advantages

  • high performance;
  • wide groove;
  • light weight (8.1 kg);
  • convenience in work.

disadvantages

  • unscrew the bolts;
  • flimsy dust extraction.

BISON Shtroborez (furrower) ZSh-P65-2600 PVSTK

Rating: 4.7

BISON Shtroborez (furrower) ZSh-P65-2600 PVSTK

High power (2.6 kW) and low price have become key factors of popularity of the ZUBR ZShBR ZSh-P65-2600 PVSTK shtroborez. The manufacturer is so confident in the quality of the assembly of his product, which gives the tool an extended 5-year warranty. Through grooves you can make deep grooves (65 mm) at maximum 40 mm wide. Of the useful features, it is worth noting a soft start, overload protection and constant revs maintenance system. This double-disc apparatus is inferior to the leaders of the ranking in weight (10 kg).

Users liked the simple stepless adjustment. cut depths, effective anti-vibration protection, effective dust removal. It is convenient to carry the device along with the equipment in company case.

Advantages

  • high power
  • low price;
  • anti-vibration system;
  • stepless adjustment of the depth of cut.

disadvantages

  • a lot of weight.

The best shtroborez with a diameter of a disk more than 300 mm

The deepest cuts are capable of making chippers equipped with saw blade with a diameter of more than 300 mm. With such a device you need carefully cut thin walls and panels so as not to accidentally do through hole. Experts liked one device.

Makita 4114S

Rating: 4.9

Makita 4114S

When a part is required deep grooves in concrete or brick masonry, then it is worth paying attention to the Makita single-disk shruborez 4114S. Powerful device (2.4 kW) is able to penetrate into the base to marks of 125 mm. The model is equipped with a diamond blade with a diameter of 355 mm. Soft start allows you to make a neat cut, and for protection gearbox and operator in case of disk lock invented unique drive design with clutch. Completely closes saw blade metal casing, efficient dust extraction system allows to carry out construction work with minimal pollution.

Professional builders prefer Makita wall chaser 4114S for the possibility of deep grooves. In this case, on parameters such as high price and high weight go by the wayside (10.3 kg).

Advantages

  • the deepest cut;
  • convenience and comfort in work;
  • drive with coupling;
  • safety at work.

disadvantages

  • high price;
  • a lot of weight.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply