12 best ball bearings manufacturers

Review of the best according to the editors. About the selection criteria. The the material is subjective, is not advertising and is not serves as a guide to the purchase. Before purchase is needed consultation with a specialist.

The movable connection of the wheel hub to the lever is provided ball bearing. This node is a two-part construction. Inside the case is a metal ball with a finger, on which there is a thread. To eliminate loopholes in the assembly polymer inserts are used, and reduce friction during cornering helps special grease. Ball Bearing Life can reach 100-150 thousand kilometers, with the appearance of backlash and safety knock should immediately replace the responsible knot. Our reliable recommendations will help you find a reliable spare part. experts.

How to choose a ball joint

Types of leverage. Automakers use several varieties of swivel.

  1. Collapsible levers are characterized by an inexpensive replacement of the ball joint. In the repair time is removed from the suspension of the car lever together with the support, and then a new spare part is mounted in place of the worn-out assembly. The only drawback of this design is the need wheel alignment after repairs.
  2. Fixed levers are delivered to the distribution network along with the pressed-in spherical support. On the one hand is not required additional adjustments, and the process of replacing the lever assembly looks easier. But the cost of the node often exceeds all costs repair work.

Number of ball bearings. Motorist after diagnosis suspension in service stations may be unpleasantly surprised by the need to replace several ball bearings.

  1. The simplest is the design of the front suspension MacPherson, where one ball joint is used with each side. Usually it has a lower location.
  2. If the suspension is multi-link, then on each side there is lower and upper ball bearing.
  3. There are special rear suspension designs, where also levers with ball bearings are used. Most often they set on top.

Accessories. Supplied with ball joint some additional components.

  1. To protect the swivel joint from moisture and dust, rubber corrugated anthers. It is from the quality of these elements the longevity of the ball joint often depends. If a motorist misses the moment of cracking rubber, then the days of the hinge numbered.
  2. Securely fix the boot on the ball joint. ring. Some manufacturers forget about this element, which causes the boot to slip off the seat socket.
  3. To install the ball bearing on the lever, mounting hardware is also required. elements. These are bolts with nuts, as well as a special finger nut with polymer stopper.

Symptoms of wear. From timely wear detection ball bearing depends on the safety of the driver and passengers. Before as the knot falls apart, the following warning signs appear moments.

  1. Most often, a knock occurs in the suspension, it is especially distinct heard on bends if there are bumps in the road.
  2. In frosty weather, a strong creak while driving.

We selected 12 best manufacturers of ball joints in the review. Them Products are delivered to all regions of Russia. In distribution places considered the opinion of the expert community and reviews domestic car owners.

Rating of the best manufacturers of ball bearings

Nomination a place manufacturer rating
Rating of the best manufacturers of ball bearings 1 Lemforder 5.0
2 Clickthrough rate 4.9
3 Masuma 4.8
4 Delphi 4.7
5 555 4.6
6 Moog 4.5
7 RUVILLE 4.4
8 Nipparts 4.3
9 Mapco 4.2
10 TRW 4.1
11 TRACK 4.0
12 Cedar 3.9

Lemforder

Rating: 5.0

LEMFORDER

The famous German company Lemforder was founded in 1947 on north of Germany. A year later, suspension parts began to be delivered. to the country’s car factories. Today, products are delivered to conveyors. major concerns such as GM, Ford, BMW, Fiat, Mitsubishi, Toyota, etc. The company produces a wide range of spare parts for heavy trucks MAN, Volvo, Iveco, DAF, Mercedes. In the catalog the manufacturer presents a rich range of ball bearings, steering tips, rods, silent blocks, stabilizers, levers. Experts gave the brand first place in our ranking for creating continent’s largest research center.

Many motorists find Lemforder parts the best for chassis repair. But when buying, it’s important not to get on counterfeit products.

Advantages

  • rich assortment;
  • research work;
  • reliability and durability;
  • high quality.

disadvantages

  • a lot of fakes.

Clickthrough rate

Rating: 4.9

CTR

In recent years, domestic motorists began to give preference for ball bearings of the South Korean manufacturer of CTR. The company was founded in 1971, and after 2 years it began production of chassis parts for the Hyundai automobile plant. The brand boasts awards from the Government of the Republic of Korea, major research center as well as partner relations with GM, Hyundai and Kia Motors. According to experts, the brand Found the optimal balance between affordable price and good quality. This allows the manufacturer to take second place in the ranking.

Russian car owners find CTR ball bearings good alternative to original spare parts. They mark the existence of a catalog. on the official site. The disadvantages include weak threads and limited range.

Advantages

  • high quality;
  • affordable prices;
  • research work;
  • good equipment.

disadvantages

  • weak thread.

Masuma

Rating: 4.8

MASUMA

A major global manufacturer of auto parts is the company MASUMA. The brand has a 17-year history, during which time a small the enterprise has become a large manufacturing company. IN The catalog has more than 45 categories and 10 thousand items. Mastering the production of new company parts helps highly qualified engineering base. In 2016, the head office was moved from Japan to China due to sales growth spare parts in the Middle Kingdom. A large volume of deliveries remains on markets of Russia and Malaysia. Experts gave the bronze of our rating this brand due to unstable durability.

Some users are happy with the MASUMA ball bearings, which take care of more than 30 thousand km. Some car owners have nodes wear out after six months.

Advantages

  • modern Japanese equipment;
  • reasonable prices;
  • rich assortment;
  • full production cycle.

disadvantages

  • unstable quality.

Delphi

Rating: 4.7

DELPHI

The combination of modern equipment and strict quality control allows US company Delphi to keep leading Position in the global spare parts market. Ball bearings of this brand differ in high durability and long service life. The manufacturer is confident in the quality of his products, he gives a guarantee for a year or 50 thousand km. Experts confirm high engine life ball bearings, in some of them the service life reaches 100 thousand km. Despite this, the brand stops a step away from the prize troika. rating.

The final position was influenced by reviews of Russian motorists. They signal the appearance of fakes, which fail after 10 thousand kilometers. Of the merits users note reasonable prices and a rich assortment.

Advantages

  • high strength;
  • large warranty period;
  • acceptable prices;
  • rich assortment.

disadvantages

  • fakes appeared on the Russian market.

555

Rating: 4.6

555

Japan’s Largest Auto Component Manufacturer Sankei Industry Co., Ltd. She owns the brand 555. The manufacturer has successfully passed certification in accordance with requirements of the ISO 9001 standard. High quality of details of a suspension bracket and steering gear have appreciated such famous auto concerns like Toyota, Nissan, Mazda, Honda. Experts draw attention of Russian consumers to the fact that outside of Japan The company has no branches. Therefore, products under the brand name 555 of Malaysia or China is counterfeit.

Motorists have already had to deal with fake ball bearings. Therefore, the brand is located only on line 5 rating. So that car owners buy only the original products, Sankei Industry applies a special hologram.

Advantages

  • high quality;
  • protection against fakes;
  • affordable price;
  • durability.

disadvantages

  • a lot of fakes.

Moog

Rating: 4.5

MOOG

For a long time, the American company MOOG worked only in the market their country. The brand appeared back in 1919, and only in 2001 manufacturer has supplied auto parts to Europe. Specially the MOOG Europe division was established, which focused on the development of new technologies and engineering solutions. Thereby manages to constantly expand the range of products. The experts found in the catalog even ball bearings for cars WHA. Only 10 years have passed since the brand appeared on the European market as a manufacturer has become a leader in terms of sales.

Motorists appreciated dimensional accuracy, high-quality processing and reliable protection against corrosion. But take a higher position in the ranking of the brand failed due to a small service life.

Advantages

  • own developments;
  • exact dimensions;
  • high-quality processing;
  • a wide range of.

disadvantages

  • fragility.

RUVILLE

Rating: 4.4

RUVILLE

Extensive experience in the production of auto parts has accumulated German company RUVILLE. Since its inception (1922), the company Engaged in the production of parts for engines. Today in the catalog there are ball bearings, tension rollers, water pumps, hubs, anthers, belts, etc. Experts note guaranteed quality and the responsible approach of the manufacturer. Products received international certificate of quality standard DIN EN ISO 9002. The trademark deservedly falls into our rating.

According to Russian motorists, RUVILLE ball joints differ in reasonable price, good quality and durability. Of The disadvantages are the absence of a snap ring on the nut. At the installation needs to be careful not to damage detail.

Advantages

  • low price;
  • good quality;
  • long service life;
  • a wide range of.

disadvantages

  • no snap ring on the nut;
  • Neat installation required.

Nipparts

Rating: 4.3

NIPPARTS

A group of Japanese auto parts manufacturers formed in Netherlands company Nipparts. Initially a range of parts limited to Japanese cars, later release was mastered auto components for Korean cars. The company is currently holds first place in terms of sales of parts for Asian cars. And although the manufacturer can not boast own research centers, testing production is carried out at partner sites (Mitsubishi, 555, Kayaba, Asahi). Experts gave the brand eighth place for adequate prices and decent quality.

Users have a number of complaints about Nipparts products. There are cases of counterfeit products, on ball bearings quickly the protective coating wears out.

Advantages

  • a wide range of parts for Asian cars;
  • good quality;
  • low price;
  • brilliant appearance.

disadvantages

  • there are fakes in the market;
  • short-lived coverage.

Mapco

Rating: 4.2

MAPCO

Since 1977, German has been supplying auto parts to the European market Mapco company. The head office is located near Berlin, and production sites operate in different countries of the world. Started manufacturer its activities with the manufacture of parts for brake system. In 1985, the range of spare parts was replenished. auto components for steering gear and suspension. At present time, Mapco’s market share in Germany reached 20% (details steering). Experts note the presence in the catalog reinforced parts that have long opposed Russian roads. The brand falls into our ranking.

Motorists praise ball bearings for quality manufacturing, reasonable prices, resistance to bad roads. But before installation Remove the boot to apply some grease.

Advantages

  • reasonable prices;
  • good quality;
  • a wide range of;
  • wear resistance.

disadvantages

  • no lubrication in ball joints.

TRW

Rating: 4.1

TRW

The German company TRW appeared in the United States through the merger of two Thompson and Ramo-Wooldridge (1958). For a long time American manufacturer conquered the European market, acquiring German enterprises. But in 2015 he was absorbed in large auto parts manufacturer ZF Friedrichshafen. Thanks german pedantry and strict discipline, the brand has improved its position on auto parts market. Experts praised the wide range and decent quality ball bearings. The owners were especially delighted VAZ domestic cars by installing TRW spare parts. The brand closes the TOP-10 of our rating.

As for the shortcomings, the main one is a large the number of fakes on the Russian market. Therefore, the buyer Care must be taken in the selection of spare parts.

Advantages

  • rich assortment;
  • high quality;
  • reliability;
  • durability.

disadvantages

  • a large number of fakes in Russia.

TRACK

Rating: 4.0

TRACK

Holds leading positions in the Russian market for about 20 years domestic company TRACK. Experts note a thorough approach manufacturer for the manufacture of auto parts. Firm may boast of its own laboratory, which is constantly held product testing. A young ambitious team is actively introducing own advanced developments. Purposeful work is not went unnoticed by experts, the brand has many awards for high quality and long service life. Special praise deserves a series of ball joints TRS, they are able to withstand about 100,000 km

The low position in our ranking is explained by critical user reviews. Anthers are poorly made, which is why dirt gets into the hinge and quickly disables it.

Advantages

  • own developments;
  • scientific and technical laboratory;
  • reasonable prices;
  • modern equipment.

disadvantages

  • unreliable anthers.

Cedar

Rating: 3.9

CEDAR

The Russian company Cedar relies on the issue of affordable and quality products. The manufacturer managed to achieve the optimal combinations, confirmation is the delivery of ball bearings to AvtoVAZ conveyor. The manufacturer managed to reduce the percentage of rejects for account verification of details by ultrasound. Ball bearings are completed imported liners, corrugated anthers and reliable fasteners. The service life of ball bearings of the Standard series is declared for around 70 thousand km, and special versions of the Trial and Trial Sport withstand more than 100 thousand kilometers on Russian roads.

Experts have included the brand in our rating for affordability and good quality. Motorists discontent caused by primitive packaging and poor protection against fakes.

Advantages

  • delivery of parts to the AvtoVAZ conveyor;
  • affordable price;
  • modern control methods;
  • the presence of various modifications.

disadvantages

  • primitive packaging;
  • weak protection against fakes.


Attention! This rating is subjective, is not advertising and does not serve as a guide to the purchase. Before the purchase consultation with a specialist is necessary.

Rate article
An online magazine about style, fashion, etiquette, lifestyle, and about choosing the best products and services.
Leave a Reply